Products tagged with: domestic

Pages: 1

Cherry by the Piece-1/2" Thickness

Cherry by the Piece-1/2" Thickness
$9.99

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years. Full height is attained in about 100 years.Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance.Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.Luster: Rich and satiny. Odor: Emits a fruity aroma when cut.Steam Bending: Good. Often compared to Beech and Ash.

Cherry by the Piece-1/4" Thickness

Cherry by the Piece-1/4" Thickness
$4.99

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years. Full height is attained in about 100 years.Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance.Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.Luster: Rich and satiny. Odor: Emits a fruity aroma when cut.Steam Bending: Good. Often compared to Beech and Ash.

Cherry by the Piece-1/8" Thickness

Cherry by the Piece-1/8" Thickness
$4.99

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years. Full height is attained in about 100 years.Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance.Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.Luster: Rich and satiny. Odor: Emits a fruity aroma when cut.Steam Bending: Good. Often compared to Beech and Ash.

Cherry by the Piece-3/4" Thickness

Cherry by the Piece-3/4" Thickness
$9.99

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years. Full height is attained in about 100 years.Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance.Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.Luster: Rich and satiny. Odor: Emits a fruity aroma when cut.Steam Bending: Good. Often compared to Beech and Ash.

Curly Maple Sold by the Piece-1/2" Thickness

Curly Maple Sold by the Piece-1/2" Thickness
$10.99

This curly soft maple is highly figured with tiger-striped rays running perpendicular to the grain pattern. Along with the wood's light color, this striping lends a shimmering quality to the lumber. Even unfinished, the wood has a very pleasing interaction with light. It is no surprise, then, that curly maple has become a woodworker's favorite for accents, specialty furniture, musical instruments, and more.To make the figure in this curly maple really "pop", we recommend using an oil product (tung, linseed, etc.), as opposed to a stain. If a lacquer or urethane finish is necessary, adding a coat or two of clear wax-free shellac before the final finishing will ensure that the figure stands out.

Curly Maple Sold by the Piece-1/4" Thickness

Curly Maple Sold by the Piece-1/4" Thickness
$8.99

This curly soft maple is highly figured with tiger-striped rays running perpendicular to the grain pattern. Along with the wood's light color, this striping lends a shimmering quality to the lumber. Even unfinished, the wood has a very pleasing interaction with light. It is no surprise, then, that curly maple has become a woodworker's favorite for accents, specialty furniture, musical instruments, and more.To make the figure in this curly maple really "pop", we recommend using an oil product (tung, linseed, etc.), as opposed to a stain. If a lacquer or urethane finish is necessary, adding a coat or two of clear wax-free shellac before the final finishing will ensure that the figure stands out.

Curly Maple Sold by the Piece-1/8" Thickness

Curly Maple Sold by the Piece-1/8" Thickness
$7.99

This curly soft maple is highly figured with tiger-striped rays running perpendicular to the grain pattern. Along with the wood's light color, this striping lends a shimmering quality to the lumber. Even unfinished, the wood has a very pleasing interaction with light. It is no surprise, then, that curly maple has become a woodworker's favorite for accents, specialty furniture, musical instruments, and more.To make the figure in this curly maple really "pop", we recommend using an oil product (tung, linseed, etc.), as opposed to a stain. If a lacquer or urethane finish is necessary, adding a coat or two of clear wax-free shellac before the final finishing will ensure that the figure stands out.

Curly Maple Sold by the Piece-3/4" Thickness

Curly Maple Sold by the Piece-3/4" Thickness
$12.99

This curly soft maple is highly figured with tiger-striped rays running perpendicular to the grain pattern. Along with the wood's light color, this striping lends a shimmering quality to the lumber. Even unfinished, the wood has a very pleasing interaction with light. It is no surprise, then, that curly maple has become a woodworker's favorite for accents, specialty furniture, musical instruments, and more.To make the figure in this curly maple really "pop", we recommend using an oil product (tung, linseed, etc.), as opposed to a stain. If a lacquer or urethane finish is necessary, adding a coat or two of clear wax-free shellac before the final finishing will ensure that the figure stands out.

Maple by the Piece-1/2" Thickness

Maple by the Piece-1/2" Thickness
$8.99

The classic American blonde, Hard Maple features creamy white sapwood with a reddish cast, and rugged durability. The wood has an exceptionally fine, even texture, and tight pores that yield an excellent finished surface. These thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up!Tree: May reach a height of 70 to 120 feet, with a 24 to 36 inch diameter trunk. Sapwood Color: White with a reddish cast.Heartwood Color: Uniformly pale reddish brown or light tan. Grain: Usually fairly straight, but can also be curly or wavy. Sometimes exhibits decorative figuring like bird's eye, maple burl, blister, leaf, and fiddleback.Texture: Very fine and even.Working properties: Due to hardness, tools must be kept very sharp.Carving: Responds well to carving tools.Steam bending properties: Fair.Strength Properties: Very high bending strength. Resistance to compression parallel to the grain is high. Hardness is rated as medium. It is heavy, and resists denting and marring. Hard Maple can be up to 25 percent harder than Soft Maple.

