Products tagged with: legs and parts

Pages: 1 2next pagelast page

18'' x 36'' Adjustable Workbench Stand

18'' x 36'' Adjustable Workbench Stand
$147.87

Add an inexpensive, heavy-duty work stand to your shop with this Rockler exclusive! This 32"H x 18"W x 36"L Adjustable Multi-Function Shop Stand is ideal to use when building a heavy duty workbench, assembly station or tool stand for your bench top tools. Includes a set of four 32" shop stand legs, four 18" stretchers, and four 36" stretchers!Looking for a different size? Our innovative, universal design lets you build up to 15 different sizes of shop stands.OPTIONAL ACCESSORIES:

Adjustable Height Work Station

Adjustable Height Work Station
$799.99

This work station base features a hydraulic-assisted lift that makes adjusting the height as easy as winding a crank. Lower it down to 26-1/2'' so you can sit down while you work, or raise it as high as 42'' to bring detail work up to eye level. The 500 lb. capacity makes it great for heavy items, and for heavy work like chopping mortises and dovetails. Easy height adjustments mean you get multiple uses out of the same amount of floor space. The same work table can be a desk, a drafting table or a workbench. Lower height settings work great for assembling cabinets and furniture while standing. Attach casters and roll it around as a handy infeed or outfeed table for nearly any power tool. Anyone can use it regardless of their height or if they use a wheelchair. Even one inch of height adjustment can make sanding, chiseling and pounding far more comfortable for your body, back and feet. Find out how comfortable woodworking can be with your work positioned at the perfect height. Infinitely adjustable between 26-1/2'' and 42'' high for maximum ergonomic efficiency and comfortHydraulically assisted hand crank for effortless adjustmentsCantilevered ''trestle leg'' design provides plenty of knee space when working in the seated positionHeavy-duty 14 gauge welded tubular steel frame is powder-coated and secured with mechanically interlocking extruded rails500-pound weight capacity (minus the weight of the top you select)Optional casters (34000, sold separately) are available for mobilityWorkbench top is not included-use any of our ready-made tops (e.g. 46654, 45996 or 25541, sold separately) or make your own up to 30''W x 60''LFor optimum lift performance, heavy loads should be centeredManufactured in the USA

Adjustable Multi-Function Shop Stand Legs

Adjustable Multi-Function Shop Stand Legs
$64.99

Adjustable Multi-Function Shop Stand Legs are heavy-duty 1/8'' steel to support any shop application. With 4'' x 1/2'' heavy-duty adjustable leveler for various height settings. Includes four 32'' legs and all mounting hardware (carriage bolts and nuts).For complete stand components: Rockler Customizable Shop Stand

Adjustable Multi-Function Shop Stand Stretchers

Adjustable Multi-Function Shop Stand Stretchers
$29.99

Available in four sizes: 18'', 24'', 36'', 48'' and 60''. Each size includes four stretchers. Top stretchers can be mounted flush with top or 4" down to add drawer or woodworking vice. Maximum stand size is 60" x 60".For complete stand components: Rockler Customizable Shop Stand

Centipede Sawhorse

Centipede Sawhorse
$89.99

What if we told you that you could spread out your hands and a work table would appear in front of your eyes? We had to see it to believe it, so click on the video to see for yourself. Now what if we told you that the work table, which weighs only 12 pounds, could support up to 1500 pounds? That's something we had to feel to believe, and if you press down on the expanded Centipede Sawhorse, you'll feel that there is no give whatsoever. So what can it do? Everything that a set of sawhorses and a work table can do-plus more-in a lightweight package that slips into a slim zippered bag. With six points of contact, you can lay down a sheet of plywood to create a table, or slip a couple of 2x4s into the included X-Cups to create two sawhorses. The X-cups can be moved from post to post and pivoted for angled cuts and for different sized workpieces. The system works fantastically with the various precision track saw systems on the market. Also included is a set of Quick Clamps, which slip into the polymer tops to hold your worktop or your material in place for cutting. Thanks to the deep valleys between the vertical posts, there is no risk of your saw blade or router bit hitting the Centipede supports. And in the unlikely event that you do nick one of the polymer tops (called P-Tops) your blade will not be damaged. It's not magic-it's just good engineering. Try it out and see for yourself! Collapsible work table folds down into a compact, lightweight unit for easy transport and convenient storageNo assembly required-everMultiple steel struts rest directly between the load and the ground to support an incredible amount of weight while supporting even the thinnest sheet materials with minimal saggingDurable, non-marring polymer P-Tops atop each post protect your cutting blades and the steel struts of the Centipede SawhorseEach P-Top spins 360° so the included Quick Clamps can be positioned to hold materials in placeQuick Clamps work just like traditional holdfasts-simply press down and the spring tension holds your materials in placeIncluded X-Cups cradle standard 2x4s for use as sawhorsesEach kit comes in a rugged canvas carrying/storage bag with zippered closure and room for extras

