Products tagged with: bolts and hardware

Pages: first pageprev page1 2

Replacement Kreg Klamp Blocks with T-Bolts and Knobs, 5-Pack

Replacement Kreg Klamp Blocks with T-Bolts and Knobs, 5-Pack
$15.99

Position these adjustable Klamp Blocks on the Kreg Klamp Table (36078, sold separately) to quickly square up frame parts for connecting with pocket-hole joinery. Package of 5 Klamp Blocks with T-bolts and knobs for mounting.

Rockler 129-pc Jig Hardware Kit 5/16"-18 ($150 Value)

Rockler 129-pc Jig Hardware Kit 5/16"-18 ($150 Value)
$69.99

With all the essential hardware for building or repairing custom jigs, this kit will be a fixture in your shop for years to come. T-bolts will fit all Rockler Universal T-Tracks.129-Piece Kit Includes:1" T-bolts (20)1-1/2" T-bolts (20)2-1/2" T-bolts (10)3-1/2" T-bolts (10)5-star insert knobs (4)5-star bolt knobs (4)2" T-knobs (6)4-star insert knobs (6)4-star bolt knobs (6)1" round knobs (10)Storage case (1)Threaded inserts (16)T-nuts (16)Note:Bottom plates on 5/16"-18 T-bolts measure 9/16" W x 7/8" L x 7/64" H.

Rockler Deluxe Jig Handle

Rockler Deluxe Jig Handle
$4.99

This ergonomically designed handle helps you maintain a firm, comfortable grip on a variety of shop-made jigs. Rugged molded plastic construction with two threaded inserts embedded in the bottom for solid and easily removable attachment to push blocks, router table sleds and more.Technical DetailsComfortable, ergonomic design is perfect for push blocks and other jigs.Base has two 1/4"-20 threaded inserts for easy attachment to any push block or jig design.Requires two 1/4"-20 screws.Measures 1" thick x 4-1/2" long x 5-5/8" high.Molded plastic.

Rockler Hold Down Clamp, 5-1/2''L x 1-1/8''W

Rockler Hold Down Clamp, 5-1/2''L x 1-1/8''W
$10.99

These Hold Down Clamps feature non-marring rubber tips that are ideal for working with soft woods, pre-finished panels, or anything that's already been prep sanded. The rubber clamp faces also help to grip the workpiece for better safety and accuracy. In addition, they have a wide aluminum body, allowing for maximum tension. Clamps include a 5-star knob and a 5/16" T-bolt designed to fit into T-tracks on drill presses, router tables and more. The Hold Down Clamp, 5-1/2"L x 3/4"W provides the same great features as the 5-1/2"L x 1-1/8"W version, but in a slimmer width and without the non-marring rubber tips.5-1/2" long x 1-1/8" wide.Crafted of solid anodized aluminum.Clamps material up to 2-1/2" thick.Rubber tips help grip and protect workpiece.5/16" T-bolt is compatible with our Universal T-Track.

Rockler JIG IT Hardware Kit

Rockler JIG IT Hardware Kit
$31.99

Build your own jigs with our JIG IT hardware value pack. Assorted T-bolts, knobs, and inserts for customizing your own jigs and fixtures for your shop.A $36.00 Value. The kit contains: 4 each of #23812 5 Star Knob 5/16" - 18tpi thru 4 each of #23846 5 Star Knob 5/16" - 18tpi stud 4 each of #71514 2" T-Knob 5/16" - 18tpi thru 1 pack of #26062 Tee-Nuts 5/16" - 18tpi (8 per pack) 1 pack of #28811 5/16" - 18tpi Threaded Insert (8 per pack) 6 each of #33965 5/16" x 1" T-Bolt 6 each of #83311 5/16" x 1-1/2" T-bolt 6 each of #33939 5/16" x 2-1/2" T-Bolt

Rockler Miter Slot Hardware Kit

Rockler Miter Slot Hardware Kit
$7.99

Make your own jigs and hold-downs!Excellent for attaching featherboards, hold-downs and special jigs to your table saw, router table, disc sander or any other tool with a standard 3/4" wide x 3/8" deep miter gauge slot.Hardware kit allows you to make your own jigs and hold-downs.4-3/4" long slot bars fit both square and T-shaped miter gauge slots, and expand in the slot as you tighten the knob.Kit includes two slot bars, knobs with screws, and washers.