Maple by the Piece-1/4" Thickness

Maple by the Piece-1/4" Thickness
$4.99

The classic American blonde, Hard Maple features creamy white sapwood with a reddish cast, and rugged durability. The wood has an exceptionally fine, even texture, and tight pores that yield an excellent finished surface. These thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up!Tree: May reach a height of 70 to 120 feet, with a 24 to 36 inch diameter trunk. Sapwood Color: White with a reddish cast.Heartwood Color: Uniformly pale reddish brown or light tan. Grain: Usually fairly straight, but can also be curly or wavy. Sometimes exhibits decorative figuring like bird's eye, maple burl, blister, leaf, and fiddleback.Texture: Very fine and even.Working properties: Due to hardness, tools must be kept very sharp.Carving: Responds well to carving tools.Steam bending properties: Fair.Strength Properties: Very high bending strength. Resistance to compression parallel to the grain is high. Hardness is rated as medium. It is heavy, and resists denting and marring. Hard Maple can be up to 25 percent harder than Soft Maple.

Maple by the Piece-1/8" Thickness

Maple by the Piece-1/8" Thickness
$4.99

The classic American blonde, Hard Maple features creamy white sapwood with a reddish cast, and rugged durability. The wood has an exceptionally fine, even texture, and tight pores that yield an excellent finished surface. These thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up!Tree: May reach a height of 70 to 120 feet, with a 24 to 36 inch diameter trunk. Sapwood Color: White with a reddish cast.Heartwood Color: Uniformly pale reddish brown or light tan. Grain: Usually fairly straight, but can also be curly or wavy. Sometimes exhibits decorative figuring like bird's eye, maple burl, blister, leaf, and fiddleback.Texture: Very fine and even.Working properties: Due to hardness, tools must be kept very sharp.Carving: Responds well to carving tools.Steam bending properties: Fair.Strength Properties: Very high bending strength. Resistance to compression parallel to the grain is high. Hardness is rated as medium. It is heavy, and resists denting and marring. Hard Maple can be up to 25 percent harder than Soft Maple.

Maple by the Piece-3/4" Thickness

Maple by the Piece-3/4" Thickness
$8.99

The classic American blonde, Hard Maple features creamy white sapwood with a reddish cast, and rugged durability. The wood has an exceptionally fine, even texture, and tight pores that yield an excellent finished surface. These thin boards are machined to 3/4" thickness, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up!Tree: May reach a height of 70 to 120 feet, with a 24 to 36 inch diameter trunk. Sapwood Color: White with a reddish cast.Heartwood Color: Uniformly pale reddish brown or light tan. Grain: Usually fairly straight, but can also be curly or wavy. Sometimes exhibits decorative figuring like bird's eye, maple burl, blister, leaf, and fiddleback.Texture: Very fine and even.Working properties: Due to hardness, tools must be kept very sharp.Carving: Responds well to carving tools.Steam bending properties: Fair.Strength Properties: Very high bending strength. Resistance to compression parallel to the grain is high. Hardness is rated as medium. It is heavy, and resists denting and marring. Hard Maple can be up to 25 percent harder than Soft Maple.

Spanish Cedar by the Piece

Spanish Cedar by the Piece
$23.99

Spanish Cedar is a lightweight, easily worked relative of Mahogany. Most widely known for its use in cigar boxes, it holds in moisture to create a natural humidor, and imparts its pleasant aroma to cigars. These thin boards are ideal for cigar boxes as well as any other decorative boxes. They are machined S4S to 1/4" thickness, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are also ideal for edging, veneering, inlay, marquetry, bending stock, bent laminations and whatever else your imagination can dream up!Pieces measure 1/4" x 5" x 48" Features:Tree: Cedrela trees may attain heights of 100 feet or more. The buttressed trees usually have trunks with diameters of 36 to 72 inches.Sapwood Color: The sapwood is pale and not sharply differentiated from the heartwood.Heartwood Color: Usually ranges from pale pinkish-brown to dark reddish-brown, darkening upon exposure.Grain: Generally straight or slightly interlocked.Texture: Moderately coarse.Luster: Varies from lustrous to very lustrous.Odor: Natural oils in the wood give off a distinctive fragrance.Movement: Dimensionally stable. Holds its shape very well after seasoning.Natural Durability: Heartwood has high natural resistance to decay. The sapwood is vulnerable to attack by powder-post beetles. Moderate to high resistance to termites.Working characteristics: Easily worked with both hand tools and machines.Strength Properties: Medium bending strength, much weaker than White oak or Teak. Resistance to compression parallel to grain is low. Surfaces may dent or scratch easily since the wood is soft. Weight and density are about average. Relative to weight, strength properties are generally high.

