#3 Accessory Bit for Oneway Termite, 5/8"

This 5/8" accessory ring bit for the Oneway Termite Hollowing Tool (32788, sold separately) offers a broader cutting area for end-grain hollowing and finishing cuts on any flat or curved surface.

$30.49
Buy
 

Related Products

Micro Mesh 3" X 6" 12,000

Micro Mesh 3" X 6" 12,000
$4.49

Micro-Mesh is used to polish surfaces back to clarity or a high gloss. Available in grades 1500-12,000.Micro-Mesh (Grades 1500 through 12000) was originally designed to polish most hard plastics, fiberglass, epoxy, gel-coat, raw and finished wood, cultured marble, sold surface, painted surfaces, gold, silver, etc. Micro-Mesh is not an aggressive stock remover. Common sandpaper products are required for the removal of deep scratches prior to using Micro-Mesh to polish the surface back to clarity or a high gloss. Use wet or dry with either water or water/detergent as a lubricant. You may also use mineral oil, vegetable oil, lemon oil, etc but DO NOT use anything containing solvent as this will delaminate the MICRO-MESH. Sheets are offered in the following Micro-Mesh grades: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000

Slimline Pencil Hardware Kit - Gold

Slimline Pencil Hardware Kit - Gold
$5.99

Attractive and simple, the Slimline Pencil is a great starting point for beginners. Turning this basic design is easy, and the result is a stately and reliable click-action pencil that will write for years. The satin plating has undergone a special process resulting in a slightly textured, matte finish that looks and feels great. Use the bushings, drill bit, and mandrel listed below.Turning Accessories Needed:Necessary blank size: 9/16" x 4-5/8" (Sold Separately) Pen Turning Mandrel (Sold Separately) Slimline Bushing Set (#43546 Sold Separately) 7mm Drill Bit (#36372 Sold Separately) Pen Mill Kit (#47526 Sold Separately) Also Available in:GoldSatin NickelBlack Chrome

Nova 10-in-1 Chuck Gauge

Nova 10-in-1 Chuck Gauge
$15.49

This tool combines all of the turner's most commonly used gauges into one efficient device. It includes a dovetail gauge, diameter gauge, center finder, dowel gauge, angle checker, dovetail marking tool, ruler, protractor and faceplate marking tool. With over 10 functions, you'll work faster and have less clutter around your lathe. Made from heavy-duty polycarbonate. Dovetail Gauge: A fast and easy way to create and check a dovetail recess. Perfect companion for your NOVA chuck.Diameter Gauge: Effortlessly determine the different diameter size of a workpiece. Ideal for cutting beads.Center Finder: Simple and accurate way of finding the center of your workpiece.Dowel Gauge: Doweling can turn dicey when the dowels don't measure up! This gauge helps.Bowl Chisel Gauge: Handy tool checks different angles for bowl chisels.Angle Checker: Checks cutting angles of chisels, knives, blades and scissors with eight commonly used angles.Also features a furniture dovetail marking tool, ruler, protractor and faceplate marking out tool.The only gauge available for Nova chuck jaw dovetail measurements.