Products tagged with: clamps

Pages: first pageprev page1 2 3 4 5next pagelast page

Four Irwin Parallel Clamps w/Clamp Rack

Four Irwin Parallel Clamps w/Clamp Rack
$191.95

Irwin Parallel Clamps:With jaws that stay perfectly parallel, these clamps are ideal for accurate clamping of casework and drawers. The unique handle doubles as a clutch - just pull up to disengage. Clutch prevents clamp head from sliding down and pinching your fingers while on the clamp rack. The bar has no serrations, so the jaws slide smoothly and dried glue flakes off easily. Non-marring jaws are a full 2'' in width to spread clamping pressure over a greater surface area. Extra long screw thread gives a long clamping reach. Removable foot allows you to reverse the head for use as a spreader. 3-3/4'' throat depth.Parallel Clamp Rack:Organize your bulky parallel clamps once and for all. This specially designed rack holds all brands of parallel clamps - up to 12 in all - for easy and convenient storage. Pre-drilled holes are 16'' on center for simple mounting to wall studs. Store parallel clamps up to 50'' in length. Durable galvanized steel construction. 24'' inches long.

Irwin 90 Degree Angle Clamp, While Supplies Last!

Irwin 90 Degree Angle Clamp, While Supplies Last!
$29.99

Get a true Right Angle joint every time! This Irwin 90 Degree Angle Clamp is excellent for corner clamping materials up to 3" thick, and acts as a third hand to hold the joint tight while you join it using glue, screws, or nails. Shown with optional Universal Fence Clamp sold separately.Technical Details: Holds two pieces firmly together while you join them using glue, pocket screws, nails, or more Ideal for large corner items, crown molding up to 3" thick, picture frames, and more Holds materials up to 3" thick at a 90° angle Exerts up to 200-lb. of pressure to your joint Composite plastic body with steel screws Cushioned grip 4-3/4"H x 3"W x 11-7/8"L Full lifetime warranty

Irwin Parallel Clamp, 24"

Irwin Parallel Clamp, 24"
$39.99

With jaws that stay perfectly parallel, these clamps are ideal for accurate clamping of casework and drawers. The unique handle doubles as a clutch - just pull up to disengage. Clutch prevents clamp head from sliding down and pinching your fingers while on the clamp rack. The bar has no serrations, so the jaws slide smoothly and dried glue flakes off easily. Non-marring jaws are a full 2" in width to spread clamping pressure over a greater surface area. Extra long screw thread gives a long clamping reach. Removable foot allows you to reverse the head for use as a spreader. 3-3/4" throat depth. For better alignment, see our Rockler Parallel Clamp Blocks. The unique design guarantees parallel alignment for strong, solid holds.

Irwin Parallel Clamp, 48"

Irwin Parallel Clamp, 48"
$47.99

With jaws that stay perfectly parallel, these clamps are ideal for accurate clamping of casework and drawers. The unique handle doubles as a clutch - just pull up to disengage. Clutch prevents clamp head from sliding down and pinching your fingers while on the clamp rack. The bar has no serrations, so the jaws slide smoothly and dried glue flakes off easily. Non-marring jaws are a full 2" in width to spread clamping pressure over a greater surface area. Extra long screw thread gives a long clamping reach. Removable foot allows you to reverse the head for use as a spreader. 3-3/4" throat depth. For better alignment, see our Rockler Parallel Clamp Blocks. The unique design guarantees parallel alignment for strong, solid holds.

Irwin Quick-Grip 12'' Mini Bar Clamps, 2-Pack

Irwin Quick-Grip 12'' Mini Bar Clamps, 2-Pack
$19.99

With their light weight and fast-acting, one-handed operation, Irwin's 12" Quick-Grip Mini Bar Clamps are the ideal solution for gluing up smaller projects or for use as hold-downs on your workbench. Cinch the clamp tight with the beefy trigger handle, and pop it loose with the smaller trigger-all with only one hand! The Irwin 12" Quick-Grip Mini Bar Clamps are sold in packs of two.Technical Details:Irwin Quick-Grip 12" Mini Bar Clamps open to 12". The clamp's throat depth is 2-7/16".Soft, pliable clamp pads protect your finish.High carbon, heat treated steel bar.Handle and jaws are engineered for optimum balance of strength and light weight.

Irwin SL300 Quick-Grip Clamp Set

Irwin SL300 Quick-Grip Clamp Set
$57.28

Because not every workpiece has square edges, these clamps feature a swiveling jaw that conforms to angled surfaces and combats the inevitable flexing that occurs with resin clamps. It also features a spring-loaded, quick-change screw that makes it easy to reverse the fixed end and transform the clamp to a high-performance spreader. The screw also eliminates rattle in the end jaw. A heavy-duty I-Beam Bar allows you to apply 300 lbs. of clamping pressure with minimal bending and flexing. All these improvements come without any added weight, so the clamp retains its chief benefit: simple one-handed operation.Quick-release trigger provides fast positioning and maximum hand comfort.High-tech resin construction for light weight and a long clamp life.Heat-treated, black oxide carbon steel I-Beam Bar for extreme durability.Protective resin jaw pads are removable.Patented locking swivel jaw locks/unlocks with a flip of a switch.

