Products tagged with: hardware fasteners exterior screws

Pages: 1

GRK Pheinox R4 Stainless Steel Screws

GRK Pheinox R4 Stainless Steel Screws
$11.99

Premium 305 stainless steel screws from GRK are the ultimate for corrosion-free outdoor performance, which is why they come with a lifetime warranty against rust and staining. Each screw features an underhead with saw-blade like cutting teeth and six self-contained cutting pockets, which transport drill dust away from the edge of the screw hole while cutting a perfectly clean hole. The screw head closes the hole off with precision, leaving no damaged fibers around the head. Because of the angle on the underside, the screw also fits perfectly into the pre-countersunk holes of hardware fittings such as hinges or locks.Technical Details:High grade 305 stainless steel screws.No pre-drilling unless material requires it.Self countersinking heads.Starhead recess / non-stripping heads.Can be used with fibrous materials.Robust threads.Works well in wood, particle board, plastic, sheet metal, cement fiberboard, composite decking, wood decking, and melamine.

GRK R4 Multipurpose Star/Torx Screw-#8 Torx Screws

GRK R4 Multipurpose Star/Torx Screw-#8 Torx Screws
$7.99

In addition to a Torx-head design that eliminates cam-out slippage, these innovative self-countersinking screws feature six cutting pockets beneath the head and sharp, saw-like lower threads to drive through a variety of materials smoothly, without tearing. Ideal for exterior purposes such as building a deck. Torx/Star-head driver bits also available.The R4 is a multi-purpose screw that can be used in all woodworking and plastic applications and is great for the following:WoodCement Fiber BoardParticle BoardComposite DeckingPlasticWood DeckingSheet MetalMelamineFeatures:R4 CLIMATEK coated screws are tested and approved for all exterior applications including pressure treated lumber as stated in the ICC report #ESR-2442.Sub-head cutters create clean countersunk holes without damaging the surface- even in brittle materials.Eliminates pre-drilling in most casesFits perfectly into existing countersunk holes on hinges and other hardware fittings.Screws 2" long or longer have special CEE thread that enlarges screw hole and improves performance.

GRK R4 Multipurpose Star/Torx Screw-#9 Torx Screws

GRK R4 Multipurpose Star/Torx Screw-#9 Torx Screws
$8.99

In addition to a Torx-head design that eliminates cam-out slippage, these innovative self-countersinkingbits feature six cutting pockets beneath the head and sharp, saw-like lower threads to drive through a variety of materials smoothly, without tearing. Ideal for exterior purposes such as building a deck. Available in several lengths and sizes. Torx/Star-head driver bits also available.The R4 is a multi-purpose screw that can be used in all woodworking and plasticapplications.Great for:WoodCement Fiber BoardParticle BoardComposite DeckingPlasticWood DeckingSheet MetalMelamineAdditional features:R4 CLIMATEK coated screws are tested and approved for all exterior applications including pressure treated lumber as stated in the ICC report #ESR-2442.Sub-head cutters create clean countersunk holes without damaging the surface- even in brittle materials.Eliminates pre-drilling in most casesFits perfectly into existing countersunk holes on hinges and other hardware fittings.Screws 2" long or longer have special CEE thread that enlarges screw hole andimproves performance.Made of case hardened steel for high tensile, torque and shear strength.

Kreg 675-Pc. Self-Tapping Pocket Hole Screw Kit

Kreg 675-Pc. Self-Tapping Pocket Hole Screw Kit
$29.99

Affordable, quality screw kit contains five of the most popular screw sizes for pocket hole joinery, and now comes in a new and improved case. Includes #6 x 1" pan-head fine (150), #7 x 1-1/4" washer-head fine (150), #8 x 2-1/2" washer-head coarse (75), #8 x 1-1/4" washer-head coarse (150), and #7 x 1" pan-head coarse (150). All screws feature a self-tapping tip and deep, #2 square drive recess.Kit contains 675 screws to tackle a wide variety of projects. The upgraded case is made with heavy-duty plastic and features a comfortable domed handle for easy transport. Use #6 x 1" pan-head fine thread screw when joining material to hardwood. For use in 1/2" thick stock.Use #7 x 1-1/4" washer-head fine thread screw when joining material to hardwood, such as hardwood face frames, attaching edge-banding, and cabinet walls to face frame. For use in 3/4" thick stock.Use #8 x 2-1/2" washer-head coarse thread screw in both hardwood and softer materials. With Sun-Seal weather-resistant coating to greatly prolong outdoor life. Ideal for 2x4 construction, decks and outdoor furniture. For use in 1-1/2" thick stock.Use #8 x 1-1/4" washer-head coarse thread screw when joining material to soft or composite material. Works great screwing cabinet partition to floor, nail rails to partition, corner blocks, and plywood to plywood. For use in 3/4" stock.Use #7 x 1" pan-head coarse thread screw when joining material to soft or composite material. Ideal for drawer boxes. For use in 1/2" thick stock.

