Whether you're a hobbyist or a professional woodworker, Rockler's 2-1/2'' Louver Shutter Template Set makes building your own Plantation-style Shutters easy and affordable. Build movable louver styles and save up to 75% over the cost of custom ordered shutters! It couldn't be easier with exclusive Rockler jigs, hardware, and pre-shaped louvers.Featuring Hidden Control Arm Functionality! Rear-mounted control arms lend a clean, modern look to your wooden shutters, and this jig (45143, sold separately) makes it easy to drill the necessary holes without splitting. The kit includes a jig and a self-centering drill bit. Just slip the jig over the end of the louver, and use the bit to drill a perfectly placed pilot hole to accept a nail for the control arm. In addition to the Louver Template Set and Hidden Control Arm Jig, you will need a Hidden Control Arm (49991, sold separately) and for added convenience, Stainless Steel Nails (45400, sold separately).Plus, with our online Shutter Design Wizard, you'll get a FREE Downloadable Plan for creating custom shutters, complete with detailed technical drawings, cross-section diagrams, elevations, and lists of all the supplies you need to complete your project! Before entering your dimensions into the design wizard, consult the Measuring Guide to determine your final shutter panel dimensions. Features: Easy, do-it-yourself jigs and templates for creating movable or fixed plantation-style shuttersSave up to 75% over the cost of custom ordered shuttersJigs make it a fool-proof process for drilling louver and control arm holesIncludes three self-centering bits for drilling shutter pin holes and control arm holesDrill bits have self-centering tips that fit perfectly into specific shutter template mounting holesA spring-loaded guide in the drill bits retract as pressure is applied and the drill bit advancesHidden Control Arm Jig: Drilling Jig for Hidden Shutter Control Arm features an extruded aluminum fence and a thick, laser-cut acrylic template. Self-centering drill bit ensures precise hole location, which is critical for even spacing of your louvers.
Using CA glue to finish your pen turnings results in a lustrous, glossy polish,but it can also fuse your pen blank to the bushings. Not so with these non-stick polyethylene bushings in place, however. These bushings are made fromUHMW, the same super-slippery polymer used in our Plastic Jig Stock. They'repre-drilled for a standard mandrel, and have a 60° taper so they'll fit most anysize pen bushing. Just swap these for your metal bushings once the pen isturned, and apply your finish. 4-Pack.Technical Details:Non-Stick Pen Bushings are made of UHMW (Ultra-High Molecular Weight)polyethylene.Pre-drilled for a standard 7mm mandrel (e.g. 43537, sold separately).60° cone-shaped taper fits any size pen bushing.After shaping the pen blank, replace the metal bushings with non-stick plasticbushings and apply your CA finish.Self-lubricating UHMW has a low coefficient of friction, so it sheds glue easily.Very stable - 10x heavier than regular high-density polyethylene.High abrasion resistance and high impact strength even at low temperatures.Resistant to chemicals.
Choose from Self-Centering Doweling Jig or Complete Doweling Kit with glue and dowel pins.Technical Details:Self Centering Doweling Jig (49221):Maximum 2" capacity with boring sizes: 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2"Plated to prevent rustComplete Doweling Kit (10488) Includes:(1) Self Centering Doweling Jig (49221)(1) pint of Titebond glue(100) 1/4" x 1-1/2" dowels(100) 3/8" x 1-1/2" dowels(50) 3/8" x 2" dowels(50) 5/16" x 2" dowels(2) each of the following nickel plated dowel centers: 1/4", 5/16", 3/8" and 1/2"
With a sleek design and integrated soft-closing action, these Salice hinges set a new standard for aesthetics and technology in a concealed hinge. Unlike other soft-close models, the decelerating system is built directly into the hinge and stays out of sight under an attractive, integral cap. Unprecedented three-way cam adjustability allows for simple and precise door alignment. No add-on parts, so installation is a breeze and the adjustment screws stay unobstructed. Self-lubricating, with a full 110° opening capacity. Bright nickel-plated steel construction. This hinge is compatible with the JIG IT Hinge Plate Template for Inset Door Hinges #56585 (Sold Separately) for faster, more precise installation.Note: The included spacer applies to situations where drilling a 13.5 mm cup hole risks boring through the face of the door (e.g. if the door's thickness is reduced by a profiled edge). It adds 1.2 mm of space "above" the surface of the door, allowing for a shallower cup hole while maintaining proper hinge function. This hinge is compatible with the JIG IT Hinge Plate Template for Inset Door Hinges #56585 (Sold Separately) for faster, more precise installation.