This futon plan lets you choose from different arm styles! Build either Mission-style armrests or a rounded, more contemporary style. Sized to fit a full-size futon mattress. Futon bed hardware sold separately. This plan uses roller hardware that is inexpensive, durable and easy to use. It includes a pattern for creating a jig to make the routing easy (routing is required to install the roller hardware). The roller kit and fastener kit together include all the parts needed to assemble plan 37761. The Roller Kit (38437) is available separately for use on your own design.
Micro Jig Splitter SteelPro is constructed from a 100% polycarbonate shell and reinforced with a solid stainless steel core. The SteelPRO employs another groundbreaking innovation for table saw safety and efficacy: The Dual Splitter. This allows the splitters to control the pressure on the keeper piece AND the off-cut piece by the thousands on an inch. This will virtually eliminate any chance of kickback on the table saw and greatly reduce the chance of severing fingers. For Thin Kerf, range of 0.090"-0.118"The splitters are simple to install and simple to use. We include an easy to follow drill-guide template to install the SteelPro System into your Zero Clearance Insert (ZCI). Keep using the MJ Splitter SteelPro with Plug N' Play ease. Remount and remove the Splitters in two seconds. Make no compromises in safety. Make table saw rips safer and prevent kickback!Technical Details:For a Thin Kerf range of 0.090"-0.118" Use for 90° cuts onlyMade of 100% polycarbonate shell and reinforced with a solid stainless steel coreThe Dual Splitter controls the pressure on the keeper piece AND the off-cut piece by the thousands on an inch
Using CA glue to finish your pen turnings results in a lustrous, glossy polish,but it can also fuse your pen blank to the bushings. Not so with these non-stick polyethylene bushings in place, however. These bushings are made fromUHMW, the same super-slippery polymer used in our Plastic Jig Stock. They'repre-drilled for a standard mandrel, and have a 60° taper so they'll fit most anysize pen bushing. Just swap these for your metal bushings once the pen isturned, and apply your finish. 4-Pack.Technical Details:Non-Stick Pen Bushings are made of UHMW (Ultra-High Molecular Weight)polyethylene.Pre-drilled for a standard 7mm mandrel (e.g. 43537, sold separately).60° cone-shaped taper fits any size pen bushing.After shaping the pen blank, replace the metal bushings with non-stick plasticbushings and apply your CA finish.Self-lubricating UHMW has a low coefficient of friction, so it sheds glue easily.Very stable - 10x heavier than regular high-density polyethylene.High abrasion resistance and high impact strength even at low temperatures.Resistant to chemicals.
With a sleek design and integrated soft-closing action, this Salice hinges set a new standard for aesthetics and technology in concealed hinges. Unlike other soft-close models, the decelerating system is built directly into the hinge and stays out of sight under an attractive, integral cap. Unprecedented three-way cam adjustability allows for simple and precise door alignment. No add-on parts, so installation is a breeze and the adjustment screws stay unobstructed. Self-lubricating, with a full 110° opening capacity. Bright nickel-plated steel construction. This hinge is compatible with the JIG IT Hinge Plate Template B #57706 (Sold Separately) for faster, more precise installation.