Products tagged with: home improvement
Much like felt pads, Slipstick Slider furniture glides protect your floors from scratches, and make rearranging furniture virtually effortless. Unlike felt pads, however, Slipstick Sliders won't wear out, collect dirt or dust, and scratch your floor when the felt shears off. Chocolate-colored rim with gray pads.Technical Details:Slipstick Sliders are ideal for dining chairs with leveled feet and light weight furniture.Glides easily without scratching floors.Includes option to attach with self-stick adhesive or screws.Recommended for legs from 1" to 1-1/4" in diameter.Protects hardwood, laminate and ceramic tile floors.
Create beautiful, fully finished picture frames in a matter of only minutes! Just make your miter cuts and assemble. Precut rabbet provides plenty of room for glass, matting and a photograph, or for an 1/8" canvas board. Solid wood core with a thick, smooth black wrap.Technical Details:Approximate dimensions: 1"W x 29/32" thick.Rabbet dimensions: 1/4" x 11/16".Profile: Gently convex face with rounded corners.Material: Softwood with black vinyl wrap.
This unique bit is similar to a locking rabbet bit, but it cuts two tongues instead of one for added mechanical strength and additional gluing surface. The wedged profile of the tongues helps everything snug up under clamping pressure, while still exposing valuable long grain gluing surface. To machine your parts, run the drawer fronts flat on the router table and the sides vertically against your fence. 1/4" shank.
Patterned from the original designs of Gustav and Leopold Stickley, this cast copper hardware has been re-issued by the Stickley Furniture Company exclusively for Rockler! Features hand-hammered texture of the originals and are finished to a warm, glowing patina.Knob measures 1-1/2" dia x 1-1/4" projection.Backplate measures 1-5/16" x 5-5/16".Cast copper.Includes mounting hardware.
After finishing, these mushroom shaped knobs will surely complement the appearance of your doors and drawers.Attractive unfinished mushroom shaped knobs that can be stained, finished or painted as desired. 1-1/2" diameter x 1-1/16" projection. Available in pine, oak, or cherry.
Hard Maple Spindles, smoothly sanded and ready for finishing. Use on plate rails, spice racks, and headboards. 8 per pack. Spindles measures 1-1/2" high (not including tenon), and 9/16" in diameter at widest point. Tenon is 3/8" in diameter.
These mixed hardwood stretchers are perfectly dimensioned for use with our Power Tool Mobile Base Hardware (92051, sold separately). Just cut to whatever length you need for your particular power tool. Economically priced, they're also well suited for other practical uses around the shop such as jigs, fixtures and shop stands. Each stretcher measures 1-1/2'' x 1-1/2'' x 43''Species will varySold singly
Designed for sanding and grinding irregular shapes, contours and hard-to-reach areas, these sanding drums are made from premium double resin bonded aluminum oxide abrasives. Just chuck the sanding drum into your drill and get to work. They are ideal for use on wood, metal, fiberglass and painted surfaces. Includes one sanding drum with six sanding sleeves: (2) fine, (2) medium and (2) coarse.
Once you get the technique down, using a foam brush yields fantastic results for an incredibly low price. You'll never have to pick bristles out of your finish, and the brushes are disposable so you can skip cleanup entirely. Unlike the cheapies, these foam brushes have a wooden handle and a plastic tang inside the brush to provide rigidity. At 1-1/2'' wide, they are great for sash work, raised panel doors and other detailed areas. Wood handle measures 4'' longFoam section is 1-1/2''W x 3''LFoam brush tip: To eliminate bubbles, don't rake the brush against the rim of the can—flick it lightly to remove excess finish
Once you get the technique down, using a foam brush yields fantastic results for an incredibly low price. You'll never have to pick bristles out of your finish, and the brushes are disposable so you can skip cleanup entirely. Unlike the cheapies, these foam brushes have a wooden handle and a plastic tang inside the brush to provide rigidity. At 1-1/2'' wide, they are great for sash work, raised panel doors and other detailed areas. Wood handle measures 4'' longFoam section is 1-1/2''W x 3''LFoam brush tip: To eliminate bubbles, don't rake the brush against the rim of the can—flick it lightly to remove excess finishPack of 10
QuikTray allows you to easily add roll out shelves, even better this solution is easily adjustable, easy to install and durable. You can install up to 3 drawer shelves and can easily change the vertical location of shelves by simply moving the drawer slides along the vertical supports (pilasters). Pull out shelves / drawers allow you to not only organize your storage space better but it allows you to easily remove the shelves without using any tools. This tool-free ease can be used with a wide variety of drawer slides that are side-mount or concealed (undermount). These slides can be ball-bearing or European style. QuikTrays are ideal for holding pull-out shelves in the kitchen, bathroom, laundry room, workshop and garage. These pilasters come in tan and white allowing you to match the rest of your room's theme. How They Work The QuikTray shelf system includes the vertical supports (pilasters) that attach directly into the cabinet. Once installed you can use hook dowels to connect your drawer slides to the pilasters. These hook dowels allow you to adjust the location of the slides without tools. That ease to simply pop slides in and out of the support makes installation easy and reduces errors that can result by traditional drawer slide instillation. This ease of use doesn't reduce durability and each shelf can hold up to 75lbs. Drawer Slides and shelves are sold separately! Suggestions Depending on your slide choices you might find you need additional hook dowels, we suggest T-508 hook dowels for concealed drawer slides and T-506 hook dowels for side-mount drawer slides. We also suggest using Blum Low-Profile ¾ Extension drawer slides.
Recommended for the initial turning of uneven or square stock to round.Recommended for the initial turning of uneven or square stock to round. The shape of the roughing-out gouge enables the tool to cut safely with the wings (the name given to the tips of the side walls) well back from the workpiece. Not for use on bowl grain projects.
Allows you to mount a Oneway Scroll Chuck (22719, sold separately) or Talon Chuck (20761, sold separately) to a lathe with a 1-1/4" x 8 TPI drive spindle.
Whether you're a hobbyist or a professional woodworker, Rockler's 1-1/4'' Louver Shutter Template Set makes building your own Plantation-style Shutters easy and affordable. Build fixed louver styles and save up to 75% over the cost of custom ordered shutters! It couldn't be easier with exclusive Rockler jigs, hardware, and pre-shaped louvers.Plus, with our online Shutter Design Wizard, you'll get a FREE Downloadable Plan for creating custom shutters, complete with detailed technical drawings, cross-section diagrams, elevations, and lists of all the supplies you need to complete your project! Before entering your dimensions into the design wizard, consult the Measuring Guide to determine your final shutter panel dimensions.Features:Easy, do-it-yourself jig/template for creating fixed traditional-style shuttersSave up to 75% over the cost of custom ordered shuttersJig makes it a fool-proof process for routing louver holesIncludes a 9/32" ID x 3/8" OD guide bushing for routing louver holes
Use this Flex-Blade Putty Knife to fill nail holes and other common defects in wood and other materials. The blade is flexible so you can achieve a low angle to the surface, resulting in a nicely filled hole with minimal cleanup required. Flexible blade is riveted to handleFull tang constructionWood handle for comfort and durability1-1/4'' wide blade