Kreg Deck Jig System

The best helper you'll ever have for building decks, fencing and more! This jig guides you as you drill and drive deck screws at the optimal angle to achieve concealed fastening of deck boards. No more exposed nails or screws! An easy grip handle and 90° alignment tab make setup extremely easy. The onboard drilling jig is preset at the optimal angles for straight-on as well as left and right corner fastening. Simply drill your holes with the included bit and drive the deck screws with the included square drive bit. Spacer rings are included to ensure uniform, accurate spacing of deck boards.Additional Features:Includes the Deck Jig, 6" drill bit, 6" KTX square driver bit, 100 Protec-Kote deck screws, three 5/16" spacer rings, three 1/4" spacer rings, two stop collars, allen wrench, instructional DVD and durable carrying case.For stock from 3/4" to 1-1/8" thick.

$79.00
Buy
 

Related Products

Multi Track for Jigs and Custom Fences-Multi Track

Multi Track for Jigs and Custom Fences-Multi Track
$24.99

With Universal T-Tracks on every face, these 36" tracks are full of potential - use them to create custom fences, jigs and fixtures. Once assembled, the multiple tracks give you countless options for attaching stops, hold-downs, sub-fences and more. Available in 2-1/4" and 3" heights. Multi Track Brackets and Flip Stops sold separately.Technical Details:Universal T-tracks accept all three major accessory fasteners: 1/4" T-bolts, 1/4" Hex Bolts and 5/16" T-boltsSolid extruded aluminum construction for strength and durability3/4" ThickT-tracks are spaced 3/4" apart (on center) for simple assembly and optimal utility

Rockler Porter-Cable Dovetail Jig Replacement Router Bit - 13/32" Dia x 1" H x 1/2" Shank

Rockler Porter-Cable Dovetail Jig Replacement Router Bit - 13/32" Dia x 1" H x 1/2" Shank
$17.99

This is a replacement straight router bit for the 4212 Porter-Cable 12" Dovetail Jig (29550, sold separately). Use it for box joints. Two flutes for optimal chip removal, with an overall Length of 2-1/2". Diameter is 13/32" and carbide height is 1".

JIG IT Hinge Cup Drilling Jig, 5mm Tab

JIG IT Hinge Cup Drilling Jig, 5mm Tab
$9.99

Here's an accurate and inexpensive way to set up your drill press for boring the large diameter holes required for cup hinges. Simply align your fence with the hole in the jig, then tighten down your fence. You'll get consistently accurate holes with a perfectly set ''tab'' for your hinge. Set up couldn't be any easier! Made in USA. Appropriate ''tab'' (distance from door edge to edge of cup hole) is laser-etched onto the JIG-ITMade from stable, durable HDPE materialDrilling jigs available for 35mm and 26mm hinge cup holes