Kreg Blue-Kote Pocket-Hole Screw Kit

Kreg Blue-Kote Pocket-Hole Screw Kit
$39.99

Carry this compact kit with you so you'll always have the pocket hole screw for every job! Includes some of Kreg's most popular weather-resistant Blue-Kote screws in a durable easy-to-carry case. All feature deep #2 square drives and a needle-point self-tapping tip.

Kreg Blue-Kote Weather Resistant Screws

Kreg Blue-Kote Weather Resistant Screws
$4.99

Ideal for outdoor garden and patio furniture, as well as for general exterior construction! Kreg's Blue-Kote screws have three chemically-combined anti-corrosion layers that give them up to 400% more weather resistance than zinc-plated screws.Self-tapping screw tips make for easy driving Case hardened steel won't bend or break Deep-seated #2 square drive heads eliminate "cam out," ensuring a tight, solid joint

Kreg Jig HD Screws-Kreg Jig HD Screws

Kreg Jig HD Screws-Kreg Jig HD Screws
$4.99

Kreg Jig HD Pocket Hole Screws are optimized for use with the Kreg Jig HD Heavy Duty Pocket Hole System (#46791, sold separately) and for stock 1-1/2" and larger. These large 2-1/2" long #14 hardened-steel screws boast incredible shear resistance and a Protec-Kote finish with 3 anti-corrosion layers for incredible long-term resistance to the effects of moisture. Choose from quantities of 30 or 125.Technical Details:Designed for use with the Kreg Jig HD Heavy Duty Pocket Hole System (#46791, sold separately).#3 square drive screw head also accepts Phillips head.2-1/2" long #14 screws.Hardened steel.Protec-Kote finish with 3 anti-corrosion layers ensures a long life in outdoor environment.

Kreg Protec-Kote Deck Screws

Kreg Protec-Kote Deck Screws
$49.99

A trio of anti-corrosion layers protect these screws from rust as they hold your deckboards in place. Recommended for use with ACQ treated lumber.Designed for theKreg Deck Jig System (36613, sold separately) with self-tapping tips and KTX squaredrive heads.

Kreg Protec-Kote Deck Screws-2-5/8" Length

Kreg Protec-Kote Deck Screws-2-5/8" Length
$11.99

A trio of anti-corrosion layers protect these screws from rust as they hold your deckboards in place. Recommended for use with ACQ treated lumber. Designed for theKreg Deck Jig System (36613, sold separately) with self-tapping tips and KTX square drive heads.

Kreg Stainless Steel Deck Screws

Kreg Stainless Steel Deck Screws
$17.99

These stainless steel screws are your best bet for long-term protection against corrosion in decking applications. A 10' x 20' deck with 16" on-center joists requires approximately 700 screws.Technical Details2" lengthSelf-tapping tipsFlat bottom heads won't split your workpieceKTX square drive heads reduce cam-outStainless steel offers ultimate resistance to the elementsBest Used With:Kreg Deck Jig System (36613)

Kreg Stainless Steel Washer Head Screws

Kreg Stainless Steel Washer Head Screws
$18.99

100% stainless steel pocket hole screws eliminate the risk of rust and corrosion to keep your garden and patio furniture together indefinitely, and look good doing it. These pocket screws boast all the features of standard Kreg screws. The self-tapping screw tips make for easy driving and the wide washer heads boast incredible holding power. Deep-seated #2 square drive heads eliminate "cam out", ensuring a tight, solid pocket joint and easy disassembly. Available in 1-1/4" and 2-1/2" lengths. Choose fine thread screws for hardwoods; coarse thread screws for soft woods and plywood.Technical Details: 100% stainless steel pocket screws.Self-tapping screw tips.Deep-seated #2 square drive heads.Stainless steel Kreg screws are available in fine thread for hardwoods; coarse thread for soft woods and plywood.

Trim Head Stainless Steel Square Drive Screws-Select Size

Trim Head Stainless Steel Square Drive Screws-Select Size
$8.99

Small 1/4" heads are perfect when you need a low profile look. Uses #1 driver. Stainless steel gives you complete confidence in corrosion resistance. 50 screws per bag.Optional Bin Boxes are available with your order.

Pages: 1