Shape and sharpen all your turning tools with this Tormek Woodturner's Accessory Kit (TNT-708)! You get Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges, a Tool Rest (SVD-110) for scrapers, hollowing tools, and thin parting tools, a Turning Tool Setter (TTS-100T) with built-in edge geometries, a Profiled Leather Honing Wheel (LA-120) for honing and polishing the flute on gouges, a Machine Cover (MH-380), and a Multi-Jig (SVS-50) for skew chisels with a straight or curved edges. You also get a book and DVD devoted exclusively to sharpening turning tools!Compatible with Tormek T-7 and T-3 Models.Technical Details:Shape and sharpen all your turning toolsGouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges - maximum tool width is 25mmTool Rest (SVD-110) for scrapers, hollowing tools, and thin parting toolsTurning Tool Setter (TTS-100T) with built-in edge geometriesProfiled Leather Honing Wheel (LA-120) for honing and polishing the flute on gougesMulti-Jig (SVS-50) for skew chisels with a straight or curved edgesIncludes a book and DVD devoted exclusively to sharpening turning toolsMachine Cover (MH-380) keeps your sharpening tools dust free when not in use
Woodworkers weary of constantly resharpening broken pencil leads will be delighted with this Tool Box Pencil Hardware Kit. It features a massive lead almost 1/4" thick which allows it to be used on rough lumber much like a carpenter's pencil, with very low risk of breakage. A spring-action claw holds the lead. To advance it, simply depress the end of the pencil and pull it out as desired. The pencil also has a sharpener integrated into the end, and when sharp, works equally well for marking out fine lines. Pencil lead is 7/32" (5.5mm) thick perfect for marking rough lumber without breaking.Turning Accessories Needed:Turning Blank (Sold Separately)Pen Turning Mandrel (Sold Separately) Tool Box Pencil Bushing Set (#26862 Sold Separately) 11mm Drill Bit (#30913 Sold Separately)
Achieve a soft preliminary finish on turnings with this lacquer-based sealer. Providesan excellent base for High Build Friction Polish (sold separately) to bring about a highglossshine. 500mL.Caution: Highly flammable. Keep out of eyes and off of skin. Use in a well-ventilatedarea.
Adapt your lathe to use the Carter Hollow Roller Vessel Turning System using this easily installed Mounting Stud! Works with Powermatic 3520 and most lathes with a longer 1-1/8" tool rest post. Includes a second lengthened stud for the secondary tool rest.Technical Details:Adapts your lathe to use the Carter Hollow Roller Vessel Turning SystemWorks with Powermatic 3520 and most lathes with a longer 1-1/8" tool rest postIncludes a second lengthened stud for the secondary tool restMade in USAOne Second Lengthened Stud for the Secondary Tool Rest