Products tagged with: wood turning lathe chucks

Pages: 1 2 3 4next pagelast page

#1 Jaws for Oneway Scroll Chuck System

#1 Jaws for Oneway Scroll Chuck System
$52.49

Install these jaws on your Oneway Scroll Chuck (22719, sold separately) or Talon Chuck (20761, sold separately) for turning small bowls, knobs, vases or spindles.Chucking capacities of the Oneway Scroll Chuck with #1 Jaws:External (compression): 3/8" minimum, 2" maximumInternal (expansion): 7/8" minimum, 2-1/2" maximumChucking capacities of the Oneway Talon Chuck with #1 Jaws:External (compression): 3/8" minimum, 1-3/4" maximumInternal (expansion): 7/8" minimum, 2-3/8" maximum

#3 Jaws for Oneway Scroll Chuck System

#3 Jaws for Oneway Scroll Chuck System
$58.79

These jaws fit the Oneway Scroll Chuck (22719, sold separately) and Talon Chuck (20761, sold separately) and have the mass and size necessary for turning larger bowls and vases. They are unparalleled in strength and holding capacity. The #3 jaws have also been outfitted with Oneway's patented profiled jaw design.Chucking capacities of the Oneway Scroll Chuck with #3 Jaws:External (compression): 3-3/8" minimum, 4-3/4" maximumInternal (expansion): 3-7/8" minimum, 5-3/8" maximumChucking capacities of the Oneway Talon Chuck with #3 Jaws:External (compression): 2-7/8" minimum, 4" maximumInternal (expansion): 3-3/8" minimum, 4-5/8" maximum

#3 Jaws for Oneway Stronghold Chuck

#3 Jaws for Oneway Stronghold Chuck
$57.79

The #3 Jaws for the beefy Oneway Stronghold Chuck (30589, sold separately) have the mass and size necessary for large bowls and vases. With their profiled jaws, they provide maximum gripping power with minimal damage to the piece.Chucking capacities of the Stronghold Chuck with #3 Jaws:External (compression): 3-7/8" minimum, 5-1/4" maximumInternal (expansion): 4-1/2" minimum, 6" maximumNote: If your lathe has less than a 16" swing, the Oneway Talon Chuck (20761) is recommended. Stronghold Chuck jaws are NOT compatible with either the original Oneway Chuck or the Talon Chuck.

1" X 8 TPI Insert for Oneway Scroll Chuck System

1" X 8 TPI Insert for Oneway Scroll Chuck System
$31.49

Allows you to mount a Oneway Scroll Chuck (22719, sold separately) or Talon Chuck (20761, sold separately) to a lathe with a 1" x 8 TPI drive spindle.

1-1/4" X 8 TPI Insert for Oneway Scroll Chuck System

1-1/4" X 8 TPI Insert for Oneway Scroll Chuck System
$31.49

Allows you to mount a Oneway Scroll Chuck (22719, sold separately) or Talon Chuck (20761, sold separately) to a lathe with a 1-1/4" x 8 TPI drive spindle.

