Products tagged with: adhesives epoxy

Pages: 1

3M Spray Mount

3M Spray Mount
$17.99

This repositionable spray adhesive is ideal for projects that require a wrinkle free temporary hold. Unlike other adhesives you can remove items you've attached and reuse the mounting surface if desired. This spray is ideal for use with templates and stencils. (Very handy for scroll saw work!)3M's spray mount dries clear and doesn't bleed colors.

Loctite Quick Set Epoxy

Loctite Quick Set Epoxy
$5.99

Creates a high strength, waterproof bond in only 4-6 minutes - no mixing required! Convenient syringe dispenses equal amounts of epoxy and hardener through a self-mixing nozzle for an easy no-mess application. Includes two self-mixing nozzles. Works on wood, metal, ceramic, glass, plastic and tile. Resistant to solvents. 0.47 oz. tube.

Quick Cure 5-Minute Epoxy

Quick Cure 5-Minute Epoxy
$24.99

Get permanent repairs on wood, fiberglass, concrete, ceramics, glass, leather and plastics in only five minutes! Easy to measure, solvent free. 8 oz.

Quikwood Epoxy Putty Stick

Quikwood Epoxy Putty Stick
$10.99

The Woodworker's Dream! Repair, Rebuild, and Restore Anything Made of Wood.Quikwood is a remarkable polymer compound for instant wood repair. Easy-to-use: molds like clay, then dries like wood in 30 minutes. Also great for wood-to-wood and wood-to-metal bonding.Fill holes, scratches, gauges, cracks, dry rot and knot holesRepair furniture, molding and framesReshape woodcarvings, remold wood knobs and handlesCan be sculpted or carved for intricate detailInterior and exterior applicationsTechnical Details:No runs or mess! Specially formulated to be same density as wood.Can be sanded, drilled, shaped, painted, or stained. Will not shrink or crack once dryHand kneadable mixture contains no solvent. Non-Toxic.After 15-20 minutes the epoxy will begin to form a tenacious bondAfter just 60 minutes, Quikwood can be drilled, sawed, carved, sanded, stained, or painted.Ideal for fabricating and reshaping furniture legs, carvings, etc.Quikwood may be used in interior and exterior applications.Sanding of cured Quikwood is recommended prior to applying paint or stain.Quikwood may accept stain differently than wood, test before using.The unused portion of Quikwood will remain stable for years if stored in its container at room temperature.

Quikwood Epoxy Putty Stick-1 Ounce

Quikwood Epoxy Putty Stick-1 Ounce
$5.99

The Woodworker's Dream! Repair, Rebuild, and Restore Anything Made of Wood.Quikwood is a remarkable polymer compound for instant wood repair. Easy-to-use: molds like clay, then dries like wood in 30 minutes. Also great for wood-to-wood and wood-to-metal bonding.Fill holes, scratches, gauges, cracks, dry rot and knot holesRepair furniture, molding and framesReshape woodcarvings, remold wood knobs and handlesCan be sculpted or carved for intricate detailInterior and exterior applications

T-88 Structural Epoxy

T-88 Structural Epoxy
$25.99

Specially designed to hold up against water, gasoline and most chemicals. Forms a tough, permanent, non-brittle bonds on most clean surfaces. Dries to a clear amber that is virtually invisible when varnished. Contains two 4 ounce bottles.

Titebond Cold Press for Veneer

Titebond Cold Press for Veneer
$10.99

Titebond Cold Press for Veneer is a high-quality glue, for large-scale bonding of veneers to flat surfaces using a Vacuum Press or Veneer Press.It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials.Titebond Cold Press offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and unbacked wood veneers.

Veneer Glycerine

Veneer Glycerine
$9.99

Veneer glycerin will soften and flatten even brittle and fragile veneers, making them stronger, more stable, flatter and less likely to split. Ideal for use on face grade and dimensional veneer. Glycerin mixes with water and alcohol, and will not affect finishing.What's in the Box One 4 ounce bottle of veneer glycerin

