Products tagged with: lumber

Pages: 1 2 3next pagelast page

African Mahogany by the Piece-1/2" Thickness

African Mahogany by the Piece-1/2" Thickness
$5.99

African Mahogany is strong, yet light, and works beautifully with hand tools. The color matures from a salmon tone when freshly cut, into a rich red or brown with age. The grain varies from straight to curly, sometimes producing highly attractive figures. Flat-sawn boards feature wavy horizontal bands. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations. Thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Texture: Fine or medium to coarse, and uniform.Luster: Highly lustrous.Movement: Mahogany is considered to be one of the most stable timbers.Durability: High durability, resistant to brown-rot and white rot fungi. Moderately resistant to dry-wood termite attack.Weathering Properties: Very good - a great choice for boat building.Planing: The wood is easy to plane, but figured grain may chip and tear.Turning: Easy - turned surfaces are usually clean.Polishing characteristics: Good.Steam Bending: Fairly good.Strength: Variable, but generally high bending strength and medium crushing strength. Hardness and weight are moderate, and density is high.

African Mahogany by the Piece-1/4" Thickness

African Mahogany by the Piece-1/4" Thickness
$7.99

African Mahogany is strong, yet light, and works beautifully with hand tools. The color matures from a salmon tone when freshly cut, into a rich red or brown with age. The grain varies from straight to curly, sometimes producing highly attractive figures. Flat-sawn boards feature wavy horizontal bands. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations. Thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Texture: Fine or medium to coarse, and uniform.Luster: Highly lustrous.Movement: Mahogany is considered to be one of the most stable timbers.Durability: High durability, resistant to brown-rot and white rot fungi. Moderately resistant to dry-wood termite attack.Weathering Properties: Very good - a great choice for boat building.Planing: The wood is easy to plane, but figured grain may chip and tear.Turning: Easy - turned surfaces are usually clean.Polishing characteristics: Good.Steam Bending: Fairly good.Strength: Variable, but generally high bending strength and medium crushing strength. Hardness and weight are moderate, and density is high.

African Mahogany by the Piece-1/8" Thickness

African Mahogany by the Piece-1/8" Thickness
$4.99

African Mahogany is strong, yet light, and works beautifully with hand tools. The color matures from a salmon tone when freshly cut, into a rich red or brown with age. The grain varies from straight to curly, sometimes producing highly attractive figures. Flat-sawn boards feature wavy horizontal bands. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations. Thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Texture: Fine or medium to coarse, and uniform.Luster: Highly lustrous.Movement: Mahogany is considered to be one of the most stable timbers.Durability: High durability, resistant to brown-rot and white rot fungi. Moderately resistant to dry-wood termite attack.Weathering Properties: Very good - a great choice for boat building.Planing: The wood is easy to plane, but figured grain may chip and tear.Turning: Easy - turned surfaces are usually clean.Polishing characteristics: Good.Steam Bending: Fairly good.Strength: Variable, but generally high bending strength and medium crushing strength. Hardness and weight are moderate, and density is high.

African Mahogany by the Piece-3/4" Thickness

African Mahogany by the Piece-3/4" Thickness
$5.99

African Mahogany is strong, yet light, and works beautifully with hand tools. The color matures from a salmon tone when freshly cut, into a rich red or brown with age. The grain varies from straight to curly, sometimes producing highly attractive figures. Flat-sawn boards feature wavy horizontal bands. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations. Thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Texture: Fine or medium to coarse, and uniform.Luster: Highly lustrous.Movement: Mahogany is considered to be one of the most stable timbers.Durability: High durability, resistant to brown-rot and white rot fungi. Moderately resistant to dry-wood termite attack.Weathering Properties: Very good - a great choice for boat building.Planing: The wood is easy to plane, but figured grain may chip and tear.Turning: Easy - turned surfaces are usually clean.Polishing characteristics: Good.Steam Bending: Fairly good.Strength: Variable, but generally high bending strength and medium crushing strength. Hardness and weight are moderate, and density is high.

Bubinga by the Piece-1/2" Thickness

Bubinga by the Piece-1/2" Thickness
$10.99

Often referred to as "African Rosewood," Bubinga has become a popular choice for musical instruments and fine decorative pieces. It showcases gorgeous grain patterns and a myriad of reddish brown tones with purple veining. These thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up!Tree: Often reaches a height of over 100 feet, with trunk diameters of 36 inches.Sapwood: Whitish.Heartwood: Medium red-brown or red to reddish-brown with light red/purple veins.Grain: Straight or interlocked.Texture: Even grain ranging from fine to very fine.Luster: Very lustrous.Odor: Emits a pungent odor when freshly cut.Movement: Dimensionally stable. Retains its shape well after machining.Natural Durability: Naturally resistant to decay and termite attack.Cutting Resistance: Bubinga can be readily sawn, but due to its density, a slow feed rate is advised.Working characteristics: Responds well to both machine and hand tools, but cutting edges must be kept sharp.Polishing: Takes an excellent polish.Strength: The wood is extremely strong, with high bending and crushing strength.