Walnut by the Piece-1/2" Thickness

Walnut by the Piece-1/2" Thickness
$7.99

With its gorgeous chocolate tone and easy workability, it's easy to see why Black Walnut is often regarded as the classic American cabinet wood. The heartwood varies from light grayish-brown to deep chocolate brown, occasionally approaching an almost black or purplish-brown. The grain is slightly open and usually straight, but is famous for its sometimes stunning figure. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations. Thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Tree: May attain a height of 70 to 90 feet, with a 24 to 48 inch diameter trunk. Texture: Usually coarse, but uniform. Luster: Somewhat dull, but develops a lustrous patina after many years in use. Odor: Emits a mild, sweet odor reminiscent of cocoa.Movement: Dimensionally stable after seasoning. Absorbs and releases moisture more slowly than most woods.Natural Durability: Resistance to insects and fungi is very good.Working characteristics: Works extremely well with hand tools.Steam Bending: Steam bends well. (Roughly 78% of steam bended pieces survive without cracking). Strength: The wood is strong and is able to withstand extra weight with little deflection or bending.

Walnut by the Piece-1/4" Thickness

Walnut by the Piece-1/4" Thickness
$4.99

With its gorgeous chocolate tone and easy workability, it's easy to see why Black Walnut is often regarded as the classic American cabinet wood. The heartwood varies from light grayish-brown to deep chocolate brown, occasionally approaching an almost black or purplish-brown. The grain is slightly open and usually straight, but is famous for its sometimes stunning figure. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations. Thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Tree: May attain a height of 70 to 90 feet, with a 24 to 48 inch diameter trunk. Texture: Usually coarse, but uniform. Luster: Somewhat dull, but develops a lustrous patina after many years in use. Odor: Emits a mild, sweet odor reminiscent of cocoa.Movement: Dimensionally stable after seasoning. Absorbs and releases moisture more slowly than most woods.Natural Durability: Resistance to insects and fungi is very good.Working characteristics: Works extremely well with hand tools.Steam Bending: Steam bends well. (Roughly 78% of steam bended pieces survive without cracking). Strength: The wood is strong and is able to withstand extra weight with little deflection or bending.

Walnut by the Piece-1/8" Thickness

Walnut by the Piece-1/8" Thickness
$4.99

With its gorgeous chocolate tone and easy workability, it's easy to see why Black Walnut is often regarded as the classic American cabinet wood. The heartwood varies from light grayish-brown to deep chocolate brown, occasionally approaching an almost black or purplish-brown. The grain is slightly open and usually straight, but is famous for its sometimes stunning figure. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations. Thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Tree: May attain a height of 70 to 90 feet, with a 24 to 48 inch diameter trunk. Texture: Usually coarse, but uniform. Luster: Somewhat dull, but develops a lustrous patina after many years in use. Odor: Emits a mild, sweet odor reminiscent of cocoa.Movement: Dimensionally stable after seasoning. Absorbs and releases moisture more slowly than most woods.Natural Durability: Resistance to insects and fungi is very good.Working characteristics: Works extremely well with hand tools.Steam Bending: Steam bends well. (Roughly 78% of steam bended pieces survive without cracking). Strength: The wood is strong and is able to withstand extra weight with little deflection or bending.

Walnut by the Piece-3/4" Thickness

Walnut by the Piece-3/4" Thickness
$8.49

With its gorgeous chocolate tone and easy workability, it's easy to see why Black Walnut is often regarded as the classic American cabinet wood. The heartwood varies from light grayish-brown to deep chocolate brown, occasionally approaching an almost black or purplish-brown. The grain is slightly open and usually straight, but is famous for its sometimes stunning figure. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations. Thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Tree: May attain a height of 70 to 90 feet, with a 24 to 48 inch diameter trunk. Texture: Usually coarse, but uniform. Luster: Somewhat dull, but develops a lustrous patina after many years in use. Odor: Emits a mild, sweet odor reminiscent of cocoa.Movement: Dimensionally stable after seasoning. Absorbs and releases moisture more slowly than most woods.Natural Durability: Resistance to insects and fungi is very good.Working characteristics: Works extremely well with hand tools.Steam Bending: Steam bends well. (Roughly 78% of steam bended pieces survive without cracking). Strength: The wood is strong and is able to withstand extra weight with little deflection or bending.

Pages: 1