WEST SYSTEM Epoxy-Hardener

WEST SYSTEM Epoxy-Hardener
$24.99

Highly trusted by boat-builders, WEST SYSTEM Epoxy is ideal for use as an ultra-tough waterproof coating, a high-strength, gap-filling adhesive or an easily sanded surface filler. The Resin works in conjunction with a variety of WEST SYSTEM Hardeners, Fillers and Pumps for a wide range of applications.The 105 Epoxy Resin is the base material of the WEST SYSTEM family. A clear, pale yellow, low-viscosity resin, 105 forms a high-strength solid with excellent moisture resistance, and is designed specifically for wood fiber, fiberglass, reinforcing fabrics and a variety of metals. 105 Resin105 Resin viscosity is approximately 1000 cP (centipoise) at 72°F (22°C).Coverage for "A" resin containers: Porous surfaces: 90-105 sq. ft. (8.5-10m2)Non-porous surfaces: 120-135 sq. ft. (11-12.5 m2)Coverage for "B" resin containers: Porous surfaces: 350-430 sq. ft. (32-40 m2)Non-porous surfaces: 462-550 sq. ft. (43-50 m2)Combined with 205 Fast, 206 Slow and 209 Extra-Slow Hardeners, the cure time of 105 can be fine-tuned and adjusted for a wide range of temperatures. For coating and roller applications, it can be combined with 207 Coating Hardener, which provides excellent thin-film characteristics to flow out and self-level without "fisheyeing." Cures clear to light amber, so you can achieve a natural wood finish when coating with varnish. 205 Fast HardenerPot life at 72°F (22°C) - 9 to 12 minutes.Cure to a solid state - 6 to 8 hours.Cure to maximum strength - 1 to 4 days.Minimum recommended temperature - 40°F (4°C).206 Slow HardenerPot life at 72°F (22°C) - 20 to 25 minutes.Cure to a solid state - 9 to 12 hours.Cure to maximum strength - 1 to 4 days.Minimum recommended temperature - 60°F (16°C).209 Extra-Slow HardenerPot life at 72°F (22°C) - 40 to 50 minutes.at 95°F (35°C) - 15 to 20 minutes.Cure to a solid state at 72°F (22°C) - 20 to 24 hours. at 95°F - 6 to 8 hours(35°C).Cure to maximum strength at 72°F - 4 to 9 days.Minimum recommended temperature - 70°F (21°C).206 Coating HardenerPot life at 72°F (22°C) - 22 to 27 minutes.Cure to a solid state - 9 to 12 hours.Cure to maximum strength - 4 to 7 days.Minimum recommended temperature - 60°F (16°C).When combined with 404 High Density Filler (optimum strength) 407 Low Density Filler (optimum volume) or 406 Colloidal Silica Filler (optimum versatility), WEST SYSTEM epoxy will bridge large gaps and voids and can be easily sanded and shaped when cured. It has no strong solvent odor, making it far safer and more pleasant to work with. Round out your set with the 300 Mini Pump Set, which includes one resin and two hardener pumps calibrated to dispense perfect ratios every time. Pumps mount directly on the resin and hardener containers, eliminating mess, and include extension tubes for various container sizes. NOTE: "A" and "B" sized resin containers correspond with "A" and "B" sized hardener containers. The 300 Mini Pumps can be configured to fit any size.

West System Mini Pump Set

West System Mini Pump Set
$17.99

The 300 Mini Pump Set, which includes one resin and two hardener pumps calibrated to dispense perfect ratios every time. Pumps mount directly on the resin and hardener containers, eliminating mess, and include extension tubes for various container sizes. NOTE: "A" and "B" sized resin containers correspond with "A" and "B" sized hardener containers. The 300 Mini Pumps can be configured to fit any size.

WEST SYSTEM&reg Epoxy-Epoxy Resin

WEST SYSTEM&reg Epoxy-Epoxy Resin
$54.99

Highly trusted by boat-builders, WEST SYSTEM Epoxy is ideal for use as an ultra-tough waterproof coating, a high-strength, gap-filling adhesive or an easily sanded surface filler. The Resin works in conjunction with a variety of WEST SYSTEM Hardeners, Fillers and Pumps for a wide range of applications.The 105 Epoxy Resin is the base material of the WEST SYSTEM family. A clear, pale yellow, low-viscosity resin, 105 forms a high-strength solid with excellent moisture resistance, and is designed specifically for wood fiber, fiberglass, reinforcing fabrics and a variety of metals. 105 Resin105 Resin viscosity is approximately 1000 cP (centipoise) at 72°F (22°C).Coverage for "A" resin containers: Porous surfaces: 90-105 sq. ft. (8.5-10m2)Non-porous surfaces: 120-135 sq. ft. (11-12.5 m2)Coverage for "B" resin containers: Porous surfaces: 350-430 sq. ft. (32-40 m2)Non-porous surfaces: 462-550 sq. ft. (43-50 m2)Combined with 205 Fast, 206 Slow and 209 Extra-Slow Hardeners, the cure time of 105 can be fine-tuned and adjusted for a wide range of temperatures. For coating and roller applications, it can be combined with 207 Coating Hardener, which provides excellent thin-film characteristics to flow out and self-level without "fisheyeing." Cures clear to light amber, so you can achieve a natural wood finish when coating with varnish. 205 Fast HardenerPot life at 72°F (22°C) - 9 to 12 minutes.Cure to a solid state - 6 to 8 hours.Cure to maximum strength - 1 to 4 days.Minimum recommended temperature - 40°F (4°C).206 Slow HardenerPot life at 72°F (22°C) - 20 to 25 minutes.Cure to a solid state - 9 to 12 hours.Cure to maximum strength - 1 to 4 days.Minimum recommended temperature - 60°F (16°C).209 Extra-Slow HardenerPot life at 72°F (22°C) - 40 to 50 minutes.at 95°F (35°C) - 15 to 20 minutes.Cure to a solid state at 72°F (22°C) - 20 to 24 hours. at 95°F - 6 to 8 hours(35°C).Cure to maximum strength at 72°F - 4 to 9 days.Minimum recommended temperature - 70°F (21°C).206 Coating HardenerPot life at 72°F (22°C) - 22 to 27 minutes.Cure to a solid state - 9 to 12 hours.Cure to maximum strength - 4 to 7 days.Minimum recommended temperature - 60°F (16°C).When combined with 404 High Density Filler (optimum strength) 407 Low Density Filler (optimum volume) or 406 Colloidal Silica Filler (optimum versatility), WEST SYSTEM epoxy will bridge large gaps and voids and can be easily sanded and shaped when cured. It has no strong solvent odor, making it far safer and more pleasant to work with. Round out your set with the 300 Mini Pump Set, which includes one resin and two hardener pumps calibrated to dispense perfect ratios every time. Pumps mount directly on the resin and hardener containers, eliminating mess, and include extension tubes for various container sizes. NOTE: "A" and "B" sized resin containers correspond with "A" and "B" sized hardener containers. The 300 Mini Pumps can be configured to fit any size.

