Products tagged with: power
Pack of six 220-grit ceramic oxide abrasive belts for the Work Sharp WSKTS Knife and Tool Sharpener (40323, sold separately). Intended for light shaping and sharpening applications. Produces a toothy cutting edge for long life in utility applications.
Pack of six 6000-grit silicon carbide abrasive belts for the Work Sharp WSKTS Knife and Tool Sharpener (40323, sold separately). Intended for honing applications. Similar to honing with a leather strop. Highly conformable to hone gut hooks and serrated edges. Very cool cutting for the most delicate blades.
Pack of six 80-grit aluminum oxide abrasive belts for the Work Sharp WSKTS Knife and Tool Sharpener (40323, sold separately). Intended for coarse shaping and tool sharpening applications. Use caution to avoid heat on thin blades near the tip. Use to change bevel angle, shape blade or repair chips. Great for light-duty deburring and rust/paint removal.
The Bosch Multi-X Dust Extraction Kit is an accessory dust collection attachment for the Bosch line of MX30E Oscillating Multi-Tools (e.g. 45718, sold separately). The Dust Kit includes a tube, vacuum hose adaptor and a set of seals for clean dust-free grinding, sanding, shaping, scraping and cutting.
Bosch's new MX30E Multi-Tool is the first in the lineup to offer tool-free accessory changes - simply flip a lever to go to from cutting, to scraping, to grinding, to sanding. And since you don't even have to remove the center pin, there's no chance of losing it during accessory changes. High power 3.0 amp motor boasts plenty of power for heavier applications, while the variable speed dial allows you to match the speed to the application and type of material, and the Constant Response circuitry maintains speed under load. Special attention was also paid to ergonomics, and to keeping the profile of the tool compact enough to fit into the tight spaces demanded of it.Technical Details:Offered in three different kits, the MX30EC-21 (45718), the MX30EK-33 (44517) and MX30EL-37 (48150), all of which include the MX30E Multi-Tool, a carrying case, and a basic set of attachments. The MX30EK-33 also includes a metal saw blade, carbide grit rasp and 10 additional sanding sheets. The MX30EL-37 Kit also includes all of those, plus an extra wood saw blade, a wood/metal plunge cut blade, and a caulk blade. Scroll down to "?Specifications: Amperage: 3Length: 12.60" Oscillating Angle: L/R: 1.4 Degrees (2.8 Degrees Total)Oscillations Per Minute: 8000 - 20000Rating: 12VVoltage: 120 V ACWeight (lbs.): 3.7(1) OSC138JF Japanese-Tooth Wood Saw Blade(1) OSC2RSC Rigid Scraper Blade(1) OSC312F Wood/Metal Saw Blade(1) OSC312RF RIFF Grout Blade(1) OSC112 Wood Saw Blade(1) SDP001 Sanding Pad(15) Wood and Paint-Sanding Sheets(1) Accessory Box(1) Carrying Case
This mandrel and buffing wheel attach to your Robert Sorby ProEdge Sharpening System (26432, sold separately), allowing you to perform a final polish and give your tools a like-new finish. Simply install the mandrel, thread on the mop, apply some of the included honing paste and polish to your heart's content. Use with the Robert Sorby ProEdge Sharpening System (26432, sold separately)Ideal for restoring that factory finishIncludes mandrel (with mounting bolts and hex key), buffing mop and honing paste to create a high polish on any steel
Although its attractive price might suggest an entry level machine, the CNC Piranha is every bit as capable as its CNC Shark cousins and it even includes a convenient touch-screen interface! Its compact 12'' x 18'' table makes it perfect for smaller-scale projects like carvings, plaques, ornamental boxes and precision parts machined from wood, soft metals, or plastics, all at a fraction of the price of a full-sized CNC. With its 3D carving capability, including a 3D models library, you can carve expensive corbels, cut intricate inlays and engravings. The CNC Piranha has such incredible accuracy that you can engrave custom circuit boards with it. In addition, the entire machine can easily fit on one end of your bench. Design your project with the included VCarve Desktop 8.0 Design software on a PC computer with USB 2.0 port (computer not included). Then save the program directly to a USB flash drive, plug it into the Pendant, select your file, and hit the run button. By using the flash drive, your computer won't be subjected to a dusty shop environment. Put the power of the Piranha to work for you today! Made in USA.Note:Requires a PC computer with USB 2.0 port (not included)Requires a Bosch, Dewalt, Porter Cable, or similar style palm router (sold separately). Included router clamp fits the Bosch router; Dewalt and Porter Cable routers require a separate router clamp (58703, sold separately)Currently not compatible with the Touch Probe (upgrade coming soon)
