Products tagged with: sharpening

Pages: 1 2 3next pagelast page

150mm Tempered Glass Wheel for Work Sharp™ Tool Sharpener

150mm Tempered Glass Wheel for Work Sharp™ Tool Sharpener
$19.99

For applying PSA abrasives. Allows you to expand your Work Sharp's PSA abrasive selection, or serve as a direct replacement.

2'' x 6'' Double-Sided Diamond Stone

2'' x 6'' Double-Sided Diamond Stone
$59.99

At 2'' wide x 6'' long, these diamond abrasive bench stones are big enough for most knives, chisels and smaller planes. EZE-Lap diamond stones combine the highest quality industrial-grade diamond particles with a stainless alloy that is bonded to a precision matched metal substrate. The resulting sharpening surface measures about 72 on the Rockwell C hardness scale, and works with carbide, ceramic, tool steel, hardened materials and the newer stainless steels. This process produces top quality diamond abrasives at the lowest possible price. They are flat, extremely durable, and turn out consistently sharp edges with excellent finish quality. Includes non-skid rubber mat. Use for hunting and fishing knives, kitchen knives, woodworking tools, exacto blades, axes and moreDouble-sided—just flip the stone to change gradesFlat surface doesn't wear away—no need to reflatten the stonesLong-lasting, durable diamond abrasiveMade in USA

220-Grit Sanding Belts for Work Sharp WSKTS, 6-Pack

220-Grit Sanding Belts for Work Sharp WSKTS, 6-Pack
$9.99

Pack of six 220-grit ceramic oxide abrasive belts for the Work Sharp WSKTS Knife and Tool Sharpener (40323, sold separately). Intended for light shaping and sharpening applications. Produces a toothy cutting edge for long life in utility applications.

3 Piece Waterstone Sharpening Set

3 Piece Waterstone Sharpening Set
$64.99

Check out our combination grit sharpening stones and keep your tools in peak condition! The 3-Piece Waterstone Set is a sure savings over buying the individual stones. The set includes one 800/4000 combination waterstone, one 6000 single grit waterstone and one Nagura stone.The 800/4000 combination waterstone is great for removing smaller nicks and for finish sharpening of woodworking chisels and other tools.The 6000-grit waterstone creates a polished edge.The Nagura Stone forms a paste on finer grit waterstones to speed and enhance polishing. Use with the 6000 grit stone.These stones can be reflattened after sharpening wears the surface by wet sanding the stone on a flat surface with silicone carbide wet-dry abrasive sheet.

3'' x 8'' Double-Sided Diamond Stone

3'' x 8'' Double-Sided Diamond Stone
$99.99

At 3'' wide x 8'' long, these diamond abrasive bench stones have plenty of room for even the largest plane irons. EZE-Lap diamond stones combine the highest quality industrial-grade diamond particles with a stainless alloy that is bonded to a precision matched metal substrate. The resulting sharpening surface measures about 72 on the Rockwell C hardness scale, and works with carbide, ceramic, tool steel, hardened materials and the newer stainless steels. This process produces top quality diamond abrasives at the lowest possible price. They are flat, extremely durable, and turn out consistently sharp edges with excellent finish quality. Includes non-skid rubber mat. Use for hunting and fishing knives, kitchen knives, woodworking tools, exacto blades, axes and moreDouble-sided—just flip the stone to change gradesFlat surface doesn't wear away—no need to reflatten the stonesLong-lasting, durable diamond abrasiveMade in USA

3-1/4" x 2" Wallet-Sized Diamond Sharpening Stone

3-1/4" x 2" Wallet-Sized Diamond Sharpening Stone
$15.99

They might be small enough to slip in your wallet, tool kit, or tackle box, but these diamond sharpening stones do the job. Ultra-hard diamond abrasive gives you a fine edge fast. Designed for use on steel, carbide, glass, ceramic, and even titanium, these compact sharpeners can be used dry or with water - no messy oils needed. The stones also feature an uninterrupted diamond sharpening surface, allowing users to quickly put a razor edge on small cutting edges and pointed tools.Technical Details:3-1/4" x 2" honing surfaceDiamond-impregnated abrasive matrixContinuous sharpening surface ideal for pointed toolsAvailable in coarse, fine, and extra fine gritsIncludes plastic carrying case

6000-Grit Sanding Belts for Work Sharp WSKTS, 6-Pack

6000-Grit Sanding Belts for Work Sharp WSKTS, 6-Pack
$9.99

Pack of six 6000-grit silicon carbide abrasive belts for the Work Sharp WSKTS Knife and Tool Sharpener (40323, sold separately). Intended for honing applications. Similar to honing with a leather strop. Highly conformable to hone gut hooks and serrated edges. Very cool cutting for the most delicate blades.

80-Grit Sanding Belts for Work Sharp WSKTS, 6-Pack

80-Grit Sanding Belts for Work Sharp WSKTS, 6-Pack
$9.99

Pack of six 80-grit aluminum oxide abrasive belts for the Work Sharp WSKTS Knife and Tool Sharpener (40323, sold separately). Intended for coarse shaping and tool sharpening applications. Use caution to avoid heat on thin blades near the tip. Use to change bevel angle, shape blade or repair chips. Great for light-duty deburring and rust/paint removal.

Accessory Bundle for Work Sharp WS3000

Accessory Bundle for Work Sharp WS3000
$69.99

Save money with this accessory kit for the Work Sharp WS3000 (25384, sold separately). The kit includes the 150mm Tempered Glass Wheel (23128), the Edge-Vision Slotted Wheel (27084), the Edge-Vision Slotted Abrasives Kit (28396), the Fine Abrasives Kit (24974) and the Coarse Abrasives Kit (24801). Technical Details:150mm Tempered Glass Wheel allows you to use PSA abrasives, expanding the abrasive selection for the WS3000.Edge-Vision Slotted Wheel allows you to "see through" the wheel so you can see the cutting edge as it is being sharpened.Edge-Vision Slotted Abrasives Kit includes the following premium slotted PSA abrasives: one 150mm P80, two 150mm P400, two 150mm P1200, and one Micro-Mesh 3600.Fine Abrasives Kit includes the following PSA abrasives: four pieces of 150mm P400, six 150mm P1000, and two 2" squares of ceramic oxide P400 sharpening port lapping abrasive.Coarse Abrasives Kit includes two pieces of 150mm P80, two 150mm P120, three 150mm P220, and two 2" squares of ceramic oxide P400 sharpening port lapping abrasive.

Buffing Kit for Robert Sorby ProEdge Sharpening System

Buffing Kit for Robert Sorby ProEdge Sharpening System
$59.99

This mandrel and buffing wheel attach to your Robert Sorby ProEdge Sharpening System (26432, sold separately), allowing you to perform a final polish and give your tools a like-new finish. Simply install the mandrel, thread on the mop, apply some of the included honing paste and polish to your heart's content. Use with the Robert Sorby ProEdge Sharpening System (26432, sold separately)Ideal for restoring that factory finishIncludes mandrel (with mounting bolts and hex key), buffing mop and honing paste to create a high polish on any steel

Coarse Abrasive Kit for Work Sharp™ Tool Sharpener

Coarse Abrasive Kit for Work Sharp™ Tool Sharpener
$14.99

Includes two pieces of 150mm P80, two 150mm P120, three 150mm P220, and two 2" P400 sharpening port lapping abrasive.

Combination Waterstones

Combination Waterstones
$26.99

Keep your valuable tools in peak condition!Combination Waterstones: For preliminary sharpening where chips exist or bevel angle need to be changed, use the 250/100 waterstone. To remove smaller nicks and do a finish sharpening of woodworking chisels and other tools, the 800/4000 combination is the best choice. Finally, use the 1000/6000 waterstone for creating a polished edge. As shown in the photo on the left.Extremely tough man made abrasive material. These stones cut faster than oilstones. Stones must be soaked in water prior to use and kept wet with water during use. Waterstones develop a slurry to speed the honing process.20549 - 250/1000 Combination Grit Waterstone: 7-1/4" (L) x 1" (thick) x 2-1/4" (W)20542 - 800/4000 Combination Grit Waterstone: 7-1/4" (L) x 1" (thick) x 2-1/4" (W)47506 - 1000/6000 Combination Grit Waterstone: 8-1/8" (L) x 1" (thick) x 2-1/16" (W)47522 - Nagura Stone: 3" (L) x 1" (thick) x 7/8" (W)Nagura Stone: Forms a paste on finer grit Waterstones to speed and enhance polishing. Use with the 6000 grit stone. These stones can be reflattened after sharpening wears the surface by wet sanding the stone on a flat surface with silicone carbide wet - dry abrasive sheet.Waterstone Holder: For non-slip sharpening. The arms are made from chrome plated steel that resists rusting. Holder handles stones 7 to 9" long.

Deulen Adhesive Sandpaper, Pack of 6

Deulen Adhesive Sandpaper, Pack of 6
$9.99

Six 2-3/4" x 18" rolls of self-adhesive sandpaper one each of 120, 150, 180, 220, 320 and 400 grit ideal for use with the Deulen Sharpening Jigs for jointer and planer knives.

Diamond Hone Sharpening Set

Diamond Hone Sharpening Set
$17.99

Use these hand-held diamond sharpeners like a file. This three piece set contains medium (400), fine (600) and super-fine (1200) sharpening hones. The diamond impregnated abrasive surface lasts and lasts, while the maneuverable size makes the hones perfect for putting a quick edge on knives, chisels, planer blades, drill bits, router bits and more!Technical Details3/4" x 2" x 1/32" honing surfaceColor coded handles for easy grit identificationIncludes 400, 600, and 1200 grit hones

Diamond Mini-Sharp Stones

Diamond Mini-Sharp Stones
$13.99

Attaches to your key ring for '' anytime, anywhere'' sharpening of knives, router bits, and other tools. Handle folds to protect stone.

Diamond Mini-Sharp Stones - Fine

Diamond Mini-Sharp Stones - Fine
$13.99

Attaches to your key ring for '' anytime, anywhere'' sharpening of knives, router bits, and other tools. Handle folds to protect stone.

Diamond Sharpener

Diamond Sharpener
$9.99

Easy to use and a convenient size!Heat-treated diamond sharpening surface quickly sharpens carbide tools, saw blades, drill bits, knives, fish hooks and more.Diamond surface bonded in a stainless steel alloy for long life.With fountain pen type cover and clip. Heat-treated diamond sharpening surface quickly sharpens carbide tools, saw blades, drill bits, knives, fish hooks and more.

DMT Diamond Wave Sharpener, Fine WAV-F

DMT Diamond Wave Sharpener, Fine WAV-F
$62.99

With just one Diamond Wave Sharpener, you can now properly maintain the cutting edges on a wide range of curved cutting tools, such as in-cannel and out-cannel gouges, carving tools and wood turning tools. The uniquely designed Diamond Wave features a variable radius from 0.0625" to 1", accommodating all curved gouges, and it's the first diamond sharpener to combine convex and concave abrasive surfaces. It's easy to use - just slide the tool along the wave to match the radius, then sharpen with short back and forth strokes. Fine Grit: 600-mesh/25-micron. Made in USA.

Pages: 1 2 3next pagelast page