DeWalt DW7350 Planer Stand with Integral Mobile Base

DeWalt DW7350 Planer Stand with Integral Mobile Base
$179.99

Built from tough, heavy gauge steel brackets, the DW7350 Planer Stand from DeWalt is capable of supporting even the heaviest benchtop planers. Its medium-density fiberboard top is predrilled for easy installation of any DeWalt planer, and can be easily drilled for other planers as well. Best of all, mobility comes built-in with the integral mobile case and casters. Simply use the foot pedal to lower the stand firmly to the ground, or raise it up to be rolled away. Durable and stable even under heavy loadsEasy mobility for compact storage and working on the jobsiteIncludes mobile base, stand, hardware, MDF top and metal shelfMeasures approximately 21''W x 27''L x 29-1/2''H

Drawer Mounting Kits for Multi-Function Shop Stand-Drawer Mounting Kits

Drawer Mounting Kits for Multi-Function Shop Stand-Drawer Mounting Kits
$31.99

NOTE: Pictured shop stand is sold separately. With these handy Drawer Mounting Kits and enough Slide Brackets, you can turn the space beneath your Rockler Shop Stands into a full bank of neatly organized drawers or pullouts. Forget stooping down to rummage through a vast pile of dusty tools-now you can simply slide open a drawer to reveal an easily accessible assortment. The vertical holes are spaced 1-1/4" (32mm) apart. The Shop Stand Drawer Kits are pre-drilled to fit 32" high Rockler Adjustable Multi-Function Shop Stands.In order to construct a Rockler Multi-Function Shop Stand with Drawers, you will need the following:Drawer Mounting Kit: Available in either 18" or 24" depth. Each Drawer Mounting Kit includes 4 Vertical Corner Brackets, 2 Horizontal Slide Brackets and mounting hardware (enough to install one drawer)Optional Slide Bracket Kit: Available in either 18" or 24" depth. One kit per additional drawer. Rockler Multi-Function Shop Stand: One set of 32" Shop Stand Legs (height), one set of either 18" or 24" Stand Stretchers (depth), and one set of 12", 18", 24", 36", or 48" Stand Stretchers (width).Drawer Slides: For 18" depth drawers, use 16" slides. For 24" depth drawers, use 22" slides. Hafele Drawer Side and Slide Kits: For durable, smooth-rolling drawers in hardly any time at all, try Hafele's Metal Drawer Box System. These epoxy-coated metal drawer sides practically eliminate the time it would take to construct a wooden drawer box, and the drawer slides are integrated into them. Quantity depends on how many drawers you will be adding to the shop stand.Technical Details:The Shop Stand Drawer Kits will NOT fit 28" high Shop Stands.18" Slide Brackets are designed for 16" drawer slides.24" Slide Brackets are designed for 22" drawer slides.Vertical Corner Brackets are pre-drilled with a spacing of 1-1/4" (32mm).Allows you to install pullouts or drawers-the choice is yours.Instructions and all hardware are included. The Slide Brackets are pre-drilled to fit most epoxy-coated, ball-bearing, and metal-sided drawer slides. Optional Satin Nickel 6" Drawer Pull: Quantity depends on number of drawers.

Dust-Free Shop Tray, 5'' x 18'' x 1''

Dust-Free Shop Tray, 5'' x 18'' x 1''
$20.99

You'll keep tools and accessories right where you need them with this Dust-Free Shop Tray! This rugged galvanized steel rack has a mesh bottom designed to hold your router tools, bits, wrenches, tape measures, and pencils ... anything except dust and debris which falls through the mesh bottom. Includes two sets of pre-drilled mounting holes, one set is 16"-on-center (3/8" diameter hang slot), the other (3/16" H x 3/8" W oval) set fits any of our 18" deep Steel Shop Stands, including our Router Table Steel Stand. Made in USA.Technical Details: Ruggedly built out of galvanized steel Convenient storage for router tool bits, wrenches, tape measures, and pencils Mesh bottom holds tools but not dust or debris Includes two sets of pre-drilled mounting holes, one set is 16"-on-center (3/8" diameter hang slot), the other (3/16" H x 3/8" W oval) set fits any of our 18" deep Steel Shop Stands, including our Router Table Steel Stand. Measures 5" x 18" x 1" high Made in USA