The extended base Shark Pro Plus HD offers a whopping 50'' of X-axis capacity-the largest of any Shark to date. It is reinforced to handle larger routers up to 2-1/4 HP, including the Porter Cable 890 series. To accommodate the greater torque levels, it features adjustable bearings to give more stability during heavy cutting. With a table measuring 28'' x 63'', it is ideally suited for carvings and machining operations on larger signs, doors and other projects made from wood, soft metals or plastics. It boasts impressive power, speed, accuracy, and ease of use. Rugged aluminum and high-density polyethylene construction. Simply supply a PC computer with USB 2.0 port and any of the routers listed below, connect the USB cable to the controller box and load the software.The CNC Shark HD extended also includes the NEW Virtual Zero software. This new and CNC Shark exclusive software ''maps'' the surface of your table or work piece and uses the map as a dynamic reference point. This virtually eliminates problems caused by warped or bowed work pieces.Includes VCarve Pro 8.0 (Item #58150) software, Vector Art 3D Sampler Pack, and CNC Shark control software with Virtual Zero technology.Bosch 1617 and 1618Porter Cable 890 SeriesPorter Cable 690 Series (6902VS must be manually started)Dewalt 610, 616, 618 Features: Increased travel with a max XYZ capacity of 50'' x 25'' x 7''Gantry has been redesigned to ensure more consistent heavy machining resultsReinforced to handle up to 2.25 hp router or spindleX and Y axis have supported linear guidesZ travel up to 7'' max (2-1/2'' more than the regular plus)Enhanced controller with more power that allows up to 200'' per minAutomatic on and off software control of routerProfessional aluminum case with push-button EstopPendant control capability (Designed for numeric laptop keypad)Heavy, interlocked aluminum T-slot top (28'' x 63'') for more versatile clampingPrecision lead screws with anti backlash on all axesBearings: precision linear bearing guides for maximum rigidityResolution: control to 0.0005''High speed stepper motors rated at 269 oz/inUSB interface with on-controller memory storage24V supply to provide full power to the steppers and future attachmentsOne year warranty on parts and labor, special shipping charges applyCompatible with CNC Shark Touch Probe (35610, sold separately)Made in USA Package includes the following: 3/8'' dia. V-groove Bit and two hold-down clampsMounts for router (router sold separately; see listing) VCarve Pro 8.0 (Item #58150) software ($699.00 value) Virtual Zero Software Package ($149.99 value) Vector Art 3D Sampler Pack Free software upgrades
With a table measuring 15-3/4" x 31-1/2", the CNC Shark is ideally suited for carvings and machining operations on a large variety of signs, doors and other small projects. It boasts impressive power, speed, accuracy, and ease of use. With its robust steel and high-density poly-ethylene construction, it can take accidental impacts that would normally damage or destroy an aluminum or MDF machine. The included clamping table features two hold-down slots for securing work anywhere along the length of the table. You supply a PC computer with USB 2.0 port and a Bosch Colt router (sold separately). Simply connect the USB cable to the controller box and the other end to your computer (not compatible with Mac computers). The CNC Shark also includes the NEW Virtual Zero software. This new and CNC Shark exclusive software ''maps'' the surface of your table or work piece and uses the map as a dynamic reference point. This virtually eliminates problems caused by warped or bowed work pieces.FREE CNC Project Plans from Woodworker's Journal:Butler's TrayWeather StationCribbage BoardWorkshop JigModern TableOutlet CoverLuggage TagsChinese CheckerboardPuzzle TrayIntroducing CNCSharkTalk.com, a website presented by Rockler where CNC Shark users can chat together, watch how-to videos, ask questions, learn from each other and even show off their CNC Shark projects.
Ideal for use with our dual blade tenon cutters to build rustic furniture.Features variable speed (0-550 RPM) reversing switch for excellent drilling control.9.0 amp, 120 volt motor provides enough power for any shop application.With soft-grip handle, two-position rear spade handle and three-position side handle for greater control for all drilling and mixing applications.1/2" chuck size.Includes chuck key with holder.Weighs 7.5 lbs.See our Dual Blade Tenon Cutters to build rustic furniture
Compact in size and weight to allow access into tight areas and reduce fatigue whileworking. Frameless motor delivers extended durability and life in an operating rangeof 0 to 2,400 RPM while creating 1,330 inch pounds of torque to perform a wide rangeof fastening applications. Heavy-duty impacting mechanism directs torque to fastenerwithout kickback. Textured anti-slip comfort grip provides maximum comfort andcontrol during operation. 18V battery required (sold separately).3 year limited manufacturer warranty
This Drill/Driver boasts the versatility of a traditional drill chuck with a two-speed transmission and the compact design common to all of DeWalt's 12V MAX platform. The 3/8" chuck accepts drill bits as well as drivers, and it has a greater speed range of 0-1500 RPM. The chuck is encircled by three LED lights that cast bright, shadow-free task lighting exactly where it's needed, and the compact head and chuck fit into tight spaces. Sculpted ergonomic handle cuts down on hand fatigue. Includes Drill/Driver, (2) 12V Li-Ion batteries, 40-min charger, belt hook, bit tip and contractor bag.Also available in a combo package with the DeWalt 12V MAX Impact Driver (see #41453).Features:3/8" single sleeve keyless chuck.Two-speed transmission: 0-400 and 0-1500 RPMWeighs 2.2 lbs.Three LED lights for unobstructed lighting of work area.Clutch is easy to access.Includes (2) 12V MAX Lithium Ion battery packs.Includes 40-minute charger.Battery stores in base, not handle, for better balance and vertical storage.Reversible belt clip for portability.3-Year Limited Warranty
