Products tagged with: hardware fasteners interior screws

Pages: 1 2 3next pagelast page

#8 Square Drive Lube Finished Screws-Number 8 Screws

#8 Square Drive Lube Finished Screws-Number 8 Screws
$4.49

Completely dry to the touch, the lube finish reduces friction for easier installation and protects the screws from surface rust. Square Drive allows freedom from slippage and marring. Requires #2 Square Driver.Sharp thread angle cuts into wood to prevent splitting. Screws resists pullout with threads that cut nearly perpendicular. Slight but strong body minimizes distortion of material. Sharp point digs in with pin point accuracy.Optional Bin Boxes are available with your order.

#8-10 x 7/8'' Plastic Wall Anchors with Screws

#8-10 x 7/8'' Plastic Wall Anchors with Screws
$1.49

Plastic drywall anchors, sometimes called screw anchors, are indispensable when fastening items to a section of wall where a stud is not conveniently located. First, a hole is drilled into the drywall, and the anchor is pushed into place. As the screw is driven into the anchor, it spreads out the plastic tines, which bite into the drywall for a firm hold. Includes screws.Technical Details:Includes #8-10 screws.Anchors are 7/8" long.Plastic.

5 x 5/8" Brass Plated Phillips Screws

5 x 5/8" Brass Plated Phillips Screws
$2.49

Perfect for hinges, catches, latches, etc., these Brass Plated Phillips Screws also have a nice finished look. Excellent for hardware replacement when the original screw strips out, breaks, or gets lost. 25 per pack.Optional Bin Boxes are available with your order.Technical DetailsPerfect for hinges, catches, latches, etc.Excellent for hardware replacement when the original screw strips out, breaks, or gets lostBrass plating provides a nice, finished look25 per pack

6 x 1/2" Brass Plated Phillips Screws

6 x 1/2" Brass Plated Phillips Screws
$1.99

Perfect for hinges, catches, latches, etc., these Brass Plated Phillips Screws also have a nice finished look. Excellent for hardware replacement when the original screw strips out, breaks, or gets lost. 25 per pack.Optional Bin Boxes are available with your order.Technical DetailsPerfect for hinges, catches, latches, etc.Excellent for hardware replacement when the original screw strips out, breaks, or gets lostBrass plating provides a nice, finished look25 per pack

Bear Claw Hanger with Anchors

Bear Claw Hanger with Anchors
$4.19

Hidden from view, the Bear Claw Hanger with Anchors holds up to 100 lbs. when used with the included Snap Skru Anchors or installed into a stud! The 1" double-headed screws are ideal for sawtooth hangers, keyholes, D-rings or wired art. The self-drilling tip doesn't require a pilot hole and installs easily using just a hand-held Phillips screwdriver. Perfect for hanging artwork, photographs, diplomas, and more in drywall, lath, plaster, or wood studs. Includes and two Snap Skru anchors.Technical Details: Holds up to 100 lbs. when used with the Snap Skru anchors or installed into a studDouble-headed 1" screws are self-drilling so installation doesn't require a pilot holeInstalls easily using a hand-held Phillip screwdriver Best used with simple mirror and picture hanging solutions using D-rings or wireWorks with drywall, lath, plaster, or wood studs1" actual screw length; 1-1/4" overall lengthTwo Snap Skru Anchors

Black #10 Powerhead Wood Screws, 50-Pack

Black #10 Powerhead Wood Screws, 50-Pack
$5.99

Put an end to screws that dive below the surface and leave an ugly chipped out hole—PowerHead screws feature a broad, flat head that simply won't pull through. The 9/16'' diameter head offers superior holding power and is perfectly sized for a FastCap screw cap. Plus, when used with an impact driver, the cutting nibs on the underside of the head shear away material till the head sits perfectly flush. 9/16'' diameter heads won't pull throughSelf-tapping tips#10 Screws

Decorative Hardware Screws

Decorative Hardware Screws
$2.99

The perfect screw choice for decorative purposes such as cabinet or door hardware. 100 count packsChoose from Nickel or Statuary Bronze Available in 1/2" or 3/4"

Drawer Front Adjustment Screws

Drawer Front Adjustment Screws
$6.99

Perfect for aligning drawer fronts. Attach the drawer front to drawer, tighten enough to keep in place. Close drawer, align accordingly. Oversized 1/2" diameter head allows movement around 5/16" adjusting hole. Square-x heads. Zinc finish.Type-17 point helps screw penetrate solid wood drawer fronts.With Lo Root thread design for substantial holding power and #2 Square-X heads.Uses #2 Square-Drive or phillips bits.Zinc finish.100 screws per pack.

Drawer Slide Mounting Screws Truss Head/Phillips

Drawer Slide Mounting Screws Truss Head/Phillips
$4.99

Attach ball bearing slides and catches and be sure they'll stay where they're supposed to with these Drawer Slide Mounting Screws! Features a truss head/Phillips that gives you non-slip fastening and Phillips for convenience. Comes in packs of 100Screw Size: #8 x 1/2"Screw Finish: BlackTechnical Details:For ball bearing slides and catches (roller and magnetic)Truss head/Phillips for non-slip fasteningComes in packs of 100

E-Z Ancor Wall Anchors with Screws, 2-Pack

E-Z Ancor Wall Anchors with Screws, 2-Pack
$1.99

Plastic drywall anchors, sometimes called screw anchors, are indispensable when fastening items to a section of wall where a stud is not conveniently located. EZ-Ancor makes the process even easier with it's self-drilling tip. Just use a #2 Phillips head screwdriver to install the anchor. As the screw is driven into the anchor, it spreads out the plastic tines, which bite into the drywall for a firm hold. Screws included.Technical Details:Self-drilling drywall anchors for the easiest installation.To install, screw the anchor into place with a #2 Phillips head screwdriver, then install your screw through the fixture and into the anchor.Note: Not recommended for ceiling usage, or in applications where vibration is an issue.