10'' Longworth Style Chuck

10'' Longworth Style Chuck
$139.99

Just rotate the plates of the Longworth Style Chuck and the soft silicone buttons close in almost instantly, and with perfect concentricity, to hold your project while you make the finishing cuts to the bottom side. Unlike many other rechucking methods, the silicone buttons won't mar your project or your finish. When compressed with the wing nuts, they expand to provide a secure grip. The 1/4" thick phenolic plates provide strength and stability, regardless of humidity. Available in two sizes: the 10" Longworth Style Chuck for mini and midi lathes with a 10" swing, and the 16" Longworth Style Chuck for standard-sized lathes with a 16" swing or larger. Pick up a piece of fine china, and the first thing you'll do after admiring the faceis turn it over to inspect the bottom and insignia. It's no different with turnedbowls, and turners work hard to make the bottom as beautiful as the top. Butchucking a finished bowl face down on the lathe without damaging it hasalways been a challenge - not with the Longworth Style Chuck. Simply rotatethe plates, tighten down the buttons, and you're ready to turn.Eliminates the time and inconvenience of installing, adjusting and readjustingordinary rechucking jaws.Capable of holding projects in compression or expansion mode (from theinside or outside of the rim of your turning project).Buttons close in concentrically, making it easy to center your project.Soft silicone buttons have increased length for better grip and expansioncapabilities.Buttons expand when the wing nut is tightened, and will not mark or deformyour turned piece.Includes 8 buttons. Replacement packs of buttons with hardware are availableseparately (47455).No assembly required.1/4" phenolic discs are extremely durable, stable, and spin in opposingdirections with almost no resistance.The back side of the Longworth Style Chuck has a steel disk approximately 3/8"thick for mounting.The disk is easily gripped by any brand of 4-jaw scroll chuck with the standard50mm #2 jaws.Straight jaws may be used, but dovetail jaws provide a better hold.The dovetail groove accommodates Nova chucks and Vicmarc chucks as well asOneWay type straight jaws.Recommended maximum RPM is 600.Intended for light finishing cuts only. Note for heavy stock removal. Note: Best practice for safety dictates that you engage the tailstock wheneverpossible. Remove the tailstock only when finishing the last bit in the very center,and for finish sanding.Specifications:Capacity in compression mode: 4-1/2" to 8" in diameter.Capacity in expansion mode: 5-3/4" to 9-1/2" in diameter.

16'' Longworth Style Chuck

16'' Longworth Style Chuck
$199.99

Just rotate the plates of the Longworth Style Chuck and the soft silicone buttons close in almost instantly, and with perfect concentricity, to hold your project while you make the finishing cuts to the bottom side. Unlike many other rechucking methods, the silicone buttons won't mar your project or your finish. When compressed with the wing nuts, they expand to provide a secure grip. The 1/4" thick phenolic plates provide strength and stability, regardless of humidity. Available in two sizes: the 10" Longworth Style Chuck for mini and midi lathes with a 10" swing, and the 16" Longworth Style Chuck for standard-sized lathes with a 16" swing or larger. Pick up a piece of fine china, and the first thing you'll do after admiring the faceis turn it over to inspect the bottom and insignia. It's no different with turnedbowls, and turners work hard to make the bottom as beautiful as the top. Butchucking a finished bowl face down on the lathe without damaging it hasalways been a challenge - not with the Longworth Style Chuck. Simply rotatethe plates, tighten down the buttons, and you're ready to turn.Eliminates the time and inconvenience of installing, adjusting and readjustingordinary rechucking jaws.Capable of holding projects in compression or expansion mode (from theinside or outside of the rim of your turning project).Buttons close in concentrically, making it easy to center your project.Soft silicone buttons have increased length for better grip and expansioncapabilities.Buttons expand when the wing nut is tightened, and will not mark or deformyour turned piece.Includes 8 buttons. Replacement packs of buttons with hardware are availableseparately (47455).No assembly required.1/4" phenolic discs are extremely durable, stable, and spin in opposingdirections with almost no resistance.The back side of the Longworth Style Chuck has a steel disk approximately 3/8"thick for mounting.The disk is easily gripped by any brand of 4-jaw scroll chuck with the standard50mm #2 jaws.Straight jaws may be used, but dovetail jaws provide a better hold.The dovetail groove accommodates Nova chucks and Vicmarc chucks as well asOneWay type straight jaws.Recommended maximum RPM is 600.Intended for light finishing cuts only. Note for heavy stock removal. Note: Best practice for safety dictates that you engage the tailstock wheneverpossible. Remove the tailstock only when finishing the last bit in the very center,and for finish sanding.Specifications:Capacity in compression mode: 4-1/2" to 14" in diameter.Capacity in expansion mode: 5-3/4" to 15-1/2" in diameter.

3/4" x 16 TPI Insert

3/4" x 16 TPI Insert
$8.39

Necessary accessory for mounting the 4-Jaw Turning Chuck (26431, sold separately) to a lathe with a 3/4" x 16 tpi drive spindle.

3/4" X 16 TPI Insert for Oneway Scroll Chuck System

3/4" X 16 TPI Insert for Oneway Scroll Chuck System
$31.49

Allows you to mount a Oneway Scroll Chuck (22719, sold separately) or Talon Chuck (20761, sold separately) to a lathe with a 3/4" x 16 TPI drive spindle.

