Products tagged with: hardware

Pages: first pageprev page1 2 3 4 5 6 7 8 9 10next pagelast page

Baluster Fasteners, 2" Length (Pack of 20)

Baluster Fasteners, 2" Length (Pack of 20)
$8.99

Secure your balusters to your stairs and floor like they're set in cement! The 2" long Baluster Fasteners add strength while fastening balusters to stairs and floors. No glue is required and they will not loosen over time.

Baluster Fastening Kit with Driver

Baluster Fastening Kit with Driver
$12.99

Baluster fastening kit with driver adds strength when fastening balusters to stairs and floors. Requires no gluing. Includes aluminum self-threading drill driver and four 1/4" steel dowel screws. Pack of 20 steel dowel screws for baluster fastening also available. Fastens balusters to stairs and floors Adds strength Requires no glue Will not loosen over time Includes a driver, 4 baluster fasteners

Bear Claw Hanger Screws

Bear Claw Hanger Screws
$4.19

Hidden from view, the Bear Claw Hanger with Anchors holds up to 100 lbs. when installed into a stud, or up to 30 lbs. when used with an anchor (anchors not included)! The 1-1/4" double-headed screws work well with sawtooth hangers, keyholes, D-rings or wired art. The self-drilling tip doesn't require a pilot hole and installs easily using just a hand-held Phillips screwdriver. Perfect for hanging artwork, photographs, diplomas, and more in drywall, lath, plaster, or wood studs. Includes .Technical Details: Holds up to 100 lbs. when installed into a studHolds up to 30 lbs. when used with anchors (not included) in drywallDouble-headed 1-1/4" screws are self-drilling so installation doesn't require a pilot holeInstalls easily using a hand-held Phillip screwdriverBest used with simple mirror and picture hanging solutions using sawtooth hangers, keyholes, wired art, and D-ringsWorks with drywall, lath, plaster, or wood studs1" actual screw length; 1-1/4" overall length

Bear Claw Hanger with Anchors

Bear Claw Hanger with Anchors
$4.19

Hidden from view, the Bear Claw Hanger with Anchors holds up to 100 lbs. when used with the included Snap Skru Anchors or installed into a stud! The 1" double-headed screws are ideal for sawtooth hangers, keyholes, D-rings or wired art. The self-drilling tip doesn't require a pilot hole and installs easily using just a hand-held Phillips screwdriver. Perfect for hanging artwork, photographs, diplomas, and more in drywall, lath, plaster, or wood studs. Includes and two Snap Skru anchors.Technical Details: Holds up to 100 lbs. when used with the Snap Skru anchors or installed into a studDouble-headed 1" screws are self-drilling so installation doesn't require a pilot holeInstalls easily using a hand-held Phillip screwdriver Best used with simple mirror and picture hanging solutions using D-rings or wireWorks with drywall, lath, plaster, or wood studs1" actual screw length; 1-1/4" overall lengthTwo Snap Skru Anchors

Bear Claw Hanging Kit

Bear Claw Hanging Kit
$7.99

Hang framed artwork and photos quickly, easily, and always level with the Bear Claw Hanging Kit! Includes two locators for D-rings and sawtooth hangers, two locators for keyhole slots, and a level. Each piece makes it easy to correctly position your frame and mark your wall for easy installation. You also get 12 double-headed 1" anchorless screws which hold up to 100 lbs. in a stud or 30 lbs. in drywall.Technical Details: Makes it easier to hang artwork and photography, and other framed items quickly, easily, and level every timeLocators for D-rings, sawtooth hangers, and keyhole slots temporarily attach to your frame to transfer visual markers to your wallHandy level sits on your frame, allowing for accurate, level installationDouble-headed screws hold up to 100 lbs. when installed into a studDouble-headed 1" screws are self-drilling so installation doesn't require a pilot holeInstalls easily using a hand-held Phillip screwdriverBest used with simple mirror and picture hanging solutions using D-rings or wireWorks wit drywall, lath, plaster, or wood studs1" actual screw length; 1-1/4" overall length

Belwith Surface Face Mounted Hinge, Flush, P106-AC

Belwith Surface Face Mounted Hinge, Flush, P106-AC
$3.19

Finish: Antique CopperBase Material: SteelMachine Screw Thread Size: #8-32Screws are includedWarranty: Lifetime

Belwith Surface Face Mounted Hinge, Flush, P106-CB

Belwith Surface Face Mounted Hinge, Flush, P106-CB
$3.99

Dimensions: 3.44" L x 1.24" W x 0.33" HFinish: Colonial BlackBase Material: SteelScrews are includedWarranty: Lifetime

Belwith Surface Face Mounted Hinge, Flush, P148-AB

Belwith Surface Face Mounted Hinge, Flush, P148-AB
$3.03

Finish: Antique BrassBase Material: SteelMachine Screw Thread Size: #8-32Screws are includedWarranty: Lifetime

Belwith Surface Mounted Hinge, Flush, P139-3

Belwith Surface Mounted Hinge, Flush, P139-3
$2.31

Finish: Polished BrassBase Material: SteelMachine Screw Thread Size: #8-32Screws are includedWarranty: Lifetime

Black #10 Powerhead Wood Screws, 50-Pack

Black #10 Powerhead Wood Screws, 50-Pack
$5.99

Put an end to screws that dive below the surface and leave an ugly chipped out hole—PowerHead screws feature a broad, flat head that simply won't pull through. The 9/16'' diameter head offers superior holding power and is perfectly sized for a FastCap screw cap. Plus, when used with an impact driver, the cutting nibs on the underside of the head shear away material till the head sits perfectly flush. 9/16'' diameter heads won't pull throughSelf-tapping tips#10 Screws

Black Decorative 20'' Lighting Strip

Black Decorative 20'' Lighting Strip
$59.99

A soft accent for cabinets and shelves.A soft accent for cabinets and shelves.Includes self-adhesive pads for straight mounting or swiveling clips for angled mounting. Mounting brackets swivel. Also includes cord, roll switch and a permanent bulb strip that lasts approximately 40,000 hours.

