This jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the jig into the miter track and locks your setting at the same time. Ball bearing guide keeps your workpiece firmly against the fence for perfect repeatability. Use the graduated scale to fine-tune for extremely thin strips. Note: Ripping thin strips requires the use of a zero-clearance insert, sold separately.The perfect tool for edging, inlay, bent laminations and more.Solid phenolic for durability.Low-profile miter track clamp locks in at any point along the miter track.Also works great on the bandsaw as a single-point fence for cutting curved slats in multiples.Adjusts from 1-3/8" away from your miter track to 5-11/16" away from your miter track, enough for the thinnest ripsMeasures 5-1/4"W x 8"L.The jig is stationary, while the fence is moved for each cut.Fits 3/4" W x 3/8" D Miter Tracks
Interested in the Best Fence System, but already have a miter saw stand? No problem! The Best Fence System is available as an add-on for most of the popular brands of miter saw stands.The Best Fence v3 System was designed from the ground up to give your miter saw a high degree of accuracy in a mobile package. Consisting of adjustment blocks and customizable fence sections, this highly modular system is easy to set up and transport and allows you to dial in your saw for exact cuts every single time.Specially designed precision mounting blocks integrate with your existing DeWalt 723X miter saw stand. The blocks have both coarse adjustments, to quickly move the fences into place, and fine adjustments to fine-tune the fences level and even with the miter saw table. Fences detach easily and can be safely transported with the included carrying bag. Fence stops calibrate quickly and easily by setting the stop to zero and cutting the sacrificial block.Additional fences can be added to extend the capacity of the Best Fence System by using the optional Male-Male Connectors to attach additional sections, with Upper Hand supports as a base for the fence. The optional Crown Molding Stop and Fence Backstop make cutting crown molding a breeze! The Accessory Bag holds the stops and other small accessories.The Best Fence System is also available for Bosch Gravity Rise miter saw stand and Kapex miter saws.Miter saw and saw stand not included.Features:Designed to mount onto DeWalt 723X miter saw stand (not included)Modular systemFits any brand or model of miter sawOffers a precision stop systemOptional accessories:Additional 64" fence sectionCustom length fence sections, from 1 foot to 12 feet in length (additional shipping may apply for fences 6 feet long or longer)Male-male connector for additional fencesUpper Hand support for long fence lengthsCrown molding stopFence backstopAccessory bag
Three varieties of 1-3/8" end cut blades for cutting a wide range of materials with your multi-tool. Use the Wood/Metal blades for cutting wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal, and hardened fillers, the Standard Wood blades for wood, plastic and drywall, and the Precision Wood blades for fine cutting of wood and soft plastics. Great for plunge cutting, shimming and precision cuts. Stepped profile allows the blade to cut flush with the surrounding surface. Designed for use with Rockwell Sonicrafter Multi-Tools RK5139K (46768) and RK5140K (48783). Universal Fit System also allows it to be used with almost any other multi-tool. Also available in packs of 3 (see below).Technical Details:1-3/8" end cut saw blade allows flush cuts, plunge cuts and precision cuts in a variety of materials.Capable of plunge cuts up to 1-5/8" deep.Stepped profile allows cuts flush to the surrounding surface.Use with Rockwell Sonicrafter Multi-Tools RK5139K (46768) and RK5140K (48783).Universal fit system adapts to fit other multi-tool brands.
The PM3000 brings heavyweight performance and patented innovations to the 14-inch table saw arena. The riving knife rises and lowers with the blade, substantially reducing kickback risk; and both riving knife and blade guard each have a quick-release, so mounting and removing them is fast and tool-free. A wide-stance trunnion and concave teeth on the trunnion gears promote smooth blade raising/tilting. The Poly-V drive belt system results in quieter, more efficient power transfer with virtually no vibration and less heat build-up. A push-button arbor lock is accessible from above the table top and eliminates the need for dual arbor wrenches. Easy-access controls include jumbo stop switch. Sloped cabinet floor and built-in port for dust extraction. Comes standard with a 33" DuramineTM surfaced extension table and legs.Quick release riving knife greatly reduces binding/kickback risk Push button arbor lock (patent pending) for rapid blade change Poly-V drive belt system delivers efficient, quiet operation Wide stance heavy-duty trunnion for stability and smooth blade positioning Adjustable angle indicators (patent pending) on the blade bevel scale for repeatable bevel cuts Industrial-duty Accu-Fence System ensures accurate cuts Enclosed cabinet with wide footprint for stability Heavy-duty micro adjustable miter gauge with aluminum extruded fence, for good workpiece guidance and fine angle adjustments Precision ground high luster cast iron table top with front edge bevel prevents snagging of workpiece while positioning Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement Jumbo stop switch offers fast access to controls Built in 4" port for dust collection Standard Equipment:TEFC motor with magnetic controls Standard left and right cast iron table wings Accu-Fence System with 50" to the right cutting capacity Extension table and legs Arbor wrench Motor coverBlade, power cord plug not included