Rockler Short Stop for Rockler T-Track System

Rockler Short Stop for Rockler T-Track System
$6.99

Combined with your T-Track Table, these stops give you a fast, accurate work holding solution for a wide variety of applications. The stops feature low-profile knobs that fold flat for easy clearance when sanding or machining. Short Stops can be used on one end of the board to hold your work while belt sanding, hand planing, or scraping dried glue off of a panel. The keyway on the bottom of the Short Stop runs parallel to the stop face. Two other stop styles are available separately: Inline (with keyway perpendicular to stop face) and Long (keyway parallel to stop face).

Rockler Stop Kit for Rockler T-Track System

Rockler Stop Kit for Rockler T-Track System
$24.99

For a versatile starter set, try our T-Track Stop Kit, which includes two Inline Stops and two Short Stops. This kit will get you started using the stops for work holding and light machining applications. The stops feature low-profile knobs that fold flat for tool clearance. Use the Short Stops on one end of the board to hold your work while belt sanding, hand planing, or scraping dried glue. Use the Inline Stops to sandwich a board so you can work in either direction. For light clamping pressure, tap some carpenter's shims between one of the Inline Stops. A third style-the Long Stop- is available separately (46010).

Rockler T-Track Hold Down

Rockler T-Track Hold Down
$24.99

Add to your jig and fence making capabilities with these specially designed hold downs. A slotted T-track connector head is molded into the body and allows you to secure any T-track device to your work surface to create fences, straight edges and jigs. Steel threaded shaft and large ergonomic handle make adjustment easy. Works great with the new Multi-Track (34262 and 35605, sold separately). Aluminum body.

Stop Block Kit

Stop Block Kit
$8.99

Set it on the T-slot track for making the same length cuts over and over.You get a 5 star knob, a 1 1/2" long T-slot bolt and a 2" rabbeted stop block. Ideal for use on a drill press table, router table or miter gauge fence.

T-Slot Bolts, Pack of Five-1/4" - 20 Thread

T-Slot Bolts, Pack of Five-1/4" - 20 Thread
$3.99

Customize your own jigs. The T-heads fit inside T-slot track or a groove routed with T-slot bit #26099.Available in 5/16"-18 thread or 1/4"-20 thread.5/16" - 18 bolt bottom plates are 9/16"W x 7/8"L x 7/64"H. 1/4" - 20 bolt bottom plates are 9/16"W x 11/16"L x 7/64"H. Zinc-plated steel.Sold in packs of five.

T-Slot Bolts, Pack of Five-5/16" - 18 Thread

T-Slot Bolts, Pack of Five-5/16" - 18 Thread
$4.99

Customize your own jigs. The T-heads fit inside T-slot track or a groove routed with T-slot bit #26099.Available in 5/16"-18 thread or 1/4"-20 thread.5/16" - 18 bolt bottom plates are 9/16"W x 7/8"L x 7/64"H. 1/4" - 20 bolt bottom plates are 9/16"W x 11/16"L x 7/64"H. Zinc-plated steel.Sold in packs of five.

T-Slot Bolts-5/16" - 18 Thread T-Slot Bolts

T-Slot Bolts-5/16" - 18 Thread T-Slot Bolts
$1.49

Well-made T-slot bolts can make the difference between a jig that is a pleasure to use, and one that is downright frustrating. These T-bolts have smooth, clean threads for spin-on, spin-off ease when making adjustments to your woodworking jigs and fixtures. They have a smooth finish and rounded corners that make it easy to slide your T-slot stops to the mark without binding. Use them with our aluminum T-tracks or machine your own wooden T-tracks with our T-slot Router Bit (Rockler #26099). Lengths range from 1" to 3-1/2" (see below for selection).Technical Details:Zinc plated steel5/16" x 18 TPI threadingLengths from 1" to 3-1/2"Foot measures 9/16" wide x 7/8" long x 7/64" thickBest Used With:Universal T-TracksT-slot Router Bit (Rockler #26099)

T-Track Tape Measures

T-Track Tape Measures
$10.99

Need a measuring reference on your T-Track device? These 36'' plastic t-track tape measure inserts fit any universal T-Track (up to 48" in length) to give you accurate measurements to 1/16" along your fence for on the fly adjustments and more. Use for setting up fence measurement from the edge of your blade or cutter.Ideal for use with all Universal T-Tracks, Multi Tracks, and Double T-Track Fence Caps. Each tape comes with an acrylic hairline indicator with adhesive backing that can be attached to Rockler Flip Stops (26991 and 31214) or other homemade stops. The 48" steel rule can be cut to fit the 36" plastic extrusion depending on your needs. Cut your steel measure for either a standard 36" length or beginning a specific distance from zero when setting up a measurement to blade or cutter style fence.

Pages: first pageprev page1 2