Flush Mount Miter Slot Hardware Kit

This package lets you fix jigs to any standard miter slot &#8212 with no protruding knobto get in the way. Perfect for crosscut sleds or any jig requiring a smooth surface foroperation.Includes two expandable miter slot adapter to fit any standard 3/4" wide x 3/8" deepmiter slot, as well as 2 each of two different length screws for use with either 1/2" or 3/4"material.

$6.99
Buy
 

Related Products

Pro Shelf Drilling Jig with 1/4'' Shelf Drilling Bit and Case

Pro Shelf Drilling Jig with 1/4'' Shelf Drilling Bit and Case
$111.47

Just lay the jig on your stock, tighten the two horizontal tracking knobs and start drilling error-free rows.Guarantees each row is perfectly in lineSpaces each hole exactly 37mm from the edge of your stockJig is easy to set up and easy to adjust for multiple rowsRows are spaced exactly 1-1/4" (32mm) apartPin holes are set back exactly 1-7/16" (37mm) from each edge32mm spacing and 37mm setback are fully compatible with the Euro hinge system24" long twin template tracks are joined by rigid rails that lock in place for error-free drillingDrill two rows with one jig to save time and ensure accuracyLocking 3-star tracking knobs allow for adjustments and ensure the jig stays firmly in placeReversible guide rails have a smooth aluminum surface on one side and a rubber fence on the other for better gripping powerIncludes two 5mm and two 1/4" indexing pins that eliminate the need for clamps and allow you to extend long rows of holes indefinitelyIncluded indexing pins store conveniently in the ends of each guide rail when not in useDrilling template is made of thick acrylic for durabilityDesigned for un-assembled cabinet components from 8-1/4"W to 25-1/4"W Self-Centering Drill Bits:Self-centering bits are pre-set to bore a consistent depth for perfect fitting shelf pins and sleeves every time. No adjustments are necessary! Various bit sizes available separately for both shelf pins and shelf pin sleeves. Decorative metal shelf pin sleeves provided added shelf strength.#40604 - 1/4'' Bit for 1/4'' Shelf Pin#40608 - 5mm Bit for 5mm Shelf Pin#41983 - 9/32'' Bit for 1/4'' Shelf Pin Sleeve#41981 - 7/32'' Bit for 5mm Shelf Pin Sleeve

Rockler 1/4'' Dowel Drilling Jig Kit

Rockler 1/4'' Dowel Drilling Jig Kit
$17.99

Jig Includes Drill Bit, Stop Collar, and Stop Collar Wrench for Added Convenience!An incredibly affordable doweling jig for those who want a quick joint without the fussy layout.Rockler Doweling Jigs are transparent, you need only set the two parts together, strike a line across the face of the joint and line up the jig.Made to last with a 3/16" acrylic faces and hardened steel drill guides.1/4" guide has holes spaced 3/4"-on-center.Also Available from Rockler:Rockler 3/8" Dowel Drilling JigRockler 1/2" Dowel Drilling JigTechnical Details:Delivers a quick joint setup in just a moment of timeNo need to transfer marks from the face to the edge, or measure and mark with a tape measureSimply set your two parts together, strike a line across the face of the joint and line up the jigMade to last with a 3/16" acrylic face and hardened steel drill guides1/4" guide has holes spaced 3/4"-on-centerJig is designed to center dowel holes on 1/2" thick stock.Drill BitStop Collar and Stop Collar Wrench

Armor STC-HV50 Auto-Adjust Hold-Down Toggle Clamp with Low-Profile Vertical Base Plate

Armor STC-HV50 Auto-Adjust Hold-Down Toggle Clamp with Low-Profile Vertical Base Plate
$25.99

Armor Auto-Adjust toggle clamps automatically adjust for different thicknesses of material, eliminating the need to readjust the clamp when changing stock. Whether you're clamping a standard piece of 3/4'' stock or a thin sheet of veneer, one flip of the lever is all it takes to secure your work. The clamp has a low-profile, vertically oriented baseplate, making it ideal as a hold-down clamp for the perimeter of jigs, fixtures, workbenches and assembly tables. When closed, it maintains a horizontal orientation so it won't obstruct your work. Clamping force is easily adjustable-simply rotate the adjustment screw to increase or decrease the pressure. Once set, it stays the same for all thicknesses-just set it and forget it. The threaded post allows additional adjustment range when needed. Auto-Adjust: Armor's Auto-Adjust technology automatically adjusts to variations in workpiece dimensions while maintaining consistent clamping pressureAdjustable Clamping Pressure: The integrated adjustment screw is used to create a wide range of clamping pressures. Rotate the screw clockwise to decrease and counterclockwise to increase the clamping forceStrong, Lightweight: Auto Clamps are constructed of ZAMAK Zinc alloy, which allows for an incredibly strong, lightweight toolOne-Handed Operation: Armor's Auto-Pro AutoClamps are designed for one-handed operation, a huge advantage over the competitionVertical Base Plate: Low-profile right-angle baseplate makes it easy to secure this clamp to the edges of jigs, fixtures, workbenches and assembly tablesLarge Soft-Grip Handle: Features soft insets for maximum grip and comfort