With five of the most popular turning tools, this set is perfect for the beginning wood turner.Technical DetailsPre-honed for immediate usePerfect for the beginning wood turnerHigh-speed steel blades will hold an edge and last a long timeEach tool measures approx. 15" longMade in England
This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Full Size Round Carbide Turning Tool (48723, sold separately) to get smooth finishes on curved, concave surfaces.Features:R2 replacement cutter measures approximately 0.60'' in diameter.Ideal for giving you a smooth finish on curved, concave surfaces and for general turning applications.Cutter rotates, giving you numerous fresh edges with no need for sharpening.Sharpened on a diamond wheel to 1500 grit.Solid carbide stays sharper for longer, when compared with steel.
Tool Box Pencil Hardware Kit: Woodworkers weary of constantly resharpening broken pencil leads will be delighted with this Tool Box Pencil Hardware Kit. It features a massive lead almost 1/4" thick which allows it to be used on rough lumber much like a carpenter's pencil, with very low risk of breakage. A spring-action claw holds the lead. To advance it, simply depress the end of the pencil and pull it out as desired. The pencil also has a sharpener integrated into the end, and when sharp, works equally well for marking out fine lines. Pencil lead is 7/32'' (5.5mm) thick perfect for marking rough lumber without breaking. Replacement leads available separately (36026). Turning Accessories Needed: Turning Blank (Sold Separately) Pen Turning Mandrel (Sold Separately) 11mm Drill Bit (#30913 Sold Separately) 3-Piece Bushing Set: Bushings are precisely machined to match the diameters of your pencil blanks, allowing you to achieve the smooth, perfectly flush seams so valued in a top quality hand-turned pencil. Simply turn your pencil blanks to match the bushing diameters, leaving a bit of extra material to allow for sanding. The Tool Box Pencil Bushing Set is made of steel—hard enough for excellent durability, yet soft enough to prevent damage to your turning tools.3-piece bushing set.
These collets are for use with the Robert Sorby Sovereign Turning Handles (e.g. 44540, sold separately). The collets reduce the size of the opening on the Sovereign Handle, allowing it to be used with a wide variety of turning shanks. They are made of machined aluminum, and are available in 3/8" and 1/2" sizes, as well as a tang model.Technical Details:Collets are made from machined aluminum to precise tolerances.Use the 1/2" collet (47155, sold separately) for the TurnMaster shanks (e.g. 45649, sold separately).Note: American-made tools are measured by bar diameter while European brands are measured by flute size. So the 3/8" collet is designed for a European 1/4" gouge, the 1/2" collet for a European 3/8" gouge, and a European 1/2" gouge will fit directly into the Sovereign handle.