FastCap RocLoc Drywall Anchors with Screws

FastCap RocLoc Drywall Anchors with Screws
$11.99

When you can't find a stud, use a RocLoc anchor! FastCap RocLoc Wall Anchors install quickly and easily in 1/2" drywall, each anchor supporting up to 150 pounds. The RocLoc anchor resists shear stress and will not allow the load to slide. Just drill a 1/2" hole, push the anchor into place and use the included Powerhead screw to fasten your item to the wall. Pack of 10 anchors with screws.Technical Details:RocLoc Wall Anchors are designed to work with 1/2" drywall or sheetrock.RocLocs resist shear stress, and do not allow the load to slide.Easy installation - no fumbling with toggles or multiple steps.Does not destroy the drywall.Easily removable and reusable.Each RocLoc supports up to 150 pounds. (Results may vary according to age, condition and quality of the drywall.)Great for towel bars, curtain rods, shelving, mirrors, pictures and other household projects.

Hi-Lo Screws-Product Options

Hi-Lo Screws-Product Options
$5.49

No more stripped threads or pulling out on melamine or particleboard!Hi-Lo screws grab the materiel for increased holding power. Two sizes. Color- Black.25 per pack.Optional Bin Boxes are available with your order.

Hingemaster Truss Head Screws, #8 x 3/4''

Hingemaster Truss Head Screws, #8 x 3/4''
$5.99

The self-drilling tip on Deerwood's Hingemaster Truss Head Screws greatly reduce the risk of splitting when driving screws without a pilot hole. That time-saving benefit makes them a favorite of professional woodworkers. The large bearing surface of the screw head also helps eliminate pull-through, and makes the screws ideal for fastening brackets and hardware. The screws also feature a Recex Square-drive/Phillips combination head, which can be driven by either a square-drive or a phillips bit.Technical Details:Truss head with large bearing surface is ideal for fastening hardware and brackets.100 screws per pack#8 x 3/4" longSelf-drilling tipPhillips/Square-drive head

Hook Dowels (T506), Pack of 8

Hook Dowels (T506), Pack of 8
$4.99

These T506 Hook Dowels allow drawers with side-mount epoxy-coated or ball-bearing slides to be attached to the vertical supports of the QuikTray Rollout Shelf System. Package of 8 Hook Dowels, enough to mount two drawers.

Hook Dowels T508 - Pack of 8

Hook Dowels T508 - Pack of 8
$6.99

These T508 Hook Dowels allow drawers with concealed under-mount ball-bearing slides to be attached to the vertical supports of the QuikTray Rollout Shelf System. Package of 8 Hook Dowels, enough to mount two drawers.

Kreg Coarse Maxi-Loc- Square Drive-Washer Head- Pocket Hole Screws-#8 Screws

Kreg Coarse Maxi-Loc- Square Drive-Washer Head- Pocket Hole Screws-#8 Screws
$3.99

Now available with new zinc coating! These zinc coated screws are more durable and provide easy installation!Choose the right screws for the wood you're using. These Pocket Hole Screws, with their Maxi-Loc/Square Drive/Washer Heads, ensures that the screw will seat in the bottom of the pocket hole every time.Sold in packs of 50, 100, 250, 500 or new 1,000 packs.Washer head seats screw, preventing a crushed pocket & run through.For softwoods and particleboard, the coarse thread gives you the driving and holding you need, with a self-tapping wood auger tip.The square drive washer head properly seats the screw in the bottom of the pocket hole, preventing the head from crushing the pocket in softer woods and particle board.The auger points provide for easy installation and minimal splitting.The zinc finish reduces friction for easy installation and protects from rust.You just need a standard pocket hole step drill.Optional Bin Boxes are available with your order.

Kreg Fine Maxi-Loc- Square Drive-Washer Head- Pocket Hole Screws-#7 Screws

Kreg Fine Maxi-Loc- Square Drive-Washer Head- Pocket Hole Screws-#7 Screws
$4.49

Now available with new zinc coating! These zinc coated screws are more durable and provide easy installation!Choose the right screws for the wood you're using. These Pocket Hole Screws, with their Maxi-Loc/Square Drive/Washer Heads, ensures that the screw will seat in the bottom of the pocket hole every time.Sold in packs of 100, 500 or new 1,000 packs.Washer head seats screw, preventing a crushed pocket & run through.For hardwoods, choose this fine thread screw.The square drive washer head properly seats the screw in the bottom of the pocket hole, preventing the head from crushing the pocket in softer woods and particle board.The auger points provide for easy installation and minimal splitting.The zinc finish reduces friction for easy installation and protects from rust.You just need a standard pocket hole step drill.Optional Bin Boxes are available with your order.

Kreg Maxi-Loc Hi-Lo Threads

Kreg Maxi-Loc Hi-Lo Threads
$4.49

Dual thread design makes this an all-purpose screw for a variety of wood species.Self-tapping auger pointWasher head that seats flush with the bottom of the boring holeUses a #2 square drive

Pages: 1 2 3next pagelast page