Blum 100° Inset Clip Top 3-Way Hinges for Frameless Applications

Blum 100° Inset Clip Top 3-Way Hinges for Frameless Applications
$9.99

Maintain the beauty of your cabinetry with elegant concealed European hinges! These Blum 100° CLIP Hinges give you an affordable option for retrofitting old doors or new construction. Features 3-way adjustability.For added convenience, use the Hinge Cup Drilling Jig A (53833) with your drill press to get accurate 35mm holes at the proper depth every time!This hinge is compatible with the JIG IT Hinge Plate Template for Inset Door Hinges #56585 (Sold Separately) for faster, more precise installation.

Blum 100° Overlay Clip Top Hinges 1/2" - 3/4" Overlay for Face Frame Applications (Pair)

Blum 100° Overlay Clip Top Hinges 1/2" - 3/4" Overlay for Face Frame Applications (Pair)
$11.99

Maintain the beauty of your cabinetry with elegant concealed European hinges! These Blum 100° CLIP Hinges give you an affordable option for retrofitting old doors or new construction. (Sold in Pairs) This hinge is compatible with the JIG IT Hinge Plate Template D #57345 (Sold Separately) for faster, more precise installation.

Blum 100° Overlay Clip Top Hinges 3/8" - 5/8" Overlay for Face Frame Applications (Pair)

Blum 100° Overlay Clip Top Hinges 3/8" - 5/8" Overlay for Face Frame Applications (Pair)
$11.99

Maintain the beauty of your cabinetry with elegant concealed European hinges! These Blum 100° CLIP Hinges give you an affordable option for retrofitting old doors or new construction. (Sold in Pairs) This hinge is compatible with the JIG IT Hinge Plate Template D #57345 (Sold Separately) for faster, more precise installation.

Blum 110° Clip Top Cross - Corner Hinges

Blum 110° Clip Top Cross - Corner Hinges
$19.99

With Clip top hinges you can make all three hinge adustments - side-to-side, depth and height - without loosening the installation screws. See optional Blumotion Soft Close System for silent and cushioned door closure. This hinge is compatible with the JIG IT Hinge Plate Template A #50375 (Sold Separately) for faster, more precise installation. Note: Mount these hinges on standard end panels when installing 45° overlay cabinet doors.

Blum 110° Free Swinging Frameless Clip Top Inset Hinges, Pair

Blum 110° Free Swinging Frameless Clip Top Inset Hinges, Pair
$11.99

The new geometry on Blum's 110° Free-Swinging euro hinges makes them compatible with doors up to 1'' thick, and boring distances of 3-7mm from the edge of the door. As usual, these hinges feature easy 3-way adjustments, and they are compatible with the existing CLIP mounting plates and hinge arm cover caps (included). Free-swinging design is ideal for furniture applications where using a magnetic or other catch is desired. This hinge is compatible with the JIG IT Hinge Plate Template for Inset Door Hinges #56585 (Sold Separately) for faster, more precise installation.Features:New geometry for door thicknesses of up to 26mm (1'')New boring distance range of 3-7mm from the edge of the door Easy three-dimensional adjustmentsCompatible with existing CLIP mounting plates and hinge arm cover caps Features free-swinging functionality

Blum 110° Free Swinging Frameless Clip Top Overlay Hinges

Blum 110° Free Swinging Frameless Clip Top Overlay Hinges
$9.99

The new geometry on Blum's 110° Free-Swinging euro hinges makes them compatible with doors up to 1" thick, and boring distances of 3-7mm from the edge of the door. As usual, these hinges feature easy 3-way adjustments, and they are compatible with the existing CLIP mounting plates and hinge arm cover caps (included). Free-swinging design is ideal for furniture applications where using a magnetic or other catch is desired. Features:New geometry for door thicknesses of up to 26mm (1")New boring distance range of 3-7mm from the edge of the doorEasy three-dimensional adjustmentsCompatible with existing CLIP mounting plates and hinge arm cover capsRecommended for frameless cabinet applicationsFeaturing free-swing functionality

Blum 110° Soft-Close BLUMotion Clip Top Overlay Hinges for Frameless Cabinets

Blum 110° Soft-Close BLUMotion Clip Top Overlay Hinges for Frameless Cabinets
$17.99

Virtually invisible damping mechanism in the much-loved Clip Top hinge design. 3-way adjustability and clip-on ease of the original. Each hinge has a switch for turning the soft-close feature on or off. Smooth, whisper-soft closing action paired with an equally graceful appearance make the new BLUMotion hinges a standout for visual and tactile aesthetics. No more rattling glasses and banging cabinet doors and no bulky apparatus on the outside of the hinge. Switching off one hinge on smaller, lighter doors allows the same soft-close speed throughout your kitchen. Self-lubricating with a full 110° opening angle. Compatible with doors up to 1" thick. Hinges include sleek screw caps as well as hinge plates for various overlays. This hinge is compatible with the JIG IT Hinge Plate Template A #50375 (Sold Separately) for faster, more precise installation. If existing hole is less than 13mm deep, shims are available that allow retrofitting without reboring (sold separately, #35245). Angle restriction clips (sold separately, #31075) are also available to prevent doors from colliding with adjacent walls and cabinets when opened. Due to the new hinging action of the soft-close hinge, the original Clip Tops and Soft-Close Clip Tops may not be combined in the same door.

Pages: first pageprev page1 2 3 4 5 6 7 8 9 10next pagelast page