This handy base accepts your Kreg Jig Drill Guide and connects to most Kreg Face Clamps. Allows your jig to be used as 2-tools-in-1: as a sturdy benchtop jig utilizing the benchtop base for high-speed production Pocket-Holes, and as a contractor-grade jig for work on the road!Secures to most Kreg Face ClampsCan be clamped vertically to your work surface using a standard "C" clampEnsures proper drilling depth by setting your drill guide block at the proper height for various material thicknessesIncludes brass positioning pinMade in USA
Tightening Rockler's new Auto-Lock T-Track Hold Down Clamp is literally an open-and-shut case-just press down the lever to secure anything from veneer sheets to lumber up to 2-3/4'' thick! Once set, the clamping pressure is always the same regardless of workpiece size, and is adjusted only if needed with the set screw. The clamp pivots 360°, allowing you to clamp near the workpiece edge to minimize obstructions. A large knurled wheel locks the clamp securely to the T-track. The toggle foot is adjusted with the knurled aluminum knob for best placement-no wrenches required-while the clamping foot pivots on a ball joint so it can adapt to any angle and is rubber coated to prevent marring. Simply lift the lever to release. Auto-adjust mechanism allows you to clamp various thicknesses without readjustingCenter of clamping foot extends from 1-1/2'' to 3-1/2'' from center of trackMax height capacity is 2-3/4''Clamping force is adjustable from 5-250 lbs of pressureLarge locking wheel secures clamp to T-trackClamps slide into any T-track that accepts 5/16'' T-bolts, including our T-Track Table (46654, sold separately) and many of the CNC Shark tablesAn optional Mounting Bracket (57940) is available for securing the clamp to shop-made jigs and fixturesHeavy-duty metal construction
Once attached to a bench or fixture, this clamp works great as a quick-action hold down for jigs or as a simple way to secure a work piece. Its holding capacity is approximately 200 pounds.Bottom of rubber foot adjusts from 1/4" above mounting surface to 3/8" below mounting surface. Total length with arm extended and T-handle up is 2-5/8". Height is 2-1/4".Mounting plate is 1-9/16" W x 1" L.Does not include mounting screws.
Mark Duginske shows you how to precisely tune and accurately use your bandsaw to achieve optimum performance. Now re-issued in DVD format, this classic Fine Woodworking video workshop takes you right into an expert woodworker's shop.You'll see firsthand how to do the work, the tools, the techniques, and the subtle rhythm of each process.57 minutes.In this DVD you'll also see how to: change blades effortlessly, resaw boards from firewood, cut your own veneer, make perfect dovetails, build a circle jig, cut perfect cones, and create bandsawn boxes.Mark Duginske, author of the books Mastering Woodworking Machines and The Bandsaw Handbook, is a professional woodworker and has developed a variety of successful power tool accessories.