WEST SYSTEM&reg Epoxy-Filler

WEST SYSTEM&reg Epoxy-Filler
$16.99

Highly trusted by boat-builders, WEST SYSTEM Epoxy is ideal for use as an ultra-tough waterproof coating, a high-strength, gap-filling adhesive or an easily sanded surface filler. The Resin works in conjunction with a variety of WEST SYSTEM Hardeners, Fillers and Pumps for a wide range of applications.The 105 Epoxy Resin is the base material of the WEST SYSTEM family. A clear, pale yellow, low-viscosity resin, 105 forms a high-strength solid with excellent moisture resistance, and is designed specifically for wood fiber, fiberglass, reinforcing fabrics and a variety of metals. 105 Resin105 Resin viscosity is approximately 1000 cP (centipoise) at 72°F (22°C).Coverage for "A" resin containers: Porous surfaces: 90-105 sq. ft. (8.5-10m2)Non-porous surfaces: 120-135 sq. ft. (11-12.5 m2)Coverage for "B" resin containers: Porous surfaces: 350-430 sq. ft. (32-40 m2)Non-porous surfaces: 462-550 sq. ft. (43-50 m2)Combined with 205 Fast, 206 Slow and 209 Extra-Slow Hardeners, the cure time of 105 can be fine-tuned and adjusted for a wide range of temperatures. For coating and roller applications, it can be combined with 207 Coating Hardener, which provides excellent thin-film characteristics to flow out and self-level without "fisheyeing." Cures clear to light amber, so you can achieve a natural wood finish when coating with varnish. 205 Fast HardenerPot life at 72°F (22°C) - 9 to 12 minutes.Cure to a solid state - 6 to 8 hours.Cure to maximum strength - 1 to 4 days.Minimum recommended temperature - 40°F (4°C).206 Slow HardenerPot life at 72°F (22°C) - 20 to 25 minutes.Cure to a solid state - 9 to 12 hours.Cure to maximum strength - 1 to 4 days.Minimum recommended temperature - 60°F (16°C).209 Extra-Slow HardenerPot life at 72°F (22°C) - 40 to 50 minutes.at 95°F (35°C) - 15 to 20 minutes.Cure to a solid state at 72°F (22°C) - 20 to 24 hours. at 95°F - 6 to 8 hours(35°C).Cure to maximum strength at 72°F - 4 to 9 days.Minimum recommended temperature - 70°F (21°C).206 Coating HardenerPot life at 72°F (22°C) - 22 to 27 minutes.Cure to a solid state - 9 to 12 hours.Cure to maximum strength - 4 to 7 days.Minimum recommended temperature - 60°F (16°C).When combined with 404 High Density Filler (optimum strength) 407 Low Density Filler (optimum volume) or 406 Colloidal Silica Filler (optimum versatility), WEST SYSTEM epoxy will bridge large gaps and voids and can be easily sanded and shaped when cured. It has no strong solvent odor, making it far safer and more pleasant to work with. Round out your set with the 300 Mini Pump Set, which includes one resin and two hardener pumps calibrated to dispense perfect ratios every time. Pumps mount directly on the resin and hardener containers, eliminating mess, and include extension tubes for various container sizes. NOTE: "A" and "B" sized resin containers correspond with "A" and "B" sized hardener containers. The 300 Mini Pumps can be configured to fit any size.

Pages: 1