Need to break a rusted bolt, assemble your workbench in record time, or cinch down those lug nuts good and tight? Look no further than DeWalt's new compact, lightweight 12V MAX Impact Wrench. With 1150 in/lbs of torque, yet only 2.2 lbs of weight, it measures up to the big boys in all the right places. The 1/4" hex chuck makes one-handed bit changes a snap, and 3 LED lights encircle the chuck for bright, shadow-free lighting. The compact head and chuck are great for tight work areas, and the sculpted ergonomic handle cuts down on hand fatigue. Includes 3/8" Drive Impact Wrench, (2) 12V Li-Ion batteries, 40-min charger, belt hook and contractor bag.Features and Specifications:1/4" hex chuck-just push the bit in to install.Also accepts 1" hex bits for compact spaces.1150 in/lbs. of max torqueWeighs 2.2 lbs.Three LED lights for unobstructed lighting of work area.Includes (2) 12V MAX Lithium Ion battery packs.Includes 40-minute charger.Battery stores in base, not handle, for better balance and vertical storage.Fixed speed.3/8" hog ring anvil.3400 impacts per minute.Max RPM: 2450.Max torque: 96 ft/lbs.Length: 6-1/4"Reversible belt clip for portability.3-Year Limited Warranty
Heavy-Duty 10" Wet Tile Saw3 Year Limited WarrantyDesigned to rip 24" tile and cut 18" tile on diagonal69 lbs. - allows one person to transport saw and all attachments in 2 tripsRail system is integrated into the saw frame as one piece for highly accurate cutsIntegrated 45 & 22.5 degree Bevel FeaturePlunge feature for making quick and accurate center cutsRear and side water attachments help contain water run-off and blade sprayFeatures & Benefits:Cantilevering Rail/Cart system allows for 24" ripping capacity - 18" tile on diagonalOnly 69 lbs - allows one person to transport and set up tile sawStainless steel rail system is integrated into the tile saw frame, insuring accuracte cutsIntegrated 45/22.5½ miter feature for quick angled cutsPlunge feature allows the user to make quick plunge cuts for electrical outlets and A/C registersDual water nozzles can be adjusted for optimal water placement on blade in order to minimize over-spray and mist
Heavy-Duty 36V Cordless Reciprocating Saw Kit with NANO Technology3 Year Limited Warranty1-1/8" stroke length & 0-3,000 spm for faster cutting4-position keyless blade clamp for flush cutting and versatilityAnti-slip comfort grip for increased comfort and control3-position adjustable shoeDEWALT» exclusive NANO-phosphate lithium ion cells offer long battery life & durability: 2,000 rechargesDEWALT built high power, high efficiency motor with electric brake handles the toughest applicationsIncludes:1 hour charger36V NANO-phosphate lithium ion battery packreciprocating saw bladeheavy-duty kit boxFeatures & Benefits:1-1/8" stroke length and 0-3,000 spm for fast cutting4-position keyless blade clamp allows quick blade change, flush cutting, and versatilityAnti-slip comfort grip for better control3-position adjustable shoe for adjusting depth of cut and extends blade lifeDEWALT½ exclusive NANO-phosphate lithium ion cells offer long battery life & durability: 2,000 rechargesDEWALT½ built high power, and high efficiency motor with electric brake powers through the toughest applications
With an operating range of 0-3,000 SPM for fast cutting speed and a four-positionblade clamp for increased versatility, you'll be able to accomplish a broad spectrumof cutting jobs, including flush cuts, with one saw. A stroke length of 1-1/8" alsocontributes to fast cutting capability. Lever-action keyless blade clamp makes bladechanges quick and easy, and the anti-slip comfort grip delivers comfort and controlduring operation. Requires 18V battery pack (sold separately).Additional Features:3 year limited manufacturer warrantyPivoting adjustable shoe has an open top for maximum visibilityVariable speed with trigger lock for increased blade control
Heavy-Duty 18V Compact Cordless 4-Tool Combo Kit3 Year Limited WarrantyDC720 18V compact dirll/driver with 410 unit watts out of maximum powerDW936 18V trim saw with 5-3/8" 16 tooth carbide blade can cut 2 x 4's in a single passDW938 18V reciprocating saw with keyless blade clampDW908 18V pivoting head flashlight which allows light to be projected in any directionIncludes:DC720 1/2" compact drill/driverDW938 reciprocating sawDW936 trim sawDW908 pivoting head flashlight1 hour charger(2) 18V batteriesFeatures & Benefits:DC720 18V 1/2" compact drill/driver delivers 410 unit watts out of maximum powerDW936 18V trim saw with 5-3/8" 16-tooth carbide blade and rip fence can cut a "2x4" in a single passDW938 18V cordless reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaftDW908 18V pivoting head flashlight which allows light to be projected in any direction