Use the 9/32" Pro Shelf Bit with the Rockler Pro Shelf Drilling Jig (31571, sold separately) when you plan to install 1/4" shelf pin supports with pin sleeves.
With a sleek design and integrated soft-closing action, these Salice hinges set a new standard for aesthetics and technology in a concealed hinge. Unlike other soft-close models, the decelerating system is built directly into the hinge and stays out of sight under an attractive, integral cap. Unprecedented three-way cam adjustability allows for simple and precise door alignment. No add-on parts, so installation is a breeze and the adjustment screws stay unobstructed. Self-lubricating, with a full 110° opening capacity. Bright nickel-plated steel construction. This hinge is compatible with the JIG IT Hinge Plate Template for Inset Door Hinges #56585 (Sold Separately) for faster, more precise installation.Note: The included spacer applies to situations where drilling a 13.5 mm cup hole risks boring through the face of the door (e.g. if the door's thickness is reduced by a profiled edge). It adds 1.2 mm of space "above" the surface of the door, allowing for a shallower cup hole while maintaining proper hinge function. This hinge is compatible with the JIG IT Hinge Plate Template for Inset Door Hinges #56585 (Sold Separately) for faster, more precise installation.
With the six jigs in this kit, you'll be able to shape and sharpen all your knives, scissors, shears, draw knives and axes, as well as short chisels and carving tools. Each jig perfectly replicates the edge angle so you can sharpen faster than ever. The jigs in this kit work with the T-7 and T-4 Tormek Sharpening Systems (35254 and 53332, sold separately) as well as the older T-3 system. The Knife Jig (SVM-45) works to sharpen most knives, including carver's draw knives. Long knives need to be stiff, and the minimum blade length is 2-3/8'' (60mm)The Long Knife Jig (SVM-140) is suitable for long and flexible knives. The jig's 5-1/2'' (140mm) width stabilizes a thin blade. Requires minimum blade length of 6-5/16'' (160mm)The Scissors Jig (SVX-150) is for scissors of all sizes as well as shears. It is also suitable for portable electric hand planer bladesThe Short Tool Jig (SVS-32) is for straight-shanked carving gouges and V-tools down to 1-3/4'' (45mm) long. It also sharpens short wood chisels and tools for power carvers. Maximum tool width is 1-1/4'' (32mm)The Axe Jig (SVA-170) sharpens carving and carpenter's axes. It accommodates a maximum axe height of 6-11/16'' (170mm), and copes with both straight and curved edgesThe Small Knife Holder (SVM-00) enables you to sharpen the smallest knife blades like carving knives and pocket knives. Works in conjunction with the SVM-45 Knife Jig