Jet Parallel Clamp Kit

Jet Parallel Clamp Kit
$269.99

Get two 24" and two 40" parallel clamps featuring the largest clamping surface in the industry plus four framing blocks for squaring up assemblies and four bench dogs! Clamps feature a 4-1/8" jaw depth, jaws that can reverse to convert clamp to a spreader, and ergonomic handles with soft grip for added comfort and increased torque.

Jet Parallel Clamps

Jet Parallel Clamps
$44.99

Upgrade your workbench clamps and get the largest clamping surface in the industry!Jaw depth is 4-1/8".Features non-marring composite resin jaw faces that provide even clamping pressure. Jaws also reverse as a spreader.Ergonomic handle has soft grip for added comfort and increased torque.With Slide-Glide trigger for fast, easy adjustments and rule measurement system for a consistent setup.Moveable end stop helps preset clamping capacity.Clamps sold individuallyFor easy, accurate alignment, see our Rockler Parallel Clamp Blocks.

Jorgensen Pony Cabinet Claw Clamps, Set of 2

Jorgensen Pony Cabinet Claw Clamps, Set of 2
$82.99

Install face-frame cabinets like a professional! Unique time-saving clamps have all-in-one design that allows you to tighten, align, pre-drill and fasten in one easy process.Accuracy is assured with these multi-function clamps.Clamping jaws align and tighten face frames.You can fasten face frames without removing or repositioning the clamps.Die-cast aluminum claws and alignment plate have protective felt pads to prevent marring.Allows you to install two stiles from 1-1/2" to 2" wide and up to 1-1/2" thick (each).

Kreg 90 Degree Corner Clamp

Kreg 90 Degree Corner Clamp
$34.99

Clamping corners just got easier! This innovative holder lets you quickly square and secure individual joints on drawers, shelving, and more.Additional features:Self-squaring design ensures precise results, every time. Quick-adjust handle lets you make fast and easy adjustments on stock up to 1-1/4"thick.Innovative swivel head and quick-release lever provide easy operation andmaximum efficiency.Large clamping surface protects soft woods against marking.Durable heat-treated steel construction features nickel plating for additionallongevity.

Kreg Automaxx 3'' Bench Klamp

Kreg Automaxx 3'' Bench Klamp
$37.99

Automaxx Bench Klamps automatically adjust for any thickness of material, eliminating the need to readjust the clamp when changing stock. Whether you're clamping a 2x4 or a piece of veneer, one squeeze is all it takes to secure your work. The clamping force is easily set with a thumbscrew, and once set, stays the same for all materials. Bench Klamps slide into bench-mounted Klamp Traks and Klamp Plates (sold separately), providing a versatile 360-degree clamping station. Use them singly or in combination for a variety of woodworking tasks. Kreg Automaxx Klamps are also available as a standalone Face Klamp ( #47644 Sold Separately).Technical Details: Bench Klamps are compatible with Kreg Klamp Plate, Klamp Trak, and Klamp Vise Plate. Auto Adjust technology automatically adjusts to any thickness.Clamps materials up to 2-1/2" thick.3&quot throat depth.Easy-to-regulate clamping force using a simple thumbscrew.Extra-large padded clamp spreads clamp pressure evenly.Ergonomic padded grips prevent hand fatigue.Heavy-duty all-metal construction.

Kreg Automaxx 3'' Face Klamp

Kreg Automaxx 3'' Face Klamp
$29.99

Automaxx Face Klamps automatically adjust for any thickness of material, eliminating the need to readjust the clamp when changing stock. Whether you're clamping a 2x4 or a piece of veneer, one squeeze is all it takes to secure your work. The clamping force is easily set with a thumbscrew, and once set, stays the same for all materials. As stand alone clamps, Face Klamps provide excellent versatility for a variety of woodworking tasks. Kreg Automaxx Klamps are also available in a Bench Klamp configuration e.g. 48555, (Sold Seperately) for use with Klamp Traks, Klamp Plates and Rockler T-Tracks. You can also try Automaxx Bar Clamps (Sold Seperately) and Automaxx Heavy-Duty Bar Clamps (Sold Seperately) for larger projects.Technical Details:Auto Adjust technology automatically adjusts to any thickness.Clamps materials up to 2-7/8" thick.3" throat depth.Easy-to-regulate clamping pressure using a simple thumbscrewExtra-large clamp faces spread clamp pressure evenly.Ergonomic padded grips prevent hand fatigue.Heavy-duty all-metal construction.Compatible with Kreg Jig, Kreg Portable Base, and Kreg Jig Jr.