Kreg Klamp Table KKS1000

Kreg Klamp Table KKS1000
$249.00

Get perfectly flush pocket hole joints and square frames with this innovative assembly table. Simply slide your parts against the stops, clamp in place and drive your screws! Aluminum Klamp Trak features a channel that accepts sliding Klamp Block stops and Bench Klamps (Klamp Table includes 2 Bench Klamps). Adjustable Klamp Blocks quickly square up your frame, position the pieces and center the joint line beneath the Bench Klamp clamping pad. The Bench Klamps rotate 360° for easy positioning from any point on the track. Spacious 21-3/4" x 33-3/4" work surface is coated with glue-resistant melamine for non-stick clamping and easy clean-up. Combine with the Kreg Universal Steel Stand for a sturdy work station/clamping system (sold separately).Technical Details:Klamp Blocks can be flipped and rotated for four different stock widths: 1-1/2", 2", 2-1/2" and 3".Bench Klamps swivel 360° for intermediate widths.Klamp Blocks are notched so dust slides underneath, allowing perfect positioning every time.Aluminum Klamp Traks are lightweight with a durable anodized finish.Table edging holds up to the inevitable bumps and bruises.Melamine work surface sheds glue easily. Simply let dry and scrape it away with a putty knife.Includes table, one 21-3/4" Klamp Trak, one 33-3/4" Klamp Trak and five Klamp Blocks.Klamp Table includes two Bench Klamps

Kreg Multi-Purpose Shop Stand

Kreg Multi-Purpose Shop Stand
$149.00

Kreg's Multi-Purpose Shop Stand is built to last from heavy 12- and 16-gauge steel and can be adjusted from 29'' to 35'' in height. This allows you to adjust the stand to your preferred working height or to the tasks it will be used for. It comes equipped with levelers to compensate for uneven floors. Predrilled holes make it easy to mount a cabinet enclosure and other accessories to customize the stand. The stand makes an ideal foundation for the Kreg Precision Router Table Top, as well as a variety of clamping tables and work tables. Heavy 12- & 16-gauge steel constructionAdjustable in height from 29" to 35"Includes (4) stable leveling feetDurable powder-coated finishFast, easy assembly

Maple Hardwood Tops

Maple Hardwood Tops
$209.99

Customize your work surfaces with these beautiful solid hardwood butcher-block tops. They are specially designed to fit our most popular shop stand sizes for gorgeous and practical workbenches, assembly tables, sanding stations, power tool stands and more. Use them to make your own workbenches and shop stands in no time. These tops are great for kitchens and craft tables as well! Standard shop size (26" x 38") is designed to provide a 1" overhang. All tops are 1-3/4" thick and come ready to finish.

Rockler 18'' Shop Stand Apron

Rockler 18'' Shop Stand Apron
$24.99

With 33 pockets, pouches and slots of various sizes, the Rockler 18'' Shop Stand Apron is capable of keeping a wide variety of tools and fasteners conveniently within arm's reach of your workstation. The tool organizer features pre-installed grommets for easy attachment to the 18'' side of any Rockler Shop Stand (e.g. 47502), Rockler Router Table Stand (48426), or to the wall. If you have casters on your stand, you can freely move it around without worrying about items falling out or shifting around—the pockets keep everything neatly in place. Made from a durable polyester weaveFour reinforced steel grommets enable easy mounting to your bench, router table, Rockler Shop Stand (e.g. 47502, sold separately), or the wallBacker board inserted for rigidityMeasures 18''W x 28-1/4'' overall

Rockler 28'' x 40'' Table Top

Rockler 28'' x 40'' Table Top
$99.99

This top is made of solid MDF for stability and flatness, and coated with melamine so it won't mar your parts, and sheds glue easily. It's generously dimensioned at 28" x 40", and works well for a general-purpose work table, a sanding station, or an assembly table. It also works well as a table top for the Shark line of CNC routers. Pair it with your own shop-built base cabinet, or with our 24"W x 36"L Shop Stand (48089, sold separately). Also available from Rockler, the complete Rockler CNC Table w/Stand and Controller Brackets.

