These handy little motion-sensor puck lights are an ideal choice for cabinet and drawer interiors - open the door or drawer and the LED light pops on automatically. Close it, and after 20 seconds it turns back off. Installation is designed to interface with other cabinetmaking operations - the puck lights slip right into a 35mm hole, the same size used for the hinge cup on a standard euro hinge. They also feature a magnetic back for use with tools, toolboxes and other ferrous metal surfaces. Batteries included.
This electronically driven automatic blast gate system is an optional upgrade to the iVac Pro Wireless Dust Collection Control System, bringing one-touch simplicity to managing your dust collection airflow. Simply turn on your power tool, and the iVac Pro Tool (42891, sold separately) sends a wireless signal to automatically open the corresponding Pro Blast Gate, and another signal to the iVac Pro Switch (42897, sold separately), which turns on your dust collector. Turn off your power tool, and after a short interval to clear dust, the blast gate closes and the dust collector powers down. This automation prevents the irritating dust clouds that result from forgetting to open a blast gate, and the reduced suction that results from forgetting to close it afterward. The system also ensures that at least one gate stays open when the vacuum is on to prevent overloading the motor on your dust collector. Prevents the irritating dust clouds you get from forgetting to open the blast gateReduces the potential for accidents from reaching for blast gates while machines are runningOptimizes the suction in your system by keeping a minimum number of gates open at one timeBlast gates can also be controlled via the handheld wireless remote or manually with the toggle switchKit includes two blast gates for 4'' hose, two 115v AC adapters, a wireless remote control and a manual toggle switchUp to eight blast gates can operate on one systemAdditional blast gates available separately (52504)RF range: 40'
This Tool Rest is ideal for the grinding of turning scrapers and special tools for woodcarving, e.g. large scorps and inshaves. Also for cabinet scrapers and hollowing tools. It has a generous surface, 90x110 mm (3½"x4¼"), which permits a safe and steady positioning of the tool towards the stone. The bore is made with a special wedge shape, which increases the locking force by 250 %. You can lock the Tool Rest instantly at the chosen angle.Best Used With:35254 -Tormek T-7 Sharpening SystemClick Here to View Instructions:
The generous dimensions of these shimmering iridescent blanks make them ideal for our Stainless Steel Ice Cream Scoop Hardware Kit (34360, sold separately), and our Pizza Cutter Blade Kit (34913, sold separately). They also make great tool handles and turning stock for other projects wider than a pen blank. Approximately 1-1/2" x 1-1/2" x 6".Technical Details:Blank measures approximately 1-1/2" x 1-1/2" x 6"L.Turns very quickly; take care turning with light pressure.Blanks can be finished after turning by sanding to a fine grit and then polishing on a buffing wheel with Corian polish, buffing compound or Hut finishing blocks.Each blank is sold individually.