Kreg Automaxx 6'' Bench Klamp

Kreg Automaxx 6'' Bench Klamp
$44.99

Automaxx Bench Klamps automatically adjust for any thickness of material, eliminating the need to readjust the clamp when changing stock. Whether you're clamping a 2x4 or a piece of veneer, one squeeze is all it takes to secure your work. The clamping force is easily set with a thumbscrew, and once set, stays the same for all materials. Bench Klamps slide into bench-mounted Klamp Traks andKlamp Plates (sold separately), providing a versatile 360-degree benchtop clamping station. Use them singly or in combination for a variety of woodworking tasks. Kreg Automaxx Klamps are also available as a standalone Face Klamp.Technical Details: Bench Klamps are compatible with Kreg Klamp Plate, Klamp Trak, and Klamp Vise PlateAuto Adjust technology automatically adjusts to any thickness.Clamps materials up to 4-1/2" thick.Easy-to-regulate clamping force using a simple thumbscrew.Extra-large padded clamp spreads clamp pressure evenly.Ergonomic padded grips prevent hand fatigue.Heavy-duty all-metal construction.

Kreg Automaxx 6'' Face Klamp

Kreg Automaxx 6'' Face Klamp
$37.99

Automaxx Face Klamps automatically adjust for any thickness of material, eliminating the need to readjust the clamp when changing stock. Whether you're clamping a 2x4 or a piece of veneer, one squeeze is all it takes to secure your work. The clamping force is easily set with a thumbscrew, and once set, stays the same for all materials. As stand alone clamps, Face Klamps provide excellent versatility for a variety of woodworking tasks. Kreg Automaxx Klamps are also available in a Bench Klamp configuration (e.g. 48555, sold separately) for use with Klamp Traks, Klamp Plates and Rockler T-Tracks.Technical Details:Auto Adjust technology automatically adjusts to any thickness.Clamps materials up to 4-1/4" thick.Easy-to-regulate clamping pressure using a simple thumbscrew.Extra-large clamp faces spread clamp pressure evenly.Ergonomic padded grips prevent hand fatigue.Heavy-duty all-metal construction.Compatible with Kreg Jig, Kreg Portable Base, and Kreg Jig Jr.

Kreg Automaxx Bench Klamp System

Kreg Automaxx Bench Klamp System
$49.99

The Kreg Automaxx Bench Klamp System combines a 3" Bench Klamp with a Klamp Plate for a versatile 360-degree benchtop clamping station. Automaxx Bench Klamps automatically adjust for any thickness of material, eliminating the need to readjust the clamp when changing stock. Whether you're clamping a 2x4 or a piece of veneer, one squeeze is all it takes to secure your work. The clamping force is easily set with a thumbscrew, and once set, stays the same for all materials.Technical Details:Combines a 3" Automaxx Bench Klamp with a Kreg Klamp Plate.Auto Adjust technology automatically adjusts to any thickness.Clamps materials up to 2-1/2" thick.Easy-to-regulate clamping force using a simple thumbscrew.Extra-large padded clamp spreads clamp pressure evenly.Ergonomic padded grips prevent hand fatigue.Heavy-duty all-metal construction.Bench Klamps are compatible with Kreg Klamp Plate, Klamp Trak, and Klamp Vise Plate, as well as Rockler T-Tracks and the Rockler T-Track Table Top (46654, sold separately).

Kreg Extra Large Face Clamp

Kreg Extra Large Face Clamp
$39.99

Use these soft-gripped clamps to ensure perfectly flush pocket-hole joint lines everytime. Without clamping, the joint can misalign if the screws follow the grain of the wood. These clamps eliminate that threat and deliver cleaner, more precise fits. 10" Reach.Also available in two other sizes: Premium (3-1/4" reach) and Large (6" reach).Each clamp features a soft rubber handle for comfortable operation. To use the clamps, place the large pad of the clamp directly over the center of the joint line on the face side of the workpiece (opposite the pocket holes), then clamp with moderate pressure and drive a screw.

Kreg Large Face Clamp, with Soft Grip Handles

Kreg Large Face Clamp, with Soft Grip Handles
$29.99

Now with soft-grip handles for more comfortable operation! This clamp is the ideal size for pocket hole joinery on larger work pieces. A large clamping pad ensures perfectly flush joint lines and won't damage your wood. Without a clamp like this, the joint can sometimes misalign if the screw follows the grain of the wood.To use, place the large pad of the clamp directly over the center of the joint line on the face side of the workpiece (opposite the pocket holes), clamp with moderate pressure and drive a screw.Features a large, easy-to-grip handle for maximum leverage in clamping.Oversized 6" throat depth reaches across most frame widths.Ideal for flat stock, including face and mitered picture frames.Maximum opening: 5"

Kreg Premium Face Clamp

Kreg Premium Face Clamp
$21.99

Designed specifically for pocket hole joinery, the broad clamp faces and deep throat on the Premium Kreg Face Clamp enable you to clamp directly over the joint line, ensuring a perfectly flush seam. Without a face clamp, the pocket screw can follow the grain of the wood, resulting in misalignment. The vise-grip style clamp action makes it easy to engage and disengage the Kreg clamp with one hand. Its generous 3-1/4" throat depth makes it a true deep throat clamp, capable of reaching across most face frame stiles.Technical Details:The premium Kreg clamp features soft-grip handles for more comfortable operation.3-1/4" deep throat clamps wide rails and stiles easily.Vise-grip style clamp action-squeeze to engage, trip to the lever to release.Adjustment knob dials out to handle stock up to 2-3/4" thick.

Pages: first pageprev page1 2 3 4 5next pagelast page