Rockler Customizable Shop Stand

Rockler Customizable Shop Stand
$29.99

The Rockler Customizable Shop Stand is perfect as a work station, router table cabinet, workbench, assembly table or tool stand! You can easily use your grinder, sander, router table, scroll saw, chop saw and more!All legs and stretchers pre-drilled to easily add sides, bottom and hinged doors for a built-in cabinet, and have square holes for easy assembly with carriage bolts.Shop stand legs are heavy-duty 1/8'' steel to support any shop application. With 4'' x 1/2'' heavy-duty adjustable leveler for various height settings. Includes four 32'' legs and all mounting hardware (carriage bolts and nuts).Stand stretchers available in four sizes: 18'', 24'', 36'', 48'' and 60''. Each size includes four stretchers. Top stretchers can be mounted flush with top or 4'' down to add drawer or woodworking vice. Maximum stand size is 60'' x 60''. All parts coated with durable black sand paint. Shop stand hinges come complete with nuts and bolts for attaching to metal frames.How To Order:Step 1: Determine your ideal shop stand height. Purchase 1 set of 28" or 32" Shop Stand Legs.Step 2: Determine your ideal shop stand length. Purchase 1 set of Stand Stretchers (18", 24", 36", 48", or 60'').Step 3: Determine your ideal shop stand depth. Purchase 1 set of Stand Stretchers (18", 24", 36", 48", or 60'').Step 4: Complete your Rockler Shop Stand with a top, casters or drawers.Table TopsCastersDrawersShop Stand Accessories

Rockler Dust-Free Shop Tray, 5'' x 18'' x 3''

Rockler Dust-Free Shop Tray, 5'' x 18'' x 3''
$26.99

You'll keep tools and accessories right where you need them with this 5" x 18" x 3" Dust-Free Shop Tray! This rugged galvanized steel tray has a mesh bottom designed to hold your router tools, bits, wrenches, pencils, tape measure, and other shop accessories ... anything except dust and debris which falls through the mesh bottom. Includes two sets of pre-drilled mounting holes, one set is 16"-on-center (3/8" diameter hang slot), the other (3/16" H x 3/8" W oval) set fits any of our 18" deep Steel Shop Stands, including our Router Table Steel Stand. Made in USA.Technical Details: Ruggedly built out of galvanized steel Holds router bits, wrenches, tape measure, pencil, and more Mesh bottom allows dust and debris to fall to the floor for efficient cleanup Includes two sets of pre-drilled mounting holes, one set is 16"-on-center (3/8" diameter hang slot), the other (3/16" H x 3/8" W oval) set fits any of our 18" deep Steel Shop Stands, including our Router Table Steel Stand. Measures 5" x 18" x 3" high Made in USA

Rockler Glue Bottle/Spray Can Rack

Rockler Glue Bottle/Spray Can Rack
$20.99

Keep your spray cans and glue bottles close by and organized with a Glue Bottle/Spray Can Rack! This rugged galvanized steel rack holds up to five standard spray cans or three spray cans and two quart-sized Glue Storage Containers (sold separately, #23962). Two sets of pre-drilled mounting holes, one set is 16"-on-center, make it easy to mount to a wall or the side of the 18" deep Steel Shop Stand (sold separately, #68834). Made in USA.Technical Details: Ruggedly built out of galvanized steel Two sets of pre-drilled mounting holes, one set is 16"-on-center (3/8" diameter hang slot), the other (3/16"H x 3/8"W oval) set fits our 18" deep Steel Shop Stand (sold separately, #68834) Measures 4-1/2" x 18" x 4" high Three holes measure 2-7/8" and are made for standard size spray cans Two holes measure 3-1/4" and are made for quart-sized glue Glue Storage Containers (sold separately, #23962) Made in USA

Rockler Shop Stand Risers, 6''

Rockler Shop Stand Risers, 6''
$24.99

Add these Shop Stand Risers to any of our Rockler Shop Stand Legs for greater comfort and utility. By combining the risers with the various leg lengths, you can attain a wide range of intermediate heights. Thanks to the included hardware and their rugged 1/8'' thick steel construction, the risers offer a rock-solid connection. Holes in the bottom allow you to use the adjustable levelers included with your legs, or you can attach optional casters (47034) for mobility.

Sjobergs Elite Height Adjustment Blocks

Sjobergs Elite Height Adjustment Blocks
$102.00

If you are above average in height, you'll appreciate the relief these adjustment blocks will provide for your back. Once installed, they swing on hinges so the bench height can be easily increased by 3-1/2'', reducing excessive stooping and bending. Simply lift the end of the bench, swing the block under the trestle feet, and insert the locking bolt. For use with Sjobergs Elite workbenches (e.g. 56340, sold separately)Hinges are pre-installed for easy installationIncludes locking bolts

Pages: 1 2next pagelast page