Pen Display Tubes

Allows viewers to take a close look at your pens without getting fingerprints on them. Clear plastic provides visibility from all sides and lets in plenty of light for excellent shimmer. Measures 5/8" square x 6" long. Removable cap. Includes 10 display tubes.

$6.99
Buy
 

Related Products

High Friction Build Polish

High Friction Build Polish
$25.99

Protect and preserve your work with a high gloss finish! After sanding your workpieceand applying Cellulose Sanding Sealer (sold separately), sand the sealer lightly when itis dry. Then apply small amount of High Build Friction Polish with a lint-free cotton clothwhile the wood is turning. Once the desired build is achieved, finish with the edge of acarnuba wax stick (sold separately) and burnish with a dry cloth. 500mL.Caution: Flammable. Keep out of eyes and off of skin. Use in a well-ventilated area.

Replacement Tubes for Tec-Pen Kits, 5-Pack

Replacement Tubes for Tec-Pen Kits, 5-Pack
$2.99

Let's face it, every pen turner occasionally blows out a blank or trims it too short. Don't fret, though-this pack of replacement pen tubes has you covered. The brass tubes are precisely dimensioned for smooth action and neat alignment of the final pen. Glue tubes in place with with medium CA (cyanoacrylate) glue or two-part fast drying epoxy.

Micro Mesh 3" X 6" 1500

Micro Mesh 3" X 6" 1500
$4.49

Micro-Mesh is used to polish surfaces back to clarity or a high gloss. Available in grades 1500-12,000.Micro-Mesh (Grades 1500 through 12000) was originally designed to polish most hard plastics, fiberglass, epoxy, gel-coat, raw and finished wood, cultured marble, sold surface, painted surfaces, gold, silver, etc. Micro-Mesh is not an aggressive stock remover. Common sandpaper products are required for the removal of deep scratches prior to using Micro-Mesh to polish the surface back to clarity or a high gloss. Use wet or dry with either water or water/detergent as a lubricant. You may also use mineral oil, vegetable oil, lemon oil, etc but DO NOT use anything containing solvent as this will delaminate the MICRO-MESH. Sheets are offered in the following Micro-Mesh grades: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000