Products tagged with: improvement

Pages: first pageprev page1 2 3 4 5 6 7 8 9 10next pagelast page

1/2" Accessory Kit (Guide Block, Drill Bit and Shim Set)

1/2" Accessory Kit (Guide Block, Drill Bit and Shim Set)
$26.99

1/2" Accessory Kit for the Beadlock Kit (34802) include corresponding guide block, HSS drill bit and shim set.

1/2" Corrugated Fasteners (approx. 1000)

1/2" Corrugated Fasteners (approx. 1000)
$18.99

Corrugated fasteners work in hard and soft woods to draw joints together and offer twice the strength of regular fasteners. 1/2" Corrugated Fasteners for use with Corrugated Fastener Tool.

1/2" Plug Cutter

1/2" Plug Cutter
$14.99

Unique spring-loaded self-centering tip guides cutter and prevents walking to cut a smooth, tapered plug for 1/2" holes every time!Technical Details:1/4" quick shank prevents tool from slipping in drill chuck.Works with all 3/8" and 1/2" drive drill presses and handheld drills.Hardened steel for long life.Also available as part of a 3-piece set (39817, sold separately) that includes 5/16", 3/8" and 1/2" cutters.

1/2" Porter-Cable Pin Nails 23 Gauge (2000 per Pack)

1/2" Porter-Cable Pin Nails 23 Gauge (2000 per Pack)
$8.99

These 1/2" 23-gauge fasteners are ideal for use with Porter-Cable's 1-3/8" Pin Nailer (41936, sold separately). Pack of 2,000.

1/2" Power Twist Plus Link V-Belt

1/2" Power Twist Plus Link V-Belt
$11.99

The Power Twist Plus Link Belt is a high-performance V-belt that reduces vibration on table saws, drill presses, and other power tools by as much as 35%. It replaces the standard 1/2" V-belt on most machines, and the length can be adjusted by removing links. Whereas traditional drive belts can stretch and become misshapen (creating vibration as they rotate), the Power Twist belt is made up of interlocking segments of polyurethane elastomer and multiple plies of polyester fabric that retain their original shape, thereby reducing vibration. What's more, you can easily add or subtract links to get optimal tension on almost any machine!Technical Details:1/2" wide.Replaces the standard 1/2" V-belt on most machinesCan be adjusted by removing linksMade of interlocking segments of polyurethane elastomer and multiple plies of polyester fabricHigh-performance V-belt reduces vibrationSold by the foot.

1/2" Tenon-Lok Dovetail Drill Bit

1/2" Tenon-Lok Dovetail Drill Bit
$25.99

Avoid the possibility of joint failure in your chairs, stools or log furniture with this clever expanding cutter and wedge ring system. The high-speed steel Tenon-Lok cutter features spring-action blades that flare out at the base, creating a dovetail-shaped round mortise. The sharpened tapered steel wedge ring then sits in the flared mortise, expanding the tenon with minimal splitting as it gets driven into place. The resulting joint will never come apart and is completely immune to weather-related expansion and contraction. Ideal for repairs or original construction, the Tenon-Lok system requires both a cutter and a matching wedge ring (sold here in convenient multi-packs). Every Tenon-Lok cutter includes a steel setter guide to create an impression on the base of the mortise for the wedge ring to rest in.Using the 1/2" Tenon-Lok Dovetail Drill Bit:1. Drill a standard 1/2" round mortise with a forstner bit or another bit of your choice.2. Chuck the 1/2" Tenon-Lok cutting tool in your drill.3. Before starting the drill, position the Tenon-Lok cutter all the way at the bottom of the mortise.4. Start drilling at a low RPM and push hard enough to extend the cutter's spring-loaded dovetailing blades. Let the drill come to a complete stop before removing the cutter from the mortise.5. On a flat surface, place the setter guide over the ring with the sharp edges up. Fit tenon into guide and tap with mallet just enough to start the ring into the end of the tenon. Now you can proceed with installing the tenon into the mortise. Either clamp the joint together or use a mallet, causing the metal ring to seat itself into the tenon, expanding it for a permanent joint.

1/2" V-Nail 400 Pack

1/2" V-Nail 400 Pack
$20.99

V-nails for use with the Logan F300-1 Studio Picture Frame Joiner (44902, sold separately) or the PushMaster Picture Frame Joiner Kit (34957, sold separately). Pack of 400. As a general rule, choose a V-nail that's about 50-60% of the molding height.

1/2" V-Nail, 400 Pack for Hardwood

1/2" V-Nail, 400 Pack for Hardwood
$18.99

Package of 400 1/2" V-nails for creating tight joints in hardwood picture frames with the PushMaster Picture Frame Joiner Kit (34957, sold separately). As a general rule, choose a V-nail that's about 50-60% of the molding height.