Bubinga by the Piece-1/4" Thickness

Bubinga by the Piece-1/4" Thickness
$4.99

Often referred to as "African Rosewood," Bubinga has become a popular choice for musical instruments and fine decorative pieces. It showcases gorgeous grain patterns and a myriad of reddish brown tones with purple veining. These thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up!Tree: Often reaches a height of over 100 feet, with trunk diameters of 36 inches.Sapwood: Whitish.Heartwood: Medium red-brown or red to reddish-brown with light red/purple veins.Grain: Straight or interlocked.Texture: Even grain ranging from fine to very fine.Luster: Very lustrous.Odor: Emits a pungent odor when freshly cut.Movement: Dimensionally stable. Retains its shape well after machining.Natural Durability: Naturally resistant to decay and termite attack.Cutting Resistance: Bubinga can be readily sawn, but due to its density, a slow feed rate is advised.Working characteristics: Responds well to both machine and hand tools, but cutting edges must be kept sharp.Polishing: Takes an excellent polish.Strength: The wood is extremely strong, with high bending and crushing strength.

Bubinga by the Piece-1/8" Thickness

Bubinga by the Piece-1/8" Thickness
$13.99

Often referred to as "African Rosewood," Bubinga has become a popular choice for musical instruments and fine decorative pieces. It showcases gorgeous grain patterns and a myriad of reddish brown tones with purple veining. These thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up!Tree: Often reaches a height of over 100 feet, with trunk diameters of 36 inches.Sapwood: Whitish.Heartwood: Medium red-brown or red to reddish-brown with light red/purple veins.Grain: Straight or interlocked.Texture: Even grain ranging from fine to very fine.Luster: Very lustrous.Odor: Emits a pungent odor when freshly cut.Movement: Dimensionally stable. Retains its shape well after machining.Natural Durability: Naturally resistant to decay and termite attack.Cutting Resistance: Bubinga can be readily sawn, but due to its density, a slow feed rate is advised.Working characteristics: Responds well to both machine and hand tools, but cutting edges must be kept sharp.Polishing: Takes an excellent polish.Strength: The wood is extremely strong, with high bending and crushing strength.

Bubinga by the Piece-3/4" Thickness

Bubinga by the Piece-3/4" Thickness
$11.99

Often referred to as "African Rosewood," Bubinga has become a popular choice for musical instruments and fine decorative pieces. It showcases gorgeous grain patterns and a myriad of reddish brown tones with purple veining. These thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up!Tree: Often reaches a height of over 100 feet, with trunk diameters of 36 inches.Sapwood: Whitish.Heartwood: Medium red-brown or red to reddish-brown with light red/purple veins.Grain: Straight or interlocked.Texture: Even grain ranging from fine to very fine.Luster: Very lustrous.Odor: Emits a pungent odor when freshly cut.Movement: Dimensionally stable. Retains its shape well after machining.Natural Durability: Naturally resistant to decay and termite attack.Cutting Resistance: Bubinga can be readily sawn, but due to its density, a slow feed rate is advised.Working characteristics: Responds well to both machine and hand tools, but cutting edges must be kept sharp.Polishing: Takes an excellent polish.Strength: The wood is extremely strong, with high bending and crushing strength.

Cherry by the Piece-1/2" Thickness

Cherry by the Piece-1/2" Thickness
$9.99

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years. Full height is attained in about 100 years.Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance.Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.Luster: Rich and satiny. Odor: Emits a fruity aroma when cut.Steam Bending: Good. Often compared to Beech and Ash.

Cherry by the Piece-1/4" Thickness

Cherry by the Piece-1/4" Thickness
$4.99

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years. Full height is attained in about 100 years.Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance.Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.Luster: Rich and satiny. Odor: Emits a fruity aroma when cut.Steam Bending: Good. Often compared to Beech and Ash.

Cherry by the Piece-1/8" Thickness

Cherry by the Piece-1/8" Thickness
$4.99

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years. Full height is attained in about 100 years.Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance.Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.Luster: Rich and satiny. Odor: Emits a fruity aroma when cut.Steam Bending: Good. Often compared to Beech and Ash.

