Products tagged with: home family
Install these jaws on your Oneway Scroll Chuck (22719, sold separately) or Talon Chuck (20761, sold separately) for turning small bowls, knobs, vases or spindles.Chucking capacities of the Oneway Scroll Chuck with #1 Jaws:External (compression): 3/8" minimum, 2" maximumInternal (expansion): 7/8" minimum, 2-1/2" maximumChucking capacities of the Oneway Talon Chuck with #1 Jaws:External (compression): 3/8" minimum, 1-3/4" maximumInternal (expansion): 7/8" minimum, 2-3/8" maximum
These jaws fit the Oneway Scroll Chuck (22719, sold separately) and Talon Chuck (20761, sold separately) and have the mass and size necessary for turning larger bowls and vases. They are unparalleled in strength and holding capacity. The #3 jaws have also been outfitted with Oneway's patented profiled jaw design.Chucking capacities of the Oneway Scroll Chuck with #3 Jaws:External (compression): 3-3/8" minimum, 4-3/4" maximumInternal (expansion): 3-7/8" minimum, 5-3/8" maximumChucking capacities of the Oneway Talon Chuck with #3 Jaws:External (compression): 2-7/8" minimum, 4" maximumInternal (expansion): 3-3/8" minimum, 4-5/8" maximum
The #3 Jaws for the beefy Oneway Stronghold Chuck (30589, sold separately) have the mass and size necessary for large bowls and vases. With their profiled jaws, they provide maximum gripping power with minimal damage to the piece.Chucking capacities of the Stronghold Chuck with #3 Jaws:External (compression): 3-7/8" minimum, 5-1/4" maximumInternal (expansion): 4-1/2" minimum, 6" maximumNote: If your lathe has less than a 16" swing, the Oneway Talon Chuck (20761) is recommended. Stronghold Chuck jaws are NOT compatible with either the original Oneway Chuck or the Talon Chuck.
#6 x 5/8" Flathead Zinc Screws designed for the Blum Low-Profile 3/4 Extension Drawer Slides.Pack of 400.
Completely dry to the touch, the lube finish reduces friction for easier installation and protects the screws from surface rust. Square Drive allows freedom from slippage and marring. Requires #2 Square Driver.Sharp thread angle cuts into wood to prevent splitting. Screws resists pullout with threads that cut nearly perpendicular. Slight but strong body minimizes distortion of material. Sharp point digs in with pin point accuracy.Optional Bin Boxes are available with your order.
Plastic drywall anchors, sometimes called screw anchors, are indispensable when fastening items to a section of wall where a stud is not conveniently located. First, a hole is drilled into the drywall, and the anchor is pushed into place. As the screw is driven into the anchor, it spreads out the plastic tines, which bite into the drywall for a firm hold. Includes screws.Technical Details:Includes #8-10 screws.Anchors are 7/8" long.Plastic.
Plate features an attachment that fits the standard T-Tracks on Contractor Clamps (sold separately) to firmly guide your router in a straight line along the clamp. The 6" diameter plate attaches easily to many popular routers for consistent and uniform performance.This Router plate is predrilled to fit the Porter Cable: 100, 690, 890 series, 8529Makita: 1100 series Hitachi: M12CV DeWalt: DW625, DW616, DW618 seriesBosch: 1617, 1618 series, 1619, 1619 EVS
Razor-sharp teeth quickly shave wood and leave a smooth edge without clogging or heat buildup. Rotary shapers have razor-sharp teeth that quickly shave wood without clogging or heat buildup.Creates shavings - not dust!Hardened stainless steel. 5/16" shank.Can be used at speeds up to 2500 RPM.Easy attachment to drill press.For use on wood, plastic and other non-metallic materials.Includes drum and steel blade.Replacement blades sold separately.Materials being fed into the shaper should be fed left of center to reduce kickback.Always wear safety goggles and gloves.Not for use with routers.Technical Details:Drill attachments measure 3-1/2" total height with shaftCutting blade height: 2-1/8"Fits 5/16" or larger chuckShaft Diameter: 5/16"Weight: 2 oz.Materials: Blades made of 400 series stainless steelRecommended 1000-2000 RPM, do not exceed 2500 RPM
These 1" 23-gauge fasteners are ideal for use with Porter-Cable's 1-3/8" Pin Nailer (41936, sold separately). Pack of 2,000.
If you want to enjoy the silky smooth finish of our Rockler Lathe Tool Rests, but you have a larger lathe with a 1'' I.D. holder, we've got you covered. This bushing slides over the 5/8'' post on any Rockler Lathe Tool Rest, making it compatible with 1'' holders. Use with the Rockler Lathe Tool Rest (e.g. 48674, sold separately)Made of black oxide coated steelIncludes two locking set screws