1/2'' to 8mm Collet Adapter

1/2'' to 8mm Collet Adapter
$8.99

This collet reducer allows you to use 8mm shank router bits with your 1/2" collet. The collet adapter slips into your existing 1/2" collet, and the router bit is then inserted into the adapter. The expansion slot ensures a tight grip on the router bit shank. With the ability to use 8mm shank router bits, you'll have access to a wider bit selection. 8mm shanks are also slightly thicker than 1/4" shanks, for better stability.Technical Details:Sleeve reduces the size of your router collet from 1/2" to 8mm.Allows you access to a wider selection of router bits.Expansion slot for a tight grip on the shank.Precision-machined steel.Measures 1/2" diameter x 1" long.

1/4" Corrugated Fasteners (approx. 1,000)

1/4" Corrugated Fasteners (approx. 1,000)
$16.99

1/4" fasteners for use with the Excelsior Pneumatic Corrugated Fastener Tool (31166, sold separately). Approximately 1,000 per package.

1/4" Pro Shelf Drilling Bit

1/4" Pro Shelf Drilling Bit
$16.99

Save time and eliminate the possibility of misaligned shelves. Paired with the easy-to-use Pro Shelf Drilling Jig, the 1/4'' Pro Shelf Drilling Bit provides uniform pin holes.

1/4" Shelf Pin Supports

1/4" Shelf Pin Supports
$4.99

These 1/4" pin supports for adjustable shelving in wood cabinets. Pin supports and optional sleeves (sold separately) both come in packs of 16.Use these shelf supports for adjustable shelving in wood cabinetsPin Supports have a spoon (paddle) design with a 1/4" diameter shaft Tenon length of pin support is 11/32"; overall pin length is 13/16".These supports with or without sleeves are perfect for use with JIG IT shelf drilling system - sold separately.

1/4" Shelf Supports

1/4" Shelf Supports
$5.99

1/4" shelf supports. Rubber cushions also available. These 1/4" shelf supports come in nickel, brass, or antique brass finish. Sold in packs of 16. Use rubber cushions to reduce slippage (sold separately). Available in packs of 16.

1/4" V-Nail 400 Pack

1/4" V-Nail 400 Pack
$20.99

V-nails for the Logan F300-1 Studio Picture Frame Joiner (44902, sold separately) or the PushMaster Picture Frame Joiner Kit (34957, sold separately). Pack of 400. As a general rule, choose a V-nail that's about 50-60% of the molding height.

1/4" V-Nail, 400 Pack for Hardwood

1/4" V-Nail, 400 Pack for Hardwood
$19.99

Package of 400 1/4" V-nails for creating tight joints in hardwood picture frames with the PushMaster Picture Frame Joiner Kit (34957, sold separately). As a general rule, choose a V-nail that's about 50-60% of the molding height.

1/4'' Collet Reducer for Musclechuck Quick-Change Router Chuck

1/4'' Collet Reducer for Musclechuck Quick-Change Router Chuck
$34.99

This collet reducer slips into the Quick-Change Musclechucks #43849, #47222 (Sold Separately) to accommodate router bits with a 1/4'' shank. Without the reducer the Musclechuck only accepts 1/2'' shank router bits, so this reducer allows for a wider use of bits. This cam free reducer means that there is no damage to the router bit shank and no slipping.

1/4'' to 1/8'' Collet Reducer

1/4'' to 1/8'' Collet Reducer
$8.99

This collet reducer lets you use a wide array of 1/8'' shank router bits and cutters in any router with a standard 1/4'' collet. An 1/8'' shank is a common size on specialty ''miniature'' router bit sets, so this is the perfect accessory for highly detailed work. Reduces standard 1/4'' router collet to 1/8''Compression slot provides a tight grip on the bit/cutter

1/4'' to 4 mm Collet Reducer for Click-N-Carve Bits

1/4'' to 4 mm Collet Reducer for Click-N-Carve Bits
$6.99

This unique collet reducer lets you to use the wide array of proprietary Click-N-Carve CNC Router Bits with the larger CNC Shark line of routers, as well as any other CNC router or handheld router with a 1/4" collet. It reduces the collet opening from 1/4" to 4mm to accept the smaller Click-N-Carve shank. The Click-N-Carve selection offers many unique router bits, including Ball Nose Bits, End Mill Bits, Conical Ball Bits, and Half-Conical Bits for CNC Carving Machines.Technical Details:Collet reduces your standard 1/4" collet to a 4mm collet, which accepts the unique Click-N-Carve router bit shanks.Compression slots in collet reducer allow for tight fit when the collet is tightened.

Pages: first pageprev page1 2 3 4 5 6 7 8 9 10next pagelast page