Elegant and durable, Soss invisible hinges are completely concealed when the cabinet door is closed. Available in Black, Satin Nickel and Satin Brass finishes.Soss hinges require mortises in the door and door stile for installation.Designed for use with inset doors.Wings on #35294 measure 3/8" W x 1- 11/16" L. (Minimum wood thickness: 1/2" ).Wings on #36991 measure 1/2" W x 2-3/8" L. (Minimum wood thickness: 3/4" ).Best used with the Soss Routing Jig (Sold Separately). Designed to ensure accurate hinge mortises.
Your doors will swing smoothly and line up neatly every time with our JIG IT templates to guide your way. Just butt the template up against the face of your cabinet and use a centering bit to drill perfectly positioned mounting holes for a wide variety of concealed hinges. See the compatibility info below for a list of which hinges are compatible with this template. Requires centering bit 68991 (sold separately). For even faster, more foolproof installation, use several of these templates mounted on one of our T-track rails (e.g. 26420, sold separately).For easier mounting of the cup plate from two-part Euro-style hinges, check out the JIG IT Deluxe Concealed Hinge Drilling System. It works with your handheld drill and sets up so you can bore precisely spaced hinge cup mounting holes on multiple doors.JIG IT Hinge Plate Template D Installs hinges: 33600, 36778, 49513, 47967,23261, 55926, 55933, 23554Use with #6 Self Centering Bit (68991, sold separately)These hinges are used on frameless cabinetsClear acrylic for easy alignment with your marksAlso includes T-track mounting hole for repeatable alignment and placement of hingesHole spacing and setback measurements are conveniently printed on the acrylic face for referenceStable, durable polymer fence
Set and measure edge angles quickly and easily for accurate knife and tool sharpening with the Tormek AngleMaster WM-200! Works easily in two ways: use it to set a jig to a grindstone so it grinds your tool at any desired edge angle from 10° to 75°, or use it to measure an existing edge angle on a tool. The AngleMaster is the easiest way to get an exact setting regardless of the degree of stone wear! Adjusts to any stone diameter from 10" (250 mm) to 6" (150 mm) and has handy built-in magnets that keep the AngleMaster close to your shop tool for easy reference. Works with both the Tormek T-7 (35254) and T-3 (33377) Sharpening Systems.Grind your tool to any desired edge angle from 10° to 75° with an accuracy of 1°Use it to measure an existing edge angle of a toolMeasure the edge of a knife or bowl gouge using the measuring groovesDiameter compensator may be set to the stone diameter in steps of 5mm (3/16") and automatically transfers metric to standard measurementsBuilt-in magnets let you affix the tool to any machine for easy reference
The versatile Universal Support is the basis of the Tormek system, and this upgrade for older models incorporates a micro adjust feature for exact and fast fine setting. It is made of 12mm (approx. 1/2") round steel and has a double mounting for maximum stability.The Universal Support can be placed either in the vertical sleeves or in a horizontal base. These two positions enable you to grind either toward or away from the edge. The Universal Support can also be placed horizontally for honing with jigs, but honing must always be done with the wheel turning away from the edge.