Cherry by the Piece-3/4" Thickness

Cherry by the Piece-3/4" Thickness
$9.99

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years. Full height is attained in about 100 years.Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance.Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.Luster: Rich and satiny. Odor: Emits a fruity aroma when cut.Steam Bending: Good. Often compared to Beech and Ash.

Curly Bubinga Sold by the Piece

Curly Bubinga Sold by the Piece
$16.99

Often referred to as "African Rosewood," Bubinga has become a popular choice for musical instruments and fine decorative pieces. It showcases gorgeous grain patterns and reddish-brown tones with purple veining.Tree: Often reaches a height of over 100 feet, with trunk diameters of 36 inches.Sapwood: Whitish.Heartwood: Medium red-brown or red to reddish-brown with light red/purple veins.Grain: Straight or interlocked.Texture: Even grain ranging from fine to very fine.Luster: Very lustrous.Odor: Emits a pungent odor when freshly cut.Movement: Dimensionally stable. Retains its shape well after machining.Natural Durability: Naturally resistant to decay and termite attack.Cutting Resistance: Bubinga can be readily sawn, but due to its density, a slow feed rate is advised.Working characteristics: Responds well to both machine and hand tools, but cutting edges must be kept sharp.Polishing: Takes an excellent polish.Strength: The wood is extremely strong, with high bending and crushing strength.

Curly Honduras Mahogany Sold by the Piece

Curly Honduras Mahogany Sold by the Piece
$16.49

Curly Honduras Mahogany has a beautiful combination of dark and light bands of pink and purple browns. Cuts nicely without chipping and is ideal for many woodworking applications.

Curly Maple Sold by the Piece-1/2" Thickness

Curly Maple Sold by the Piece-1/2" Thickness
$10.99

This curly soft maple is highly figured with tiger-striped rays running perpendicular to the grain pattern. Along with the wood's light color, this striping lends a shimmering quality to the lumber. Even unfinished, the wood has a very pleasing interaction with light. It is no surprise, then, that curly maple has become a woodworker's favorite for accents, specialty furniture, musical instruments, and more.To make the figure in this curly maple really "pop", we recommend using an oil product (tung, linseed, etc.), as opposed to a stain. If a lacquer or urethane finish is necessary, adding a coat or two of clear wax-free shellac before the final finishing will ensure that the figure stands out.

Curly Maple Sold by the Piece-1/4" Thickness

Curly Maple Sold by the Piece-1/4" Thickness
$8.99

This curly soft maple is highly figured with tiger-striped rays running perpendicular to the grain pattern. Along with the wood's light color, this striping lends a shimmering quality to the lumber. Even unfinished, the wood has a very pleasing interaction with light. It is no surprise, then, that curly maple has become a woodworker's favorite for accents, specialty furniture, musical instruments, and more.To make the figure in this curly maple really "pop", we recommend using an oil product (tung, linseed, etc.), as opposed to a stain. If a lacquer or urethane finish is necessary, adding a coat or two of clear wax-free shellac before the final finishing will ensure that the figure stands out.

Curly Maple Sold by the Piece-1/8" Thickness

Curly Maple Sold by the Piece-1/8" Thickness
$7.99

This curly soft maple is highly figured with tiger-striped rays running perpendicular to the grain pattern. Along with the wood's light color, this striping lends a shimmering quality to the lumber. Even unfinished, the wood has a very pleasing interaction with light. It is no surprise, then, that curly maple has become a woodworker's favorite for accents, specialty furniture, musical instruments, and more.To make the figure in this curly maple really "pop", we recommend using an oil product (tung, linseed, etc.), as opposed to a stain. If a lacquer or urethane finish is necessary, adding a coat or two of clear wax-free shellac before the final finishing will ensure that the figure stands out.

Curly Maple Sold by the Piece-3/4" Thickness

Curly Maple Sold by the Piece-3/4" Thickness
$12.99

This curly soft maple is highly figured with tiger-striped rays running perpendicular to the grain pattern. Along with the wood's light color, this striping lends a shimmering quality to the lumber. Even unfinished, the wood has a very pleasing interaction with light. It is no surprise, then, that curly maple has become a woodworker's favorite for accents, specialty furniture, musical instruments, and more.To make the figure in this curly maple really "pop", we recommend using an oil product (tung, linseed, etc.), as opposed to a stain. If a lacquer or urethane finish is necessary, adding a coat or two of clear wax-free shellac before the final finishing will ensure that the figure stands out.

Pages: 1 2 3next pagelast page