4-Jaw Turning Chuck

4-Jaw Turning Chuck
$106.99

Independently adjustable jaws allow you to lock in square or odd-shaped stock on your lathe. Stepped jaws can also be reversed for added versatility.Technical Details:Stepped jaws can also be reversed for added versatility.Internal measurements: 5-1/4" max., 3/8" min.6" dia. chuck includes key.1" x 8 TPI insert and 3/4" x 16 TPI insert sold separately.Independently adjustable jaws allow you to lock in square or odd-shaped stock. Stepped jaws can also be reversed for added versatility.

Jumbo Jaws for Oneway Scroll Chuck System

Jumbo Jaws for Oneway Scroll Chuck System
$115.49

When mounted on the Oneway Scroll Chuck (22719, sold separately) or the Talon Chuck (20761, sold separately), the machined solid aluminum plates of the Jumbo Jaws form a plate 11" in diameter. With the rubber grippers and the combination of slots and tapped holes machined in the solid aluminum plates, the Jumbo Jaws can hold an infinite number of round, oval or square shapes.Chucking capacities of the Oneway Scroll Chuck with Jumbo Jaws:External (compression): 2-7/8" minimum, 11" maximumInternal (expansion): 4-7/8" minimum, 12" maximumChucking capacities of the Oneway Talon Chuck with Jumbo Jaws:External (compression): 2-7/8" minimum, 11" maximumInternal (expansion): 4-7/8" minimum, 12" maximum

Jumbo Jaws for Oneway Stronghold Chuck

Jumbo Jaws for Oneway Stronghold Chuck
$110.29

The Jumbo Jaws for the Oneway Stronghold Chuck (30589, sold separately) consist of plates machined from solid aluminum. Their combination of slots and tapped holes accept rubber grippers for holding an infinite number of round, oval or square shapes.Chucking capacities of the Stronghold Chuck with Jumbo Jaws:External (compression): 2-3/4" minimum, 11" maximumInternal (expansion): 4-3/4" minimum, 12" maximumNote: If your lathe has less than a 16" swing, the Oneway Talon Chuck (20761) is recommended. Stronghold Chuck jaws are NOT compatible with either the original Oneway Chuck or the Talon Chuck.

Mega Jumbo Jaws for Oneway Stronghold Chuck

Mega Jumbo Jaws for Oneway Stronghold Chuck
$133.39

These machined solid aluminum plates mount to the Oneway Stronghold Chuck (30589, sold separately), and they have a unique combination of slots and tapped holes that accept rubber grippers for holding an infinite number of round, oval or square shapes.Chucking capacities of the Stronghold Chuck with Mega Jumbo Jaws:External (compression): 1-3/4" minimum, 14" maximumInternal (expansion): 4-3/4" minimum, 15" maximumNote: If your lathe has less than a 16" swing, the Oneway Talon Chuck (20761) is recommended. Stronghold Chuck jaws are NOT compatible with either the original Oneway Chuck or the Talon Chuck.

Mini Jumbo Jaws for Oneway Scroll Chuck System

Mini Jumbo Jaws for Oneway Scroll Chuck System
$102.99

Because of their 8-1/2" diameter, these Mini Jumbo Jaws for the Oneway Scroll Chuck (22719, sold separately) and Talon Chuck (20761, sold separately) work on smaller lathes. With the rubber grippers and the combination of slots and tapped holes machined in the solid aluminum plates, the Mini Jumbo Jaws can hold an infinite number of round, oval or square shapes. Grippers are made of hard rubber pressed over a tapered steel sleeve for superior holding.Chucking capacities of the Oneway Scroll Chuck with Mini Jumbo Jaws:External (compression): 2" minimum, 8-1/8" maximumInternal (expansion): 4" minimum, 10-1/8" maximum

Nova 27007 Tool Rest Collar

Nova 27007 Tool Rest Collar
$17.99

The Nova Tool Rest Collar acts as a stop collar for your Nova tool rest. It slides onto the tool rest shank, and maintains a fixed, repeatable height so you don't lose your height adjustment when you angle the rest for different angles of approach. 1" internal diameter fits many common tool rest models. A simple stop collar to provide a fixed height for your tool rest, saving the turner from having to find the same height again each time.Enables the turner to return to a preset height again instantly.1" internal diameter collar fits all Nova tool rests and any other tool rest with a 1" shank.Made from quality steel with chamfered edges.

Nova 2MT Spur Center

Nova 2MT Spur Center
$24.49

This is the standard spur center included with all Nova lathes, and it also works well as a replacement or as an upgrade for another lathe. Its rugged four-prong profile bites into your wood blank to provide a secure grip for spindle turnings and other demanding workpieces. Precisely machined from medium-tensile carbon steel. Fits all Nova lathes, as well as any wood lathe with a 2MT headstock. Overall diameter is 30mm. Inside cone is 8mm at base.

Nova 75mm (3'') Bowl Jaw Set

Nova 75mm (3'') Bowl Jaw Set
$72.99

This jaw set has great holding power for large bowls and moderately sized hollow forms. The dovetail walls are three times the thickness of conventional jaw types, which provide a much more secure grip for large or heavy turning blanks. The mounting screws go right through the wall section to add more support where it's needed most, while the deep, smooth-walled dovetails hold your wood gently but firmly. Triple thickness dovetail walls for rugged work-holding power.Screws go through the wall section to add holding power where it's needed most. Dovetail holds wood gently but firmly.Note: Although these jaws will fit any Nova chuck, they are not recommended for use with the Precision Midi chuck.Capacity range when used with Nova G3 chuck (45748, sold separately)Expansion mode: 3.189" to 4.016".Contraction mode (square stock): 1.339" to 2.165".Contraction mode (spigot): 1.831" to 2.657".Note: Caution recommended when using these jaws with the G3 chuck.Capacity range when used with Nova SuperNova 2 chuck (48906, sold separately):Expansion mode: 3.189" to 4.016".Contraction mode (square stock): 1.339" to 2.165".Contraction mode (spigot): 1.831" to 2.657".Capacity range when used with Nova Titan chuck (45040, sold separately): Expansion mode: 3.189" to 4.409".Contraction mode (square stock): 1.339" to 2.480".Contraction mode (spigot): 1.831" to 3.051.Features standard on all Nova Jaws:Nova chucks give you the same jaw fixing system and same insert/adaptor system across all chuck models.All accessory jaws in the range will fit all the chucks in the range for optimum flexibility. Some, however, are not recommended. See individual jaws for recommendations.Nova chucks are specially designed so the jaws cut into the wood, grip firmly in the contraction mode and provide high tear out strength

Nova 75mm (3'') Long-Nosed Jaw Set

Nova 75mm (3'') Long-Nosed Jaw Set
$80.49

A generous 2" extension beyond the mounting base gives these unique long-nosed jaws a deep reach for tremendous holding power, both internally and externally. The external dovetail provides a secure grip when used in expansion mode with bowls, and the internal dovetail is ideal for use with footed bowls and other turnings. The jaws also feature an internal powergrip for holding spigoted workpieces.Tremendous holding power externally and internally — a very versatile jaw.Ideal for green wood turning.Internal dovetail for holding footed bowls and other footed workpieces.Internal powergrip for holding spigoted workpieces.Note: Although these jaws will fit any Nova chuck, they are not recommended for use with the Precision Midi chuck.Capacity range when used with Nova G3 chuck (45748, sold separately):Expansion mode: 2.126" to 2.874".Contraction mode (square stock): 1.142" to 1.969".Contraction mode (spigot): 1.575" to 2.362".Capacity range when used with Nova SuperNova 2 chuck (48906, sold separately):Expansion mode: 2.126" to 2.874".Contraction mode (square stock): 1.142" to 1.969".Contraction mode (spigot): 1.575" to 2.362".Capacity range when used with Nova Titan chuck (45040, sold separately):Expansion mode: 2.126" to 3.346".Contraction mode (square stock): 1.142" to 2.402".Contraction mode (spigot): 1.575" to 2.835".Features standard on all Nova Jaws:Nova chucks give you the same jaw fixing system and same insert/adapter system across all chuck models. All accessory jaws in the range will fit all the chucks in the range for optimum flexibility. Some, however, are not recommended. See individual jaws for recommendations.Nova chucks are specially designed so the jaws cut into the wood, grip firmly in the contraction mode and provide high tear out strength.

Pages: